RAND McNALLY RDY0528015966 RoadExplorer 7 Advanced Car GPS User Guide
- June 6, 2024
- Rand McNally
Table of Contents
- Important Information About Your Road Explorer 7
- Install the Mount
- Main Menu
- Set Routing and Device Options
- Destination
- Route to a New Location
- Confirm Destination Window
- Route Map Window
- Junction View
- Find a Point of Interest (POI)
- Virtual Dashboard
- More Information
- Rand McNally Dock
- Warnings, End-User License Agreement, and Warranty
- Support
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
RAND McNALLY RDY0528015966 RoadExplorer 7 Advanced Car GPS User Guide
Important Information About Your Road Explorer 7
RAND MCNALLY DOCK: Keep your device up to date by downloading the Rand McNally Dock for your home computer at www.randmcnally.com/dock and connecting your device with the USB cable provided.
POWER BUTTON: Press and hold the orange power button to turn the device on or off. The power button can also be used for quick access to certain features while the device is running. See Preferences > General > Quick Power Press for options. A red light indicates the battery is charging; a green light indicates the battery is fully charged.
RESET: Use the reset button on the back of the device to restart. This will cancel the current route, but preferences, address book, and other personal data will be saved.
LEARN MORE: Access Tutorial & Tips under Preferences > General on your device for more information, or visit www.randmcnally.com/support to download the user manual.
Important: Some screens include help tips. Tap this button to access.
WARNING: This product contains chemicals known to the State of California to cause cancer and/or other harm.
Install the Mount
NOTE: Follow all local regulations governing the placement of the mount. Select an area with a line of sight to the sky and GPS satellites to ensure reliable GPS information.
- Clean and dry the mounting area.
- Remove the suction cup protective fi lm.
- Adjust the angle of the mount.
- Pull the suction cup lever up to release suction.
- Plug the power cord into the device and the vehicle’s 12-volt power source.
- Slide the device onto the mount.
- Place and hold the mount suction cup against the mounting surface.
- Press the suction cup lever down until it snaps into place.
- Adjust the device so that it can be easily seen and does not block the driver’s line of sight.
Main Menu
- Enter trip information and access tools.
- Show location on the map and view navigation instructions.
- Choose a destination.
- Select device, route and map preferences. Access the tutorial.
- Mute/unmute the speaker.
- Adjust speaker volume.
- Indicates charge when running on battery.
Note: You can select different color schemes in Preferences > General > Skin Style. The following screen images appear in the “Ice” style. Some screens may appear different, based on model number.
Note: From other screens, tap the Main Menu icon in the bottom right corner to return to the Main Menu.
Set Routing and Device Options
On the left, tap on an option
On the right, enter settings for the option
- Tap Preferences.
- Tap the General, Route or Map tab.
- Tap and to view options.
- Tap the option button to be changed.
- Enter new settings.
- Tap to save changes.
Destination
- Route to a new location. (See page 6.)
- Return to a previously entered address.
- Access the Address Book.
- Plan a multi-stop trip.
- Route to a point of interest. (See page 10.)
- View trip content from Rand McNally
Route to a New Location
- Tap Choose Destination > New Location.
- Tap Address.
- Enter the name of the city. (NOTE: As you type, the keyboard displays only the next possible letter.)
- Prompts appear in the top bar. Tap the city to select. Or, tap List to view cities beginning with the letter(s) you entered.
- Enter the street name. (NOTE: If the letters you need do not appear, tap Expand Search.)
- Enter the house number. (NOTE: To enter the house number before the street, tap the house number button in the previous step.)
Tips
- You can also route to a new location by City Center, Intersection, or Latitude/Longitude, or choose Address > Zip Code Search
- View recent destinations by tapping Choose
- Destination > History. View recent cities by tapping Choose
- Destination > New Location > Address > History.
- View saved locations by tapping Choose Destination > Address Book
Confirm Destination Window
- Destination address.
- Begin route to destination.
- Compare a primary and alternate route and choose one.
- Add the location as a via point on the way to a previously entered destination.*
- Save the location to the Address Book. 6 Cross reference to printed Rand McNally Road Atlas.
- View the map. 8 Change the starting location for a route to the location displayed here.
- Return to Main Menu.
- Return to previous window.
- To manage via points, Tap Choose Destination > Multi-Stop Trips. You can add up to 50 destinations in a multi-stop trip, and optimize routing for trips of up to 10 stops.
NOTE: This window may include additional buttons based on the type of destination selected.
Route Map Window
- Repeat spoken next-maneuver instructions.
- Name of street you will turn onto next.
- Show arrival time, remaining time, or other options.
- Slide out to show upcoming exit information.
- Directions list slideout. Tap Route Display Options to select detail view, highway view, trip summary, or summary map view.
- Zoom in/zoom out.
- Return to Main Menu.
- Current direction. Tap to select a map display option (Heading Up, North Up, or 3D View).
- View current road name, upcoming cross road name, or city, county and state. Also displays current mile marker and advanced lane guidance. Tap to change.
- View and save current location, detour, or cancel a route.
- Tap on the current speed to display the Virtual Dashboard. (NOTE: Turns red for speed warnings; set in Trip Tools > Warnings.)
- Current speed limit. Tap to open a “Tell Rand” about speed limits.
- Minimize icons to show simply the map and next maneuver.
- View predictive traffic.
- Mute the speaker.
Junction View
When on a route, Junction View displays when you have an upcoming maneuver. Once past the maneuver, Junction View closes and the previous window displays.
- Signs to follow for the next maneuver.
- Number and direction of lanes for the next maneuver.
- Distance to the upcoming maneuver. Distance decreases as you approach the ramp.
- Lane assist arrow.
- Return to previous window.
Find a Point of Interest (POI)
Tap Choose Destination > Points of Interest.
Search for a POI:
-
Near your car
-
In a particular city
-
Along your route
-
Near your destination
-
View custom POIs that have been uploaded through the Rand McNally Dock
POI Categories: -
Roadside attractions, National Parks, and more
-
Restaurants, hotels, and other subcategories
Virtual Dashboard
- Sunrise and sunset times based on vehicle location (latitude/longitude) and day.
- Current speed.
- Elevation at current location.
- Percentage of current trip completed, distance to next maneuver, and the number of miles and time spent on the trip to this point.
- Match with the vehicle’s odometer to automatically update new fuel logs. Tap the pencil to edit.
- Gather trip information for up to three trips. Includes odometer settings, hours, and speeds.
- Reset trip information for the selected trip (Tab 1, Tab 2, or Tab 3).
- Select to automatically reset the information in each tab after the vehicle has remained stationary for the specifi ed number of hours.
- View fuel logs and add fuel purchase information.
- Return to the Route Map Window.
More Information
For a detailed description of the features of your device, please see the Road
Explorer™ 7 User Manual.
The User Manual can be downloaded from the Rand McNally Dock, and is also
available at
www.randmcnally.com/support.
Rand McNally Dock
The Rand McNally Dock enables you to receive software upgrades and access map updates, construction updates, and additional features. Simply download the Dock software for your PC or Mac at www.randmcnally.com/dock and connect your device using the USB cable provided.
With the Rand McNally Dock, you can also:
- Upload custom POIs, such as red light cameras, to your device
- Download the User Manual
- Access the Rand McNally support site and online store
- Read product news and announcements
- Send feedback and suggestions to Rand McNally through “Tell Rand”
Warnings, End-User License Agreement, and Warranty
Pay attention to road conditions and street signs, and obey all traffic and
safety laws. Traffic laws and current traffic conditions must always be
observed and take precedence over the instructions issued by the Rand McNally®
navigation system. The User should be aware of situations where current
traffic conditions and the instructions from the navigation system may be in
conflict.
Some states prohibit the use of windshield mounts and may otherwise restrict
the usage of navigation and other electronic devices in the vehicle. It is the
User’s responsibility to ensure compliance with all laws and regulations. The
use of the navigation system does not relieve the User of his/her
responsibilities. The User is ultimately responsible for the vehicle under
his/her control and should be aware of the surroundings at all times.
If after reading these statements the User decides not to accept these terms,
the User should not use this navigation system.
Rand McNally hereby grants you (“User”) a single-user non-exclusive, non-
transferable license to use the Rand McNally navigation system (hereinafter
referred to as the “Product” (including software and associated data) ) for
User’s own internal business or personal use and not for resale, sublicense or
commercial use.
This Product and the software incorporated in it and related documentation are
furnished under license and may be used only in accordance with this license.
Except as permitted by such license, the contents of this Product and software
may not be disclosed to third parties, copied or duplicated in any form, in
whole or in part, without the prior written permission of Rand McNally. This
Product and software contain proprietary and confidential information of Rand
McNally and its licensors. Rand McNally grants User a limited license for use
of this Product and the software incorporated in the Product for its normal
operation. By using the Product, User acknowledges that the content of this
document and the Product are the property of Rand McNally and its licensors
and are protected by U.S. copyright, trademark and patent laws and
international treaties.
THE USER MAY NOT:
- Use the Product on a network or file server, time-sharing or to process data for other persons.
- Use the Product to create any routing tables, files, databases or other compendiums.
- Copy, loan or otherwise transfer or sublicense the Product, its software or content.
- Modify, or adapt the Product in any way, or decompile, disassemble, reverse engineer or reduce to human readable form the Product and software incorporated therein.
- Alter, remove or obscure any copyright notice, trademark notice, or proprietary legend from the Product, its software or content.
This license will terminate automatically if User fails to comply with any of
the terms of this license and User agrees to stop using the Product. Rand
McNally may revise or update the Product and is not obligated to furnish any
revisions or updates to User.
RM Acquisition, LLC d/b/a Rand McNally warrants that the Product, and the
component parts thereof, will be free of defects in workmanship and materials
for a period of one (1) year from the date of first use as determined by
contact with GPS satellites. This warranty may be enforced by the first
consumer purchaser (“Customer”), provided that the product is utilized within
the U.S.A. or Canada.
Rand McNally will, without charge, repair or replace (with a new or newly
reconditioned unit), at its option, defective Products or component parts. For
repair or replacement of defective Products, Customer must contact Rand
McNally at 1-800-333-0136 for return
authorization and instructions. Customer will be required to have the product
registered via the Rand McNally Dock or, if Customer is unable to register the
product electronically, Customer will be required to provide proof of date of
first Customer purchase, such as a duplicate copy of a sales receipt, for the
warranty to be valid. When the product is connected to the Rand McNally Dock,
the Dock will record the date of first use of the device based on contact with
GPS satellites. The Customer must pay any initial shipping charges required to
ship the product for warranty service, but the return charges will be at Rand
McNally’s expense, if the product is repaired or replaced under warranty.
Repairs or replacements have a 90-day warranty. If the product sent in is
still under its original warranty, then the new warranty is 90 days or to the
end of the original one (1) year warranty, depending on which is longer.
This warranty gives the Customer specific rights. Other rights may be
available to Customer which vary from state to state.
Exclusions: This limited warranty does not apply:
- to any product damaged by accident;
- in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs;
- if the serial number has been altered, defaced or removed; or
- if the owner of the product resides outside of the U.S.A. or Canada.
Caution: Rand McNally makes no warranty as to the accuracy of completeness
of the information in the Product and disclaims any and all express, implied
or statutory warranties, including any implied warranty of merchantability or
fitness for a particular purpose. It is the user’s responsibility to use this
product prudently. This product is intended to be used only as a travel aid
and must not be used for any purpose requiring precise measurement of
direction, distance, location or topography.
RAND MCNALLY AND ITS LICENSORS DO NOT MAKE ANY OTHER WARRANTY OR
REPRESENTATION, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT,
INCLUDING ANY WARRANTY AS TO QUALITY, PERFORMANCE, TITLE OR NON- INFRINGEMENT.
IN NO EVENT WILL RAND MCNALLY OR ITS LICENSORS BE LIABLE FOR ANY INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts
and/or do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations may not apply to some consumers.
The User agrees to allow User-provided information to Rand McNally to be used
for internal business evaluation purposes, including, but not limited to,
evaluating the effectiveness of the services provided, methods to simplify or
improve User experiences. Such information will not be used by third parties
or in any way that discloses the identity of the User.
Rand McNally may make use of third party software in the Product.
Notwithstanding the terms and conditions of this license, use of some third
party materials included in the Product may be subject to other terms and
conditions. The official third party copyright notices are provided at the end
of this License.
The User agrees to indemnify, defend and hold Rand McNally and its licensors
(including their respective licensors, suppliers, assignees, subsidiaries,
affiliated companies, and the respective officers, directors, employees,
shareholders, agents and representatives of each of them) free and harmless
from and against any liability, loss, injury (including injuries resulting in
death), demand, action, cost, expense or claim of any kind or character,
including but not limited to attorney’s fees, arising out of or in connection
with any use or possession by the User of this Product.
These terms and conditions constitute the entire agreement between Rand
McNally (and its licensors and suppliers) and the User pertaining to the
subject matter hereof, and supersedes in their entirety any and all written or
oral agreements previously existing between us with respect to such subject
matter. The terms and conditions (including the license) may be updated from
time to time.
The above terms and conditions shall be governed by the laws of Illinois,
without giving effect to (i) its conflict of laws provisions, or (ii) the
United Nations Convention for Contracts for the International Sale of Goods,
which is explicitly excluded. The User agrees to submit to the jurisdiction of
Illinois for any and all disputes, claims and actions arising from or in
connection with the Data provided to the User hereunder.
User shall not export the Product in violation of any U.S. or foreign laws.
Rand McNally’s licensors shall be third party beneficiaries of Rand McNally’s
rights under this license, but are not parties hereto and have no obligations
hereunder.
By using this product you agree to be bound both by the foregoing and to the
terms of use found at www.randmcnally.com.
Actual toll costs may vary from estimates depending upon a number of factors
including inaccurate or imprecise source data and upon variable toll costs
which are dependent upon vehicle characteristics (class, axle number, weight,
etc.) that vary across toll roads.
Restricted Rights Legend. For governmental agencies: Use, reproduction or
disclosure is subject to restrictions set forth in subparagraph (c) (1) (iii)
of the Right in Technical Data and Computer Software clause at DFARS
52.227-7013, as amended.
Rand McNally, the Rand McNally logo and the globe design mark are registered
trademarks and Road Explorer is a trademark of RM Acquisition, LLC, d/b/a Rand
McNally.
Copyright © 2016 Rand McNally. All rights reserved. Portions © 2016 HERE. All
rights reserved. This data includes information taken with permission from
Canadian authorities, including © Her Majesty the Queen in Right of Canada, ©
Queen’s Printer for Ontario. © 2016 TrafficCast © Tripfilms © 2016 InfoGation.
All rights reserved. U.S. Patent Nos. 7,580,791 and 8,214,141.
Support
Visit: www.randmcnally.com/support
Phone:877-446-4863
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>