Steelseries B079YBKT3H Arctis Pro Wireless Gaming Headset User Guide

: June 7, 2024
: SteelSeries

Table of Contents

WELCOME TO ARCTIS PRO WIRELESS
STEELSERIES ENGINE SOFTWARE REQUIREMENTS
PRODUCT OVERVIEW
POWER ON/OFF
- POWER ON
- PAIRING
BLUETOOTH
- POWER ON
- PAIRING
- CONTROL
SETUP PS4 PRO AND ORIGINAL
SETUP PS4 SLIM WITH OPTICAL AUDIO
SETUP PS4 SLIM WITHOUT OPTICAL AUDIO
SETUP PC/MAC
SKI GOGGLE HEADBAND
BATTERY
- BATTERY SWAPPING
- MOBILE CHARGING
SPEAKER PLATE
REGULATORY
Documents / Resources

Steelseries B079YBKT3H Arctis Pro Wireless Gaming Headset

WELCOME TO ARCTIS PRO WIRELESS

History showed us that gaming headsets rarely looked good and sounded worse, so we made Arctis and put all other headsets on notice. Next, the audiophiles said that a gaming headset could never stand up to dedicated headphones, so we made Arctis Pro and changed the game

Like you, we are esports pros, pubstars, 5am raiders, 1hp heroes, streamers and dreamers. Your Arctis Pro was forged out of our belief that gaming isn’t your way to escape reality, it’s your path to rewrite it.

STEELSERIES ENGINE

Download SteelSeries Engine to control the Wireless Transmitter from PC, and to integrate with Engine Apps (like displaying Discord info on the OLED screen). steelseries.com/engine

SOFTWARE REQUIREMENTS

Platforms
Windows 7 +
Mac OS X 10.8 +
120 MB of free hard drive space for installation
***** DTS Headphone: X 7.1 Surround available on Windows only. Software installation required.

PACKAGE CONTENTS

Headset
Wireless Transmitter
Additional Battery
USB Audio Cable
Optical Audio Cable
Power Cable
Mobile Audio Cable
Mobile Charging Cable

find help at support.steelseries.com

SYSTEM REQUIREMENTS // COMPATIBILITY

PC
PS4 (Pro / Original / Slim)

STEELSERIES ENGINE SOFTWARE REQUIREMENTS

Platforms
Windows 7 +
Mac OS X 10.8 +
120 MB of free hard drive space for installation

PRODUCT OVERVIEW

01 Ski goggle headband
02 Airweave ear cushions
03 ClearCast microphone

04 Microphone mute button
05 Control Wheel
06 Micro-USB jack (for charging and firmware updates)
07 Headphone share jack
08 Mobile audio cable jack
09 Power button
10 Bluetooth button

11 Mobile charging cable
12 Power Cable
13 USB Audio Cable
14 Optical Audio Cable
15 Mobile audio cable *

16 OLED screen
17 Secondary button
18 Control knob
19 Battery charging slot
20 Line In jack
21 Line Out jack
22 DC jack
23 Mini USB jack
24 Optical in
25 Optical out

Find accessories and replacement parts at steelseries.com/gaming-accessories

POWER ON/OFF

POWER ON

Power the headset on or off press and hold the power button for 2 seconds.

PAIRING

The headset is already paired to the transmitter when it arrives. In the event you need to re-pair, go into the pairing menu and follow the on-screen instructions

Option > System > Pairing

BLUETOOTH

POWER ON

To turn Bluetooth off, press and hold the Bluetooth button

PAIRING

With Bluetooth off, press and hold Bluetooth button for 6 seconds.

CONTROL

ANSWER/END VOICE CALL
single · press the Bluetooth button

PLAY/PAUSE MUSIC
single · press the Bluetooth button

SKIP TRACK
double · · press Bluetooth button

SETUP PS4 PRO AND ORIGINAL

HARDWARE INSTALLATION

01 Connect the USB audio cable from the Wireless Transmitter to the front of the PS4
02 Connect the Optical Audio Cable from the Wireless Transmitter to the back of the PS4

WIRELESS TRANSMITTER SETTINGS

Main Menu > Source > PS4

PS4 AUDIO SETTINGS

PS4 SETTING > SOUND AND SCREEN > AUDIO OUTPUT SETTING

Primary Output Port| Digital Out (Optical)
Audio Format (Priority)| Bitstream (Dolby)
DEVICES > AUDIO DEVICES
Output to Headphones| Chat Audio

SETUP PS4 SLIM WITH OPTICAL AUDIO

HARDWARE INSTALLATION

01 Connect the optical cable from the Wireless Transmitter to the optical output of your TV or HDMI adapter
02 Connect the USB audio cable from the Wireless Transmitter to the USB port on the front of the PS4

***** The PS4 Slim does not have an optical output. For full functionality you will need to connect the Wireless Transmitter to the optical output of a TV or an HDMI adapter. If no optical is available proceed to the next page.

WIRELESS TRANSMITTER SETTINGS

Main Menu > Source > PS4

PS4 AUDIO SETTINGS

PS4 SETTING > SOUND AND SCREEN > AUDIO OUTPUT SETTING

Primary Output Port| Digital Out (Optical)
Audio Format (Priority)| Bitstream (Dolby)
DEVICES > AUDIO DEVICES
Output to Headphones| Chat Audio

SETUP PS4 SLIM WITHOUT OPTICAL AUDIO

HARDWARE INSTALLATION

01 Connect the USB audio cable from the Wireless Transmitter to the USB port on the front of the PS4

* Without optical audio, surround sound and ChatMix features will be unavailable.

WIRELESS TRANSMITTER SETTINGS

Main Menu > Source > PS4

PS4 AUDIO SETTINGS

DEVICES > AUDIO DEVICES

Output to Headphones	All Audio

SETUP PC/MAC

HARDWARE INSTALLATION

01 Connect the USB audio cable from the Wireless Transmitter to the PC
02 (optional) Connect a 3.5mm cable from the Wireless Transmitter’s Line Out jack to a pair of speakers for automatic switching when headset power is toggled

SETTINGS

Main Menu > Source > PC

WINDOWS SOUND SETTINGS

01 Under “Playback” highlight Arctis Pro Game Audio and select “Set Default”
02 Select Arctis Pro Chat Audio and select “Set Default Communications Device”
03 Under “Recording” highlight Arctis Pro Chat Audio and select “Set Default”

MAC SOUND SETTINGS

01 Go to System Preferences > Sound
02 Under Output’ select Arctis Pro Game Audio **03** UnderInput’ select Arctis Pro Microphone
04 In your VoIP (chat) application select Arctis Pro Chat Audio as the default audio device

SKI GOGGLE HEADBAND

BATTERY

BATTERY SWAPPING

To charge additional battery, place the battery inside the charging slot on the transmitter

MOBILE CHARGING

To charge headset while using or on the go, connect the Mobile Charging Cable from the micro-USB port on the headset to any USB power source

SPEAKER PLATE

TRANSIMITTER OPERATION

HOME SCREEN

Rotate the control knob to adjust volume
Press and release the control knob to enter the menu (to adjust EQ, set ChatMix, and customize settings)
Press and hold the secondary button to toggle surround

Rotate the control knob to scroll through the menu
Press and release the control knob to select menu items
Press and release the secondary button to go back one step

REGULATORY

Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Operations in the 5GHz products are restricted to indoor usage only.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.

Industry Canada Statement:

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Europe – EU Declaration of Conformity

Hereby, SteelSeries ApS. declares that the equipment which is compliance with directive RoHS 2.0 (2015/863/EU), R.E.D (2014/53/EU), EMC Directive (2014/30/EU), and LVD (2014/35/EU) which are issued by the Commission of the European Community.
The full text of the EU declaration of conformity is available at the following internet address: https://steelseries.com/

SteelSeries ApS. hereby confirms, to date, based on the feedback from our suppliers indicates that our products shipping to the EU territory comply with REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals – (EC) 1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products.

WEEE

This product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.

Safety Guideline for Lithium Battery

Please keep follow all listed important warnings and cautions below while using this battery pack to avoid any damage or hazard.

This product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.

“CAUTION!” Risk of explosion if battery pack is not replace by same type as specified by the manufacturer.

The battery polarity (+) and (-) shall not be connected and charged reversely. Risk of explosion if the battery polarity (+) and (-) is reversed.
Please keep this battery pack away from fire and high heat sources due to explosion might happen. Do not place your battery pack close to any heater or hot location.
This battery pack shall not be hit or impacted. This battery pack shall not be dealt with any sharp or keen objects either.
This battery pack shall not be exposed to moisture, dripping or splashing.
If any electrolyte flow out of this battery pack when touch the user’s eyes and skin, please seek medical advice immediately

Custom Union Compliance.
(Russia / Belarus / Kazakhstan)

Direct Current

ACMA Compliance (Australia/ New-Zealand)

More information and support from https://steelseries.com/

Documents / Resources

| Steelseries B079YBKT3H Arctis Pro Wireless Gaming Headset [pdf] User Guide
B079YBKT3H, Arctis Pro, Wireless Gaming Headset, B079YBKT3H Arctis Pro Wireless Gaming Headset, B079YBKT3H Arctis Pro, Arctis Pro Wireless Gaming Headset
---|---