HidrateSpark HPAS2ZM Insulated Bluetooth Smart Water Bottle User Guide
- June 6, 2024
- HidrateSpark
Table of Contents
HidrateSpark HPAS2ZM Insulated Bluetooth Smart Water Bottle
- Chug Lid
- Bottle Body
- Sensor Puck
- Charging Cable
SUPPORT
We’re here to support you.
If you ever need to contact us, here’s how:
Chat with us on our website
hidratespark.com
Email: [email protected]
In App Help
For more information and best practices, please visit
hidratespark.com/pages/guide to review
the user manual.
GLOW REMINDERS
- When setting up your bottle you have the choice to pick your reminder glow color in the Bottles section of the App.
- Please see hidratespark.com/pages/guide to view all glow reminders and further information.
DISASSEMBLING & ASSEMBLING SENSOR PUCK
- To disassemble puck from body, turn bottle upside down and unscrew puck counterclockwise from the body until puck pulls free.
- To assemble puck to the body, turn bottle upside down and screw in the puck clockwise to the body until puck snaps into place. Please make sure puck is fully assembled and secured to the body to ensure accurate sip readings.
Information: Upon reassembly, we recommend recalibrating your sensor within the app.
RECHARGEABLE BATTERY INSTRUCTIONS
- To charge, turn bottle upside down and remove puck.
- Place puck on flat surface and attach the magnetic end of the HidrateSpark charging cable to the puck.
- While charging your puck will illuminate and FLASH GREEN.
- Once fully charged your puck will remain SOLID GREEN.
CLEANING INSTRUCTIONS
- Before washing, ALWAYS remove sensor puck. Sensor puck must only be cleaned by using a damp cloth. NEVER submerge or dishwash sensor puck.
- Wash lid and stainless steel body thoroughly before first use.
- RINSE LID & STAINLESS STEEL BODY AFTER EACH USE with the lid in the open position.
- Lid is Top-Rack Dishwasher Safe.
- The Body is HAND WASH ONLY. To clean the sensor puck only use a damp cloth. Never submerge or dishwash the sensor puck.
- ALWAYS STORE BOTTLE WITH THE LID & SENSOR PUCK REMOVED to allow parts to dry completely.
Information: Upon reassembly, we recommend recalibrating your sensor within the app.
DOWNLOAD THE APP
- Download our free HidrateSpark Smart Water Bottle App from the App Store or on Google Play.
- Check that you have an internet connection and your Bluetooth is turned on. Follow the steps in the app to create an account, set parameters for a personalized hydration goal, add your bottle to your profile, and set your push notifications and glow reminders.
- Set down your bottle after every refill and drink. Remember to sync the app near the bottle each day so your water is tracked correctly.
ATTENTION
- DO NOT overload or squeeze the sensor puck as it can damage internal electronics.
- Your HidrateSpark Steel uses a built-in rechargeable li- ion battery. Bottle includes a magnetic USB charging cable for all your charging needs.
- Product is NOT designed for hot liquids. Use only with cold liquids.
- Not for use with carbonated or pulpy beverages.
- Prior to drinking, make sure the lid is properly threaded to the body and screwed on completely.
- DO NOT overfill. Fill liquids below the threads to avoid accidental spilling.
- DO NOT microwave or freeze.
- DO NOT use cleaners containing bleach, chlorine, abrasives and/or harsh chemicals.
- DO NOT continue to use if product is damaged.
- DO NOT carry bottles containing liquid in bags to help prevent accidental opening.
- Recommended for indoor and office use only.
- Recommend recalibration if your bottle encounters a drop impact.
References
- Smart Water Bottle - HidrateSpark Bluetooth Water Bottle + Tracker App – Hidrate Inc
- Guide – Hidrate Inc
Read User Manual Online (PDF format)
Loading......