tc electronics JUNE-60 V2 CHORUS User Guide

June 6, 2024
tc electronics

tc electronics logo JUNE-60 V2 CHORUS

Authentic Recreation of the Juno-60 Synthesizer Chorus with 2-Button Interface and BBD Circuitry
Quick Start Guide

tc electronics JUNE-60 V2 CHORUS - overview1| tc
electronics JUNE-60 V2 CHORUS - overview2
---|---

Controls and Connectors

  1. Input/Output jacks ­
    –Connect a 1/4″ TS cable from your guitar to the INPUT jack.
    Mono setup: Set slider to MONO and connect a 1/4″ TS cable from the OUTPUT jack to your amplifier.
    Stereo setup: Set slider to STEREO and connect a 1/4″ TRS split cable from the OUTPUT jack to a pair of amplifiers.
    Note: Input impedance has two options designed to optimize performance for guitar or keyboard. Access the internal INPUT LEVEL slide switch (SW6) to choose the optimal option for your setup
    tc electronics JUNE-60 V2 CHORUS - Controls1

  2. 9 V DC ­
    –Connect a standard 9 V power supply

  3. Footswitch ­
    –Turns the effect on and off. The LED will (1) LFO SPEED ­ Select FAST or SLOW for preset I and/or II.
    light when the pedal is engaged. The pedal operates in true bypass when disengaged.

  4. Mode
    –Press button I or II to select between 2 chorus preset settings. Press buttons I and II simultaneously to activate a 3rd chorus preset setting.
    Note: Preset I and II LFO speeds can be changed independently via the internal LFO SPEED DIP switch (SW5).
    SLOW = Original JUNO settings (recommended for keyboards)
    FAST = Original JUNE 60 settings (recommended for guitar)
    tc electronics JUNE-60 V2 CHORUS - Controls2

Settings

| I| II|

III (I+II)

---|---|---|---
SLOW|

0.5 Hz

|

0.83 Hz

|

10 Hz

FAST|

1.3 Hz

|

2.2 Hz

  1. Mono/Stereo switch
    –Select between MONO and STEREO mode.
    Internal Option Switches
    tc electronics JUNE-60 V2 CHORUS - Switches

  2. INPUT LEVEL
    – Select between input impedance for
    GUITAR or KEYBOARD.

  3. LFO SPEED
    – Select FAST or SLOW for preset I and/or II.

Battery Replacement

tc electronics JUNE-60 V2 CHORUS - Battery
Replacement1| tc electronics JUNE-60 V2
CHORUS - Battery Replacement3
---|---

Storage

tc electronics JUNE-60 V2 CHORUS - Storage

Specification

Connectors


Input (mono)| 1/4″ TS, unbalanced
Impedance| 500 kΩ (guitar) /12 kΩ (keyboard)
Output (mono/stereo)| 1/4″ TS or TRS, unbalanced
Impedance| 100 Ω
Power input mA| Standard 9 V DC, center negative, >100 (not included)
Battery option| Internal 9 V battery  connector

Physical

Dimensions (H x W x D)| 56 x 86 x 137 mm
(2.2 x 3.4 x 5.4″)
Weight| 0.5 kg (1.1 lbs)

FEDERAL COMMUNICATIONS COMMISSION
COMPLIANCE INFORMATION

tc electronics logo JUNE-60 V2 CHORUS


Responsible Party Name: Address:| Music Tribe Commercial NV Inc.
Phone Number:| 901 Grier Drive Las Vegas, NV 89118 USA
Responsible Party Name: Address:| +1 747 237 5033

JUNE-60 V2 CHORUS
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly on or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances, and other information are subject to change without notice.
All trademarks are the property of their respective owners.
Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd.
© Music Tribe Global Brands Ltd. 2021 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals