LINKLIFE Drago Folding Adjustable Weight Bench FBMBK0153 Instruction Manual
- June 7, 2024
- LINKLIFE
Table of Contents
LINKLIFE Drago Folding Adjustable Weight Bench FBMBK0153 Instruction Manual
ASSEMBLY INSTRUCTION
STEP 1.
The screw in feet stabilizer is pre-installed, if you install, you need loose
them at first with the wrench we provide like the picture shown.
After loosing the screw, you need insert the foot satbilizer to the tube under
the cushion.
After inserting the stabilizer, use the screw to lock the tube tightly, and
the other side is same operate like this one.
STEP 2.
Use the ball pin insert the hole in the middle position of foot tubes. Make
sure the ball pin totally insert. C3.
Step3.
The leg guard postition is adjustable, choose C the suitable level fits for
yourself.
Make sure the blot lock tightly.
NOTICE
If you want to adjust the bench angle, you don’t need to screw all the part
out, just turn the knob for a few round and pull up the the knob can adjust
the angle which fits for yourself.
After inserting the stabilizer, use the screw to lock the tube tightly, and
the other side is same operate like this one.
