amazon Hygrothermograph User Manual
- June 6, 2024
- Amazon
Table of Contents
User manual of Hygrothermograph
Product Specification
Temperature Measuring Range:-50 C -+70 C (-58º F–158º F)
Temperature Measuring Accuracy:=1 C (1.8º F)
Temperature Resolution:0.1 C (0.2º F)
Humanity Measuring Range:10°,0RH-99° oltH
Humanity Measuring Accuracy:=5″0RH
Humanity Resolution: 1″,,
Used Battery: AAA I.5V
Basic Function
Temperature Humidity Display
C F Temperature Switch Display
Maximum Minimum Temperature and Humidity Memory Function
12’24 Hourly Clock
Hourly Chime Function
Daily Alarm Function
Calendar Display Function
Operation Method
- Burst through battery door according to the indicated direction in product back and take out separator, and then put this batter! door in the back. this product just can be used.
- Key Function:[MODE] is to switch clock a:1rd alarm clock display modes and set current time. alan time.12or 24hourly system and date:[ADJ; i. to adjust values of setiterms: [MEM ORY]is to display maximum & minimum humidity and temperature values in memory. and remove memorized maxi mum&minimum temperature and humidity values:I CrFJis to switch temperature unit to display temperature in C (degree Celsius)or to F(degree Fahrenheit):
- Under original state. Press the [Mode]key fur 2 seconds to make the minute value in the current time begin to twinkle. and press[ADJ1 key to adjust the minute number. and continuously press the [MODE] key to respawn. Ely set “Clock”. “12 24″. ” Month( Mr and”Day(D)”
- Under current clock modest points between clock and mm ute twinkle one-time per minute).press[MODE]on time to switch display as clock model two points between clock and minute don’t twinkle).and no press[ADJ]key to witch on and off of”Quarter Bell (Alarm)” function “hourly chime” ( •))))function Press[MODE]key for another two seconds to set alarm time, and meanwhile. start “Holy Chime–function. sign( •))))appears
- Under alarm clock mode. automatically get back the current clock in one minute in case of no operation and pressIADJIkey one time to snitch to calendar display. and automatically return to the current clock after three seconds; press MAX MIN key to display maximum value of temperature humidity since last clear( CLE A R
- Press [MEMORY! key to display memorized maximum (MAX) and minimum(MIN) values of temperature humidity.. and press[MEMORY]key For more than two seconds to men prized maximum-minimum value.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>