INSIGNIA NS-HZ330 RCA to HDMI Converter User Guide
- June 7, 2024
- Insignia
Table of Contents
INSIGNIA NS-HZ330 RCA to HDMI Converter
PACKAGE CONTENTS
- Analog to HDMI Converter
- Power Adapter
- Quick Setup Guide
Note : RCA and HDMI cable not included and required for use.
Before using your new product, please read these instructions to prevent any damage.
FEATURES
- Allows easy connection of devices with AV components to any TV or display with an HDMI input.
- HDMI output with selectable 720p/1080p output works with most TVs and displays with an HDMI input.
- Power adapter for constant use in any system.
- Supports NTSC/PAL TV formats.
Top view
SETTING UP YOUR CONVERTER
Note : Before you install this device, turn off the audio/video device that you are connecting.
- Connect an AV cable (yellow, red, and white, not included) to the input port on the converter, then connect it to the AV Out port on your audio/video device.
- Using an HDMI cable (not included), connect the converter’s HDMI output to a display device such as TV / LCD / Monitor that has HDMI input.
- Connect the AC power adapter to the DC jack on the converter, then plug the power adapter into a wall outlet.
- Turn on the connected devices and begin playback. If you are not getting audio or video, check the connections and settings to make sure that they are all correct.
- Select either 720p or 1080p output via the switch on the converter. If you are not sure, select 720p for maximum compatibility.
IMPORTANT SAFETY INFORMATION
- Indoor use only.
- There are no user serviceable parts. Do not open the housing.
- Do not use in a high humidity environment.
- Use included power adapter only.
SPECIFICATIONS
Dimensions (H×W×D): 1.25 × 2.85 × 3.2 in.
HDMI Version: (3.18 × 7.23 × 8.3 cm)
Input Format: V1.3 NTSC or PAL (480i or
576i)
IHDMI Output Connector: Type A 19 pin Female × 1
HDMI Video Output resolution: 720p@50/60Hz
Power Supply: 1080p@50/60Hz
Power Consumption: 5V 1A (USB Type-A Female Output)
Wa3.8 (max.)tts
Accessories: USB-A male to 2.1 × 5.5 mm
DC plug 5.9 ft (1.8 m) length power cable
TROUBLESHOOTING
If you have problems with your converter, try these suggestions before calling Customer Service.
PROBLEM | POSSIBLE SOLUTIONS |
---|---|
The power indicator is off | If the power on indicator is not on, |
make sure that the wall outlet that the power adapter is plugged into is a
live outlet and that it is turned on (if it is switched).
No video and no audio| Check the connections and make sure that they are
correct and secure.
Try the other position on the 720p/1080p switch on the converter box.
Has video, but no audio| Make sure that your TV or monitor is on the AV input.
Make sure that the volume is turned up on your playback device.
Image quality is poor| Because of the limitations of the legacy analog composite video output, the image quality will not be as good as a digital or HD source. There will be softness to the image and the colors will not be as vivid. This is normal operation and not a limitation of the converter box.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, maybe cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ICES statement: CAN ICES-3 B/NMB-3 B
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call
1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2020 Best Buy. All rights reserved.