Amazon B08D6WJYD9 Alexa Voice Remote 3Gen User Manual
- June 7, 2024
- Amazon
Table of Contents
Amazon B08D6WJYD9 Alexa Voice Remote 3Gen
Get to know your Alexa Voice Remote
- Power
- Voice button
- Select
- Back
- Rewind
- Mute
- Volume
- Indicator LED
- Microphone
- Navigation
- Home
- Menu
- Fast forward
- Play/pause
- Guide
- App buttons
Set up your Alexa Voice Remote
Insert Included AAA batteries
Remove the battery door and insert the batteries into your Alexa Voice Remote.
Pair the remote with your Fire TV device
You must pair your new remote to your Fire TV device. Choose the option below that fits your situation.
If this Is a replacement remote and you don’t have the original remote that came with your Fire TV dl9Ylce:
- l. Restart your Fire TV device by unplugging the power cable, then plugging It back In. Once the Home screen for Fire TV appears, your remote should be ready for use. If not, move to Step 2 .
- Press and hold the Home button on the new remote for at least 10 seconds. The LED on the remote will slowly flash amber. Continue holding down the Home button until the LED starts to rapidly flash. A notification will appear on your screen indicating that your remote is successfully paired.
If you do have the remote that came with your Fire TV dl9Ylce, you’ll need both remotes for setup:
-
On your new remote, press and hold the Home button for 10 seconds. The indicator LED will slowly flash amber for 10 seconds, then flash faster when your remote is ready to connect.
Use your original remote for the following steps: -
Press the Home @ button, navigate to Settings at the top of the screen, then select Remotes & Bluetooth Devices> Amazon Fire TV Remotes> Add New Remote.
-
Your Fire TV device will search for remotes It can connect with, then display them in a list.
-
Using your original remote, select the new remote from the list. You’ll see an on-screen message when It has been successfully paired. You can now use your new Alexa Voice Remote.
Troubleshooting tips
- If the new remote does not connect, remove and reinsert its batteries.
- If your remote isn’t discovered, press and hold the Home button for at least 10 seconds until the LED rapidly flashes amber.
- Always replace dead batteries with new 1.5 V alkaline or 1.2 V NiMH rechargeable batteries.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>