Baponka MX3 True Wireless Earbuds BH480B User Manual
- June 6, 2024
- Baponka
Table of Contents
Baponka MX3 True Wireless Earbuds BH480B
PACKING LIST
DIAGRAM
POWER ON
- The earphones automatically turn on(with blue LED light flashing) and start pairing when you open the charging case.
- In the shutdown status and when the earphones are not in the charging case, simultaneously press and hold the MFB of both earbuds for 2 seconds to power on ( with the blue LED light flashing).
POWER OFF
- Put the earphones back in the charging case and close the case to turn them off.
- If the earphones are not in the charging case, just press and hold the MFB of either earbud for 5 seconds to power them off. ( Mode 2 cannot be conducted during music playing or calling.)
PAIRING
Open the charging case, they will automatically enter the pairing mode in
which the LED light flashes blue and red alternately, and then select “MX3”.
Note: The earbud will reconnect to the paired device by priority. If you
want to pair to the second smartphone, please disconnect Bluetooth on the
paired smartphone.
MUSIC
INCOMING CALL
MUSIC & INCOMING CALL & Siri
Volume Up / Down
Volume + : Press and hold the MFB button of Right earbud to turn up the
volume increasingly.
Volume – : Press and hold the MFB button of Left earbud to turn down the
volume decreasingly.
Next / Previous Track
Next Track: Triple-tap the MFB of Right earbud. Previous Track: Triple-
tap the MFB of Left earbud.
Play / Pause
Double tap the MFB of either earbud.
Answer
Tap the MFB of either earbud once.
Mute
When you are having a phone call, you can tap either earbud once to mute or
unmute the earbud’s microphone.
Hang up
Double tap the MFB of either earbud.
Reject
Press and hold the MFB of either earbud for 1 second.
Activate Siri
When in standby and music mode, firstly tap the MFB of either earbud once, and
then instantly press and hold the earbud for 1 second.
RESET
- Make sure Bluetooth is turned off in your device.
- When both earbuds are in the charging case, simultaneously press and hold both earbuds for 10 seconds to clear paired devices.
- The earbud’s light will flash red and blue simultaneously, which means successful resetting.
CHARGING
Mode1: Wired Charging
Mode2： Wireless Charging
Note: wireless charger is sold separately.
Do not put the earbuds in the charging case when the earbuds are wet.
CORRECT DISPOSAL OF THIS PRODUCT
( Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature, indicate that it should
not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
user should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take this
item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contact. This product should not be mixed with
other commercial wastes for disposal.
FCC STATEMENT
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>