HIKVISION Vandal-Resistant Doorbell UD18946B User Guide
- June 7, 2024
- Hikvision
Table of Contents
DS-KB8113-IME1
Vandal-Resistant Doorbell
UD18946B
Diagram References
- Microphone
- Built-in Camera
- Low Illumination Supplement Light
- Call Button
- Loudspeaker
Note: The appearance of the device varies according to a different model. Refers to the actual device.
Terminal
-
12 VDC: 12 VDC Power Supply Input
A1 AI: Alarm Input -
LAN: Network Interface (PoE Supported)
A2 GND: Grounding
B1 COM: Common Interface
B2 NO: Door Lock Relay Output (Connect Electric Strike)
B3 NC: Door Lock Relay Output (Connect Electric Bolt or Magnetic Lock)
Note: Wiring description refers to the User Manual.
Installation
Before you begin:
- Make sure the device in the package is in good condition and all the assembly parts are included.
- The device supports two ways of power supply: 12 VDC, or PoE power supply. Please make sure your power supply matches your doorbell.
- Make sure all the related equipment is power-off during the installation.
- Make sure the wall is strong enough to withstand 4 times the weight of the doorbell. Check the product specification for the installation environment.
Mounting Accessories
To install the doorbell onto the wall, you are required to use a matched
mounting plate.
Wall Mounting
-
Fix the wall mounting plate to the wall with 4 expansion screws.
-
Insert terminal blocks into interfaces of the doorbell body, and connect the network cable.
-
Fix the doorbell body to the protective shield tightly.
-
Hook the doorbell to the wall mounting plate tightly.
-
Use the set screw to secure the doorbell with the mounting plate.
Configuration
Set Up Mobile Client
Before you begin:
Make sure your mobile device has been connected to Wi-Fi.
- Install the Hik-Connect client and register a user account for iOS and Android.
- Search Hik-Connect in App Store or Hikvision website to download and install the client.
- Launch the App and follow the on-screen instructions to register a user account.
- Start the client, and log in to the client.
Set Up Doorbell via Client
To operate the doorbell normally, you should add the doorbell to the client
-
On the home page of the client, tap Add Device. – Scan QR Code of the doorbell to add.
Note: The QR Code is printed on the label, which is on the rear panel of the doorbell. If you have already installed the device, you can scan the QR code in the user manual.
– Tap the Image icon to select a QR code picture to add.
– Tap the Edit icon to enter Serial No. of the doorbell to add. -
Tap Next. Connect the device to a router with a network cable, and tap Connected.
Note: Make sure your mobile device is connected to the same router. -
The account is connected to the device.
Set Up Doorbell via Indoor Station
-
Choose Language and tap Next.
-
Set network parameters and tap Next – Edit Local IP, Subnet Mask, and Gateway parameters.
– Enable DHCP, the device will get network parameters automatically. -
Configure the indoor station and tap Next.
a. Select Indoor Station Type. b. Edit Floor and Room No. -
Linked related devices and tap Next. If the device and the indoor station are in the same LAN, the device will be displayed in the list. Tap the device or enter the serial No. to link.
a. Tap the doorbell in the list to link.
b. Tap the settings icon to pop up the Network Settings page.
c. Edit the network parameters of the doorbell manually or enable DHCP to get the network parameters automatically.
d. Optional: Enable Synchronize Language to synchronize the Language of the doorbell with the indoor station.
e. Tap OK to save the settings. -
Tap Finish to save the settings.
Remote Operation
a Live View via Mobile Client
Tap the doorbell in the list to open the floating windows. And then tap the
floating window to enter the Live View page.
Tap the video on the screen, you can tap to capture the screen.
Tap to record.
b Two-Way Audio
-
Call from client software: On the Live View page, tap to create a call between the client and the device.
-
Receive call from the device:
You can receive or decline the call from the device.
– Tap to receive the call.
– Tap to decline the call.
– Tap to unlock the door remotely.
– Tap to adjust the volume.
– When you communicate with the device, you can tap to mute. -
Call indoor station: Press the call button to create a call between the indoor station and the doorbell.
Unlock Remotely via Mobile Client
On the main page or on the live view page, tap to unlock the door.
*Refer to Video Intercom Vandal-Resistant Doorbell User Manual (scan the QR
code) for details.
http://enpinfodata.hikvision.com/analysisQR/showQR/c819622a
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures,
charts, images, and all other information hereinafter are for description and
explanation only.
The information contained in the Manual is subject to change, without notice,
due to firmware updates or other reasons. Please find the latest version of this
Manual at the Hikvision website (https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals
trained in supporting the Product.
and other Hikvision trademarks and logos are the properties of Hikvision in
various jurisdictions. Other trademarks and logos mentioned are the properties
of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,
OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR
OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITY FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU
ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE
LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT
DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT
LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY
PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF
MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL
WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR
UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATTER PREVAILS.
This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment or dispose of it at designated collection points. For
more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info
BATTERY CAUTION
replacement of a battery with an incorrect type that can defeat a safeguard
(for example, in the case of some lithium battery types);
– disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion;
– leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or the leakage of flammable liquid or gas; and
– a battery subjected to the extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas
Chemical burning danger
Do not swallow the battery.
Keep new and used batteries away from the children.
If you think batteries might have been swallowed or placed inside any part of
the body, seek immediate medical attention.
Risk of explosion if the battery is replaced by an incorrect type.
Replacement of a battery with an incorrect type can defeat a safeguard.
Dispose of used batteries according to the instructions and local regulations.
If the battery compartment does not close securely, stop using the product and
keep it away from children.
INSTALLATION CAUTION
The additional force shall be equal to three times the weight of the equipment
but not less than 50N. The equipment and its associated mounting means shall
remain secure during the installation. After the installation, the equipment,
including any associated mounting plate, shall not be damaged.
Hangzhou Hikvision Digital Technology CO., Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Legal and Regulatory Information
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>