DIGITAL WATCHDOG DWC-P336CNMW Corner and Pole Mount Bracket for White IP PTZ Cameras User Guide

June 6, 2024
DIGITAL WATCHDOG

DIGITAL WATCHDOG LOGO Quick Start Guide
Corner and pole mount bracket for white IP PTZ cameras

DOC-P336CNMW

DIGITAL WATCHDOG DWC-P336CNMW Corner

WHAT’S IN THE BOX

6x plastic anchors (6pi)| 4x nut (M8)
6x tapping screws (6×50)| 2x hose band (275mm)
4x machine screws, PH (M6x25)| 1x quick setup guide
4x machine screws, PH (M8x35)|

NOTE: Download all your support materials and tools in one place

  1. Go to: http://www.digital-watchdog.com/resources
  2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part numbers will populate automatically based on the part number you enter.
  3. Click ‘Search’. All supporting materials, including manuals and quick start guide (QSGs), will appear in the results.

DIGITAL WATCHDOG DWC-P336CNMW Corner - QR

http://bit.ly/resources_qr

Tel: +1 866-446-3595 / 813-888-9555
Technical Support Hours: 9:00 AM – 8:00 PM EST, Monday through Friday
digital-watchdog.com

COMPOSITION

Mounting the accessory to a structure’s pole
Feed the hose bands through the vertical stills located on the four corners of the mounting flaps as shown to the right. Wrap the hose bands around the pole- like structure then use the driver to rotate the screw attached at the end of the hose bands clockwise. Rotating the screw shortens the bands, thereby fastening around the structure.
DIGITAL WATCHDOG DWC-P336CNMW Corner - COMPOSITIONMounting the accessory to a structure’s corner
Using the pole and mounting bracket as a template, mark the locations of the six screw holes where the mounting adaptor will go. Install the plastic anchors (D6) at the six pre-marked locations. Use the screws with washers to affix the mount adaptor to the corner of a building structure.
DIGITAL WATCHDOG DWC-P336CNMW Corner -COMPOSITION 1Mounting a power box to the pole and corner mount bracket Using the appropriate screws and nuts supplied, affix the power box base to the pole and corner mount at the four corners of the mounting surface.
DIGITAL WATCHDOG DWC-P336CNMW Corner - COMPOSITION 2Using the appropriate screws and nuts supplied, affix the wall mount to the pole and corner mount at the four corners of the mounting surface as shown below.
A – Installation using DWC-P336WM
B – Installation using DWC-P220WM

DIGITAL WATCHDOG DWC-P336CNMW Corner -COMPOSITION 3

DIGITAL WATCHDOG DWC-P336CNMW Corner - COMPOSITION 4

Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
Rev Date: 01/20

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

DIGITAL WATCHDOG User Manuals

Related Manuals