ifi ZEN Hi-res DAC amp User Guide
- June 7, 2024
- ifi
Table of Contents
ifi ZEN Hi-res DAC amp User Guide
Find your zen
- Get a major uplift in music enjoyment with the ZEN DAC.
- Headphone joy. Work or play, connect via USB to your computer/laptop and stream Bit Perfect audio through your iEMs/headphones or active speakers.
- Multi-talented. Use ZEN DAC as a pre-amp by hooking up the balanced 4.4mm output at the rear via XLR to a balanced amplifier/active speaker.
- Now using the 16 core XMOS Chip which allows the product to fully decode MQA and run DSD256 on the same firmware due to the extra processing power of the chip.
- New and improved low jitter clock with >20dB better performance.
FEATURES
- Formats: PCM/Bit Perfect DSD & DXD
- Digital inputs: USB3.0 (USB2.0 compatible)
- Analogue outputs: 6.3mm Unbalanced/4.4mm Balanced/RCA
- PowerMatch adjustment for iEMs/On & Over Ears
- TrueBass to add bass to iEMs
- Precision analogue volume control
Specifications
| Input | USB3.0 B Socket (USB2.0 compatible) |
|---|---|
| Formats | 44.1/48/88.2/96/176.4/192/352.8/384kHz 2.8/3.1/5.6/6.2/11.2/12.4MHz |
DSD 353/384KHz DXD MQA
DAC| Bit-Perfect DSD & DXD DAC by Burr Brown
Line Section
Output
Balanced 4.4mm:| 2V / 6.2V max. (variable) 4.2V fixed
UnBAL RCA| 1V / 3.3V max. (variable) 2.1 V fixed
Zout
Balanced| <= 2000
UnBAL| <= 1000
SNR| <-116dB(A) @ OdBFS (UnBAL/BAL)
DNR| >116dB(A) @ -60dBFS (UnBAL/BAL)
THD+N:| <0.0015% @ OdBFS (UnBAL/BAL)
Headphone Section
Output
: Balanced 4.4mm| 2V / 6.2V max. 120- 600
UnBAL 6.3mm:| 1V / 3.3V max 120 – 3000b
Output Power
Balanced| >380mW @ 500; >70mW @ 600
UnBAL| >280mW @ 320; >36mW @ 300
Output Impedance| <10 (UnBAL/BAL)
THD+N:| <0.005% (125mW @ 320)
SNR| >113dBA (3.3V UnBAL / 6.2V BAL)
Power consumption| No Signal —0.5W
Max Signal —2.5W
Dimensions| 158 x 117 x 35 mm
6.2″ x 4.6″ x 1.4″
Weight| 491 g (1.08 lbs)
Warranty period:| 12 months
Specifications are subject to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>