frisco 238153/238154 42″ Heavy Duty Faux Fur Cat Tree Instruction Manual
- June 7, 2024
- frisco
Table of Contents
CAT TREE
INSTRUCTION MANUAL
SKU# 238153,238154
OVERALL DIMENSIONS
34.5 in Lx 18.7 in Wx48 in H
87.5cmLx47.5 cm Wwx 122 cm H
BASEBOARD DIMENSIONS
29.25 inLx 18.7 in W
74cmLx47.5cm W
WARNINGS & CAUTIONS
PLEASE READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS TO AVOID PET INJURY OR PROPERTY DAMAGES.
- Keep all tools and instructions in a safe place for future reference.
- Follow the instructions carefully and make sure you’ve completed each step.
- This cat tree is intended for cat use only, please keep children away.
- Keep all small parts away from children/pets to avoid choking hazards.
- Never climb, rock, shake, step or hang on the cat tree.
- Place your cat tree indoors, away from direct sunlight or damp areas.
- Cat trees should be placed on a flat, level surface for stability.
- Check your cat tree often for loose screws or parts that might need re-tightening.
- If your cat tree gets torn or damaged, please discard it.
- The product photo may vary slightly from your fully assembled cat tree as this product is continually being enhanced.
CLEANING INSTRUCTIONS
Spot clean stains and vacuum fur (using small handheld or attachment) when necessary.
COMPONENTS
Prior to assembly, be sure to identify and sort all components shown below.
| 
---|---
ASSEMBLY INSTRUCTIONS
STEP 1
For easier assembly, insert all 3 posts inside to frame the apartment from
each corner.
Use the wrench key to locate and align the holes between the apartment board
and post, then loosely attach the screws at both ends without completely
tightening. Repeat for all corners. Then, tighten all 6 screws to finish
apartment assembly.
STEP 2
STEP 3
STEP4
STEP 5
FULL ASSEMBLY
Documents / Resources
|
frisco 238153/238154 42" Heavy Duty Faux Fur Cat
Tree
[pdf] Instruction Manual
238153, 238154, 42 Heavy Duty Faux Fur Cat Tree
---|---