avantalk Clan N1 Active Noise Canceling Earbuds User Manual
- May 15, 2024
- Avantalk
Table of Contents
Clan N1
Quick Start Guide
Item No.: ATBH-TW22
Product Overview
To INCREASE volume:
Single tap the touch button on the R earbud.
To DECREASE volume:
Single tap the touch bution on the L earbud.
Charging
To charge the earbuds:
To charge the case:
The LED on the case vl flash red when outbattery. Connect the case to a 5V/500mA_2A rated USB charger or PC USB port [0 charge.
Use with Phone
When first removed from the charging case, the earbuds will enter pairing mode
automatically (LED will flash BLUE and RED).
Select “Avantalk Clan N1” in your phone’s Bluetooth menu.
Subsequent Use
For subsequent use, your earbuds should automatically reconnect to the last-
paired device within a few Seconds when taken out of the case. If not, you can
manually iniiate reconnection by selecting “Avantalk Clan N1” in Your device’s
Bluetooth men.
NOTE: The ClanN1 does not have a manual pairing mode. If you want to
paira different device, you need to disconnect from the currently paired
device in order to enter the ClanNTinto pairing mode.
Online Support
Troubleshooting & FAQ
- How to adjust volume on the Clan N1?
- How to factory reset / clear pairing history of Clan N1?
Need further assistance?
Visit avantalk.com/support
http://avantalk.com/product-support/clan-n1
Contact Us
Support Tickets
avantalk.com/submit-a-ticket
support Email support@avantalk.com
USA/CA +18002322078 (Sam-6pm PST, MonFri)
UK +4420 8068 2023 (9am-6pm, GMT, Mon-Sat)
FAQ avantalk.com/support/clan-n1
Product Registration See QR code on the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>