QUIXX SYSTEM Headlight Restoration Kit User Manual

QUIXX SYSTEM Headlight Restoration Kit

DIRECTIONS

Makes dull headlights clear and transparent

ATTENTION:
Keep out of reach of children. Use only according to instructions! Do not use on any printed, varnished or coated surfaces! Only use on foggy and/or yellowed plastic headlight lenses. Do not use sandpaper if lenses are tinted or have a protective coating, as this coating may be removed where treated. Lenses with fine cracks or internal fogging will not be restored completely.

QUIXX HEADLIGHT LENS POLISH (PLASTIC POLISH FOR ACRYLIC GLASS)

Preparation

1. Wash headlights thoroughly to remove dirt.
2. Mask the complete area around the headlight lens with broad adhesive plastic tape to protect it from any treatment.

For matt patches and yellowing

1. Apply a little polishing paste onto the headlight lens and polish it with the polishing cloth. Apply more pressure and polish more quickly to speed up the polishing process.
2. If the lens is in extremely bad condition and did not come clean with just the polish, then proceed to step C.

For heavily marred lenses

1. Wrap the 2000-grit sandpaper around the rubber block. Dip both into water and wet-sand the headlight lens with horizontal movements and water until major imperfections are no longer visible. Remove the wet sanding residue with a cloth.
2. Wrap the 3000-grit sandpaper around the rubber block. Dip both into water and wet-sand the headlight lens with vertical movements and water until smaller imperfections are no longer visible. Remove the wet sanding residue with a cloth.
3. Wrap the 5000-grit sandpaper around the rubber block. Dip both into the water and wet-sand the headlight lens with horizontal movements and water until the sur-face is smooth and even. Remove the wet sanding residue with a cloth.
4. Apply QUIXX PLASTIC POLISH for Acrylic Glass onto the headlight lens and polish it to mirror finish by using the polishing cloth with vertical movements. Apply more pressure and polish more quickly to speed up the polishing process.

Protect

1. Remove any residue with a wet cloth.
2. Remove the masking tape surrounding the lens.
3. Seal the restored headlights with QUIXX Headlight Lens Sealer regularly to keep the lenses cleaner and clearer for longer.

QUIXX HEADLIGHT LENS SEALER

1. Clean the headlight lens thoroughly.
2. Apply a small amount of QUIXX HEADLIGHT SEALER to a polishing cloth and distribute evenly over the headlight.
3. Allow the sealer to dry to a haze (about 5-10 minutes).
4. Buff the lens to a high gloss with a clean cloth.
5. For maximum protection repeat the application every 3 months.

USING

Video Link

Support:
+49 151 422 48 446

Hersteller/Manufacturer:
E.V.I. GmbH | Hainbuchenring 4 | 82061 Neuried | Germany Phone: +49 89 745062-0 | www.quixx.com.

References

• QUIXX – Repair it. Yourself!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>