amazon Electronic Keypad Deadbolt Lock Y001 User Manual
- June 6, 2024
- Amazon
Table of Contents
Electronic Keypad Deadbolt Lock Y001
Smart Lock Manual
Electronic Keypad Deadbolt Lock
PREFACE
Please read this manual before installing. Any question, please contact our
customer service. WARNING This Manufacturer advises that no lock can provide
complete security by itself. This lock may be defeated by forcible or
technical means, or evaded by entry elsewhere on the property. No lock can
substitute for caution, awareness of your environment, and common sense. In
order to enhance security and reduce risk, you should consult a qualified
locksmith or other security professional.
Customer Service Support: E-MAIL: smonetus@hotmail.com Toll Free: +1 (888) 988
6072 (Available after 6:00 PM at Pacific time if need)
DIRECTORY
INTRODUCTION
01
Product Specifications
01
Package
02
Performance
03
INSTALLATION MANUAL
04
Tools Needed
04
Installation Step
04
SMART INSTRUCTION
12
Pairing Lock to Phone App
12
TT LOCK App Operating
13
MATCH the Wi-Fi GATEWAY to the APPLICATION
18
MATCH the TTLOCK APP to the ALEXA APP
19
MATCH the SMART WATCH to the SMART LOCK
21
OPERATION INSTRUCTIONS
22
Setting Admin Passcode
22
Lock/Unlock
23
Dead Lock
23
Reset
24
Battery Power Runs Out
24
INTRODUCTION
Product Specifications
Item No. Material Weight Communication mode Unlocking way Support System Unlock time Power supply Static current Working current
Y001 Zinc Alloy 2.46 lb Bluetooth 4.0ble Bluetooth, Code, Mechanical key Android 4.3 / IOS 7.0 above 1.5 sec 4pcs AA batteries 30uA 200mA
< 01 >
Package
K I
Q
A
Part A B C D E F G H I J K L M N O P Q R
C
D
J
F
B
E
G
Description Key
Keyhole Cover Keypad
Double-screw Bolt Latch
Wood Screws Strike Plate
Box Striking Plate Inside Mounting Plate
Flat Screw Receiver Module Short Flat Screw Longest Flat Screw
Battery Cover Size Reference Card
Drill Bit Needle IC Card
< 02 >
L
N
M R
H
Quantity 2 1 1 2 1 4 1 1 1 4 1 3 1 2 2 1 1 2
Performance
1.Smarter and Safer Smart Lock Front Door set out to provide extra home
security with keyless codes, Bluetooth unlock, anti-peep password and auto
lock (5-200s) to keep your house safe and sound.
2.Real Time Record Through Keyless Door Locks for Homes APP, you could check
the unlocking records and incorrect password records from the Admin account in
real time. And you’ll have comfort in knowing your door’s status.
3.Fast Sharing and Convenient With Smart Digital Door Locks for Homes, You can
share code with friends and guests valid for a few weeks,hours, or minutes,
and revoke them whenever you need to. Never worry about lost, stolen or copied
keys again.
4.Easily Install and Smart Reminder Just a screwdriver and a easy-to-follow
instruction to easily install Door Locks with Keypads. And when in low
battery, Keypad Door Lock Deadbolt Set will alarm and could be temporary
charged by a 9V battery.
< 03 >
INSTALLATION MANUAL
Note: Install and test lock with door open to avoid being locked out
Tools Needed
Phillips Screwdriver Tape Measure Pencil Other Chiseling Tools
Installation Step
1.Adjusting Latch Length
Note: When performing this operation, please take protective measures and be
careful of the metal edge not to injure yourself.
< 04 >
Hold the right part of the lock tongue with your right hand and turn the left
iron piece counter clockwise (about 15 degrees) with your left hand. When the
rectangular position of the 2-3/8″(60mm) tick mark changes from convex to
concave (as shown), slowly extend the locking latch, and then turn clockwise
the inside of the locking latch back to the rectangular position of
2-3/4″(70mm)scale.
2.Check Door Dimensions
center to center minimum
³/8″
2/8″
2¹/8″
4″
In order to fasten door lock, you need to drill an extra hole.
- Backset Determination Backset is a distance from door edge to center of hole on door face.
- Hole’s Diameters Using the marks as guide to drill holes 3/8”(10mm)—-Fasten Smart door lock 2-1/8”(54mm)
- Door Thickness The door thickness within 1-1/2” to 1-7/8” (38mm-48mm) are
all suitable for the keypad deadbolt handle set.
< 05 >
3.Install Lock 1)Install Latch Note:Need to keep this way up when inserting
the latch.
Insert the latch and ensure it is parallel to the door face.
A.Mark the outline of the faceplate ,then take out the latch. B.Chisel 1mm-2mm
deep along the outline to allow the faceplate to be aligned with the door
edge. C.Insert the latch into the door ,use 2 wood screws to secure latch.
2)Install Plate
A.Identify the center of plate: Close the door to lay the latch bolt against
the door frame. Mark the the outline of the plate onto door jamb. B.Drill 25mm
deep at intersection of horizontal and vertical line of plate.
< 06 >
Chisel 1mm-2mm deep along the plate outline to allow the plate to be aligned
with the door frame. C.Insert the plastic lock groove and the strike plate
into door jamb tighten with wood screws. 3)Install Keypad
Install double-screw bolt into keypad inner plate.
Place IC wire, latch link bar and double-screws through the holes on the
deadbolt, as the picture on the right shows. Note: IC wire should be placed
under latch. After installing the front pad, roll the handle spindle to test
if it could work with deadbolt or not. If could not, take out the front pad
and roll the latch link bar around 90 degree and try to install again untill
it could work with the deadbolt.
Pass the IC wire and the latch link bar to mounting plate. Use 1 flat screw to
secure with the keypad double-screw bolt. Use 2 flat screw connect mounting
plate with latch. Note: Please place the IC line as shown in the figure to
avoid the lock latch out of control.
< 07 >
4)Identify Door Handing
The door is “Left-handle” if the hinges are on the left side of the door.
Whereas the door is “Right-handle” if the hinges are one the right side of the door.
Hinge
Hinge
Left-handle
5)Adjust Thumb Turn Piece
Rotate the thumb turn piece to “Horizontal Direction” for Left-handleopen into
room door when in unlock status.
Right-handle
Rotate the thumb turn piece to “Vertical Direction” for Right-handleopen into
room door when in unlock status.
Left-handle
Right-handle < 08 >
6)Adjust the Toggle Button of the Cover
L R
L R
To install the lock for left side handling, ensure the toggle button on the back cover assembly is set to “L”.
To install the lock for right side handling, ensure the toggle button on the back cover assembly is set to “R”.
7)Install Receiver Module Remove the battery cover (Press the spring button with the sharp object and push the cover up first then push it up)
Needle
3
Battery Cover
< 09 >
Connect IC wire to the white port carefully. Note:Ensure the thumb turn piece
and the toggle button of the cover in right way.
L R
Use 2 short flat screw tighten the receiver module inner battery groove.
Longest flat screw connect the receiver module with door.
8)Insert Battery and Install Back Battery Cover
Insert 4pcAA1.5V Alkaline batteries and slide the battery cover back onto the
receiver module.
< 10 >
Remarks: 1Alkaline batteries are recommend in order to stabilize the power
supply,if you don’t use alkaline, battery performance will be reduced greatly.
2All settings will be retain in the memory even if the batteries are complete
dead . A micro USB can directly power the lock and activate the keyboard.
Charging it via the ports under the lock.
< 11 >
SMART INSTRUCTION
Pairing Lock to Phone App 1.Download the App “TTLock”
Android Mobile Phone–Search “TTLock” from Google Play. Apple Mobile
Phone–please search “TTLock” from App Store.
2.Register and Login the Account
3.Match the Lock to the Application
When matching, follow the prompt steps of the program, you need to touch the
screen after installing the lock and installing the battery, match the blue
icon lock , and set the name for the lock. Note: If the smart lock is in a
non-addable state, Take out batteries to power off the lock about 5 seconds.
Then, power on and long press manual button about 10 seconds. Once hearing
beep beep sound, the lock is reset successfully.
< 12 >
TT LOCK App Operating 1.Account Information Change
When logging in “TTLock” Appyou need set up an account contain account
password. Each account can be added with multiple smart device locks for
management. Once the smart lock is added, it will become the admin account for
the lock.
< 13 >
2.Lock/Unlock
Press for unlock, long press for lock.It requires your smart phone and
Bluetooth lock to be within a certain range. Note: If you want remote
control,you need to connect to the Gateway.
3.Send ekey
You can add another account on the app. This way your family can also control
the Bluetooth lock via the app. Support authorized users to Limit time,
Permanent, One-time, Recurring control smart lock.
4.Generate Passcode
Generate or customize the passcode of the Bluetooth lock. Generate or
customize permanent, one-time, time-limited, recurring passcode. Note:
Generate the passcode to clear the passcode that Bluetooth lock stored by
“Erase”. Once used, in addition to the admin passcode, other passcode will be
cleared.
< 14 >
5.ekeys
Manage the authorized accounts in “Send eKey”. Admin can clear eKey, reset
eKey, send eKey etc.
6.Passcodes
It records all passwords stored by the Bluetooth lock you had set. In
addition, it can also reset, generate, upload passwords.
7.IC Cards
You can match two types of IC card: Permanent or Timed. Place the card against
the card reader sensor on the smart Lock(keypad panel).
< 15 >
8.Fingerprints
You will be required to Place and Remove your finger to the sensor several
times please follow the prompts.
9.Records
It records the time and manner of the smart lock when someone opening or
closing. Manage your Bluetooth lock safely and efficiently.
10.Settings
It have the function about the Bluetooth lock function setting, lock
information setting, remote unlocking, auto-off time, lock sound, time
proofread, record reading, etc.
< 16 >
You can find the information about the lock such as battery power admin
passcode. Note:The admin passcode will not be cleared when erase passcode.
If you forget to lock your door often, you could to set “Auto Lock”. Set the
time for automatic locking in your needs, so you don’t have to worry about
security accidents due to being unlock.
11.Remote Control
Remote control support needs an extra additional Wi-Fi Gateway. Match the
gateway, smart phone, app then the smart lock can support remote control lock.
< 17 >
MATCH the Wi-Fi GATEWAY to the APPLICATION
Remote Control and Aleax would support after matching the Wi-Fi Gateway. Click
the button in the upper left corner of the page and enter relevant information
as prompted to add a gateway to your account. Note: When the smart phone app
matches the smart lock or the gateway, it is necessary to enable Bluetooth and
Wi-Fi.It can be successfully matched when your smart phone is close to the
lock and the Gateway.
< 18 >
MATCH the TTLOCK APP to the ALEXA APP
After setting up to the gateway, authorize the TTLock app in the Alexa app and
log in to the TTLock account to enable remote unlock and voice remote unlock.
Select “Skill & Games”, input “TTLock” in the search bar, click “ENABLE TO
USE”. And input TTLock account and password to finish the authorization. Note:
If shows “Invalid Account and Password”, please add “+1” at front of the
account.
< 19 >
Press locks option,choose the lock you paired. Click the icon in the upper
right corner and slide the icon button of “unlock by app” and “unlock by
vocie”.
< 20 >
MATCH the SMART WATCH to the SMART LOCK
Apple watch Android watch
Support Smart Watch (Apple watch or Android watch) lock/unlock. It is supported that smart watch match to smart phone. If the watch is connected to the phone, but it cannot search the “TTLock”App. Try to log in to the home page at your phone app, to refresh, and then check in the watch. If all settings are normal but can’t lock/unlock. Opening the “TTLock” App in your phone to check if the key is in a normal state. Note:All the operations, your watch and mobile phone require a certain range, the mobile phone network and Bluetooth need to remain in a normal state.
< 21 >
OPERATION INSTRUCTIONS
keep the door opened while programming to avoid being locking out
accidentally.
Touch screen button
Battery Cover
Metal Keyhole Cover A micro USB Backup Power Interface
Thumb Turn Piece
Dead lock /Reset button
Setting Admin Passcode
Via App: TTLock – Settings – Basics – Admin Passcode Via keypad (when not
added to the phone): Enter [*12#123456#Custom Admin passcode#Confirm Admin
passcode#] in keypad.
< 22 >
Lock/Unlock
Via Key: The package contains two keys that can be used directly through the
keyhole. Via Keypad: Enter the passcode then press “#”to unlock. Long press
“#” and hold 2s for lock. (No password required) Via APP: Touch to unlock,
long press to lock. It supports at a certain distance between smart phone and
lock Note: Remote control support need to matching with Wi-Fi Gateway.
Dead lock
Lock the door manually from the inside by hold the button for 2s, people won’t
be able to get in even they input the correct code from outside unless using
the admin passcode or APP. Turn the knob in back panel to release.
Thumb Turn Piece
Dead lock/Reset button
< 23 >
L R
Reset button
Reset
1.Take out one of the battery to power off the lock about 5 seconds. Then put
in the battery, power on the lock and long press the button about 10 seconds.
Once hearing “Please enter the initialization password”, please enter “000#”
to confirm. You will receive a voice prompt after reset successfully. 2.Long
press and hold the reset button in back panel for 10 seconds. Once hearing
“Please enter the initialization password”, please enter “000#” to confirm.
You will receive a voice prompt after reset successfully.
Battery Power Runs Out
The smart lock will sounds an alarm when the battery power is low. A micro USB
can directly power the lock and activate the keyboard. Charging it via the
ports under the lock.
USB
< 24 >
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>