magic BULLET MB50200 Personal Blender and Food Processor User Guide

: June 7, 2024
: Magic Bullet

magic BULLET MB50200 Personal Blender and Food Processor

Important safeguards

Warning! To avoid the risk of serious injury, carefully read all instructions
before operating your Magic Bullet Kitchen Express™. When using any electrical appliance, basic safety precautions should always be observed, including the following important information.

Save these instructions!
FOR HOUSEHOLD USE ONLY

GENERAL SAFETY INFORMATION

This appliance is NOT intended for use by children.
Keep the appliance and its cord out of reach of children.
Children shall not play with the appliance.
The appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involve.
To protect against fire, electrical shock and injury to persons, do not immerse the appliance, its motor base, cord or plug in water or any other liquid.
Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.

AVOID CONTACT WITH MOVING PARTS.

Regularly inspect the power supply cord, plug, and motor base for any damage.
Do not operate this appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
CAUTION: In order to avoid a hazard due
to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

BLADES ARE SHARP! HANDLE CAREFULLY!
DO NOT BLEND HOT INGREDIENTS OR LIQUIDS!

Excessive pressure from heated ingredients can cause the vessel and base to separate and cause thermal injury. Only use room temperature or cooler ingredients.

Do not attempt to defeat the cover interlock mechanism.
Do not overfill the bowl, making sure to stay at or below the MAX line. Overfilling the bowl can cause damage to the bowl and can cause the ingredients to leak.
To reduce risk of injury, never place a chopping blade or slice/shred disc on the base without first attaching the bowl properly in place.
To prevent overheating and pressure build up, never allow the Magic Bullet Kitchen Express™ to run for more than one minute at a time. Ingredients can begin to heat up which will add pressure inside the cup or bowl that may cause it to separate from the motor base and cause personal injury or property damage.
The use of attachments not recommended or sold by NutriBullet® may cause fire, electric shock, or injury.
This appliance is for household use only.
Do not use it for anything other than its intended use.
Do not let the power cord hang over the edge of a table or counter top.
Do not let the power cord touch hot surfaces, such as a stove or let it become tangled or knotted.

Always make sure the bowl is securely locked in place (with lid on and locked) before the motor is turned on. Do not attempt to remove the bowl or lid while the unit is in operation

Make sure the unit is turned off after each use. Ensure its power is set to OFF, the motor has stopped, the blade or disc has completely stopped moving, and the unit is unplugged before disassembling.
Turn the motor off and ensure that all moving parts have stopped before disassembling this appliance to remove food.
Never store the cross blade in the motor base without a cup attached. The exposed blade can present a very dangerous hazard.
Do not use this appliance if any parts appear to be damaged. If you have any questions or concerns, please contact customer service.
Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.

FEED CHUTE

Do not overload or jam the feed chute with too much food.
When using the food pusher, never use excessive force to push food down the feed chute.
Wait until food naturally moves down the feed chute and into the bowl before adding more food.
Do not push food into the feed chute with your fingers or utensils. Only use the food pusher provided. Do not place hand or fingers into the feed chute. If food becomes lodged in the feed chute, use the food pusher provided or another piece of fruit or vegetable to push it down.

ADDITIONAL SAFEGUARDS

Remove and safely discard any packaging material or promotional labels before using the unit for the first time.

Prior to your first use, safely discard, out of reach of children, the protective cover on the power plug to eliminate a choking hazard.
Do not put any non-food items in any of the appliance pieces, as doing so may damage the unit and or cause severe personal injury or property damage.
Do NOT attempt to use a cup and blade assembly from another Magic Bullet with the Kitchen Express. ONLY use the cup and blade assembly that comes with your Kitchen Express unit.

Always make sure the unit is properly and completely assembled before connecting to power outlet and operating.

Ensure that the surface where the appliance operates is stable, level, clean and dry.
Vibration can occur during normal operation.
Any significant spillage onto the surface under or around the appliance, or onto the appliance itself, should be cleaned and dried before continuing to use the appliance.
When using this appliance, provide adequate air space above, below, and on all sides for circulation.

This appliance is not intended to be an ice crusher. Attempting to crush ice may cause permanent damage to the cross blades or cause the unit to malfunction, resulting in personal injury or property damage.
Make sure you have removed any rind from fruit prior to adding to the bowl.
Do not use fruits that contain seeds or pits unless they have been completely removed
Do not leave the appliance unattended while in use.
Keep hands, fingers, hair, clothing as well as spatulas and other utensils away from the appliance during operation, blending, and away from moving blades or discs while processing food, to reduce the risk of severe injury to persons or property damage. A scraper may be used but must be used B UT ONLY WHEN THE APPLIANCE IS OFF.
Keep the appliance clean. Refer to the care and maintenance section for tips and best practices.
Any maintenance other than cleaning should be performed by an authorized Service Center.
Do not attempt to repair or service this appliance, contact Customer Service for assistance at service@nutribulletretail.com or info@nutribulletoutlet.nl; for the Nordics please contact info@nutribullet.nu.
If any of the instructions or warnings are not understood please contact Customer Service for assistance at customerservice@nutribulletretail.com.

Save these instructions!

What’s included

250 WATT MOTOR BASE

|

800 mL WORK BOWL

|

CHOPPING BLADE

|

BOWL LID WITH FEED CHUTE

---|---|---|---

FOOD PUSHER

REVERSIBLE SLICE/ SHRED DISC

|

STAINLESS STEEL CROSS BLADE

|

2 (450 mL) TALL CUPS

|

TO-GO LID

**Assembly guide

**

Using the food processor: chopping blade

Place Work Bowl on a clean, dry, flat surface, like a counter top
Carefully place the Chopping Blade onto the bowl shaft.
Add your food ingredients to the bowl. Remember to keep your hand and fingers out of the bowl and away from the Chopping Blade
Place the Bowl Lid on top of the bowl and turn it clockwise to lock it into place. NEVER place hands, fingers, utensils, or any non-food items into the Feed Chute.
NOTE: The lid must be locked securely in place, or the motor will not run.
Place the Work Bowl on top of the motor base, and turn it clockwise to lock it in place.
NOTE: The bowl must be locked securely in place, or the motor will not .
.Turn the power control knob to ON or PULSE to activate the motor.
When you are finished, turn the knob to the OFF position.
Remove the bowl from the base by turning it counterclockwise. Place bowl on clean, dry, flat surface.
| WARNING: ALWAYS wait until the blade has stopped moving before removing the bow
---|---

Remove the lid by turning it counter-clockwise to unlock

Carefully remove the chopping blade and set it aside. Blade is sharp, handle with care.
Pour your food ingredients from the bowl.

| WARNING: Never unload or pour food from bowl without first removing the chopping blade.
---|---

Using the food processor: slice/shred disc

Place the work bowl on a clean, dry, flat surface, like a countertop
Carefully place the blade disc onto the bowl shaft, with the desired side facing UP

NOTE: Always use the two larger holes (finger holes) to handle the blade discs.
Place the bowl lid on top of the bowl and turn it clockwise to lock it into place. NEVER place hands, fingers, utensils, or any non-food items into the feed chute.
NOTE: The lid must be locked securely in place, or the motor will not run.
Place the bowl lid on top of the bowl and turn it clockwise to lock it into place. NEVER place hands, fingers, utensils, or any non-food items into the feed chute.
NOTE: The lid must be locked securely in place, or the motor will not run.
If needed, cut your food so it will fit in the feed chute. Then place food into the chute.
Turn the power control knob to the ON position.
Always use the food pusher to guide food through the feed chute. NEVER place hands, fingers, utensils, or any nonfood items into the feed chute.
When you are finished, turn the knob to the OFF position.
Remove the bowl from the base by turning it counterclockwise. Place bowl on clean, dry, flat surface.

| WARNING : ALWAYS wait until the blade has stopped moving before removing the lid.
---|---
10. Remove the lid by turning it counter-clockwise to unlock.

Using finger holes, carefully remove the disc blade and set it aside. Blade is sharp, handle with care.

NOTE: Always use the two larger holes (finger holes) to handle the blade discs.
Pour your food ingredients from the bowl.
| WARNING: Never unload or pour food from bowl without first removing the blade disc
---|---

Using the blender: cup and cross blade

Place the motor base on a clean, dry, flat surface, like a counter top
Add ingredients into the Magic Bullet cup (making sure you do NOT exceed the MAX line).
Twist on the cross blade assembly until the cup and the blade assembly are sealed tight.
Turn the sealed cup upside down and place onto the motor base, turning it clockwise to lock the cup onto base.

NOTE: The cup must be locked securely in place, or the motor will not run.
Turn the power control knob to ON or PULSE to activate the motor.
| WARNING : Never blend hot or carbonated ingredients, which can pressurize the sealed cup. Always use cool or room temperature ingredients. Never operate for more than one minute. The friction from the rotating blade can heat and pressurize the vessel, causing possible separation and personal injury
---|---
When you are finished, turn the knob to the OFF position.
Remove the sealed cup from the motor base by turning it counter-clockwise to unlock.
| WARNING : ALWAYS wait until the blades have stopped moving before removing the cup from the base.
---|---
Turn the sealed cup right side up (blade assembly on top), and twist off the blade assembly. Pour and enjoy!

Power settings

OFF:
Power is OFF, the unit is not running.

ON:
Continuous blending or food processing action. The unit stays ON until you switch to OFF.

WARNING : Never leave the blender on for more than one minute!

PULSE:
Provides quick bursts of pulsing action for more control over the texture of your food or drink. You must hold the knob on PULSE to keep the unit on, otherwise the knob will automatically move to OFF.

Care & maintenance

Cleaning the Magic Bullet Kitchen Express™ is easy. All components, except for the motor base, are dishwasher-safe.

STEP 1 : The most important thing — ALWAYS POWER OFF THE UNIT and UNPLUG the motor base from the power outlet when it is not in use. Do not attempt to handle the appliance until all parts have stopped moving!
STEP 2: To start the cleaning process, empty the bowl, making sure little to no food scraps remain. Disassemble all parts. Make sure the blending cup/ cross blade and work bowl are not attached to the motor base.
STEP 3: Simply place any of the parts (except for the motor base) on the top rack of the dishwasher or hand wash with warm, soapy water and rinse.
NEVER use the sanitize cycle as this may warp the cups or work bowl.

| WARNING: Always be extremely careful when handling blades, as they are very sharp.
---|---
| WARNING: To pick up and handle the blade discs, always use the two larger finger holes in each disc.

MOTOR BASE

To avoid risk of injury, NEVER attempt to clean the actuator system on the motor base while the Magic Bullet Kitchen Express™ is plugged in.
Do not attempt to remove any pieces from the motor base.
Use a sponge or damp cloth to wipe down the motor base until clean.

If necessary, you may use a small brush to scrub the actuator system area to ensure it is clean (dried food particles can prevent the tabs from working properly).

| WARNING: Never submerge the motor base in water or any other liquid.
---|---

IMPORTANT
Signals that it’s about time to buy a new blade: in case of a bad smell, louder noise during blending, burning air (may also be novelty after purchase),or if the machine does not start (which can also be caused by sticking of the actuator system on the motor base.

Replacement parts

To order additional parts and accessories, please
visit our website at nutriliving.shop.
For Nordic countries: www.nutribullet.nu.

How to store

When not in use, store all pieces of the unit together in a safe place where they will not be damaged and won’t cause harm.

Warranty registration

Please visit nutriliving.shop to register your new Magic Bullet Kitchen Express™.
You will be asked to enter the **Serial Number* of your product, along with the purchase date and name of the shop of purchase.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering your product you acknowledge to have read and understood the instructions for safety and use, and the warnings set forth in the accompanying instructions.
To find the serial number, check under the Motor Base.
If you cannot find the serial number, please send an email to info@nutribulletretail.com** for assistance.

Are you happy with your Magic Bullet?

Share your recipes, posts, tips & tricks! Like & follow us @nutribullet.nordics

Tag your blends #nutribullet #nutribullet.nordics #nutrilovers #healthy

healthylifestyle

REFER A FRIEND GIVE 10% GET 10%

Spread the news how much fun & benefit your Magic Bullet Kitchen Express™ is giving you! Surprise a friend by giving him/her a 10% discount to buy a NutriBullet product of their choice! Code: 4MYFRIEND10

To thank for sharing we offer you a 10% discount on your next purchase! Code: THANKU10

Unsure of where to start?
The recipe guide outlines everything you need to know.
Visitwww.nutriliving.shop and download your copy.

Illustrations may differ from the actual product.
We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.