MPOW BH463A M12 True Wireless Earbuds User Manual

June 6, 2024
MPow

M12
TRUE WIRELESS EARBUDS
MODEL : BH463A
USER MANUAL

MPOW BH463A M12 True Wireless Earbuds

PACKING LIST

MPOW BH463A M12 True Wireless Earbuds -

DIAGRAM

MPOW BH463A M12 True Wireless Earbuds - DIAGRAM

POWER ON

Mode 1

MPOW BH463A M12 True Wireless Earbuds - Mode 1

Mode 2

MPOW BH463A M12 True Wireless Earbuds - Mode 2

  1. The earphones automatically turn on(with blue LED light flashing) and start pairing when you open the charging case.
  2. In the shutdown status and when the earphones are not in the charging case, simultaneously press and hold the MFB of both earbuds for 2 seconds to power on ( with the blue LED light flashing).

POWER OFF

Mode 1

MPOW BH463A M12 True Wireless Earbuds -Mode 1

Mode 2

MPOW BH463A M12 True Wireless Earbuds - Mode

  1. Put the earphones back in the charging case and close the case to turn them off.
  2. If the earphones are not in the charging case, just press and hold the MFB of both earbuds for 5 seconds to power them off.(Mode 2 cannot be conducted during music playing or calling.)

PAIRING

MPOW BH463A M12 True Wireless Earbuds - PAIRING

  1. Open the charging case, they will automatically enter the pairing the mode in which the LED light flashes blue and red alternately, and
    then select “M12”.
    Note: The earbud will reconnect to the paired device by priority. If you want to pair to the second smartphone, please disconnect Bluetooth on the paired smartphone.

MUSIC

MPOW BH463A M12 True Wireless Earbuds - MUSIC

INCOMING CALL

MPOW BH463A M12 True Wireless Earbuds - INCOMING CALL

MUSIC & INCOMING CALL & Siri

  • Volume Up / Down
    Volume +: press and hold the MFB button of the Right earbud to turn up the volume increasingly.
    Volume -: press and hold the MFB button of the Left earbud to turn down the volume decreasingly.

  • Next / Previous Track
    Next Track: double-tap the MFB of the Right earbud.
    Previous Track: double-tap the MFB of the Left earbud.

  • Play / Pause
    Tap the MFB of either earbud once.

  • Answer / Hang Up
    Double-tap the MFB of either earbud.

  • Reject
    Press and hold the MFB of either earbud for 2 seconds.

  • Activate Siri
    Triple-tap the MFB of either earbud.

RESET

MPOW BH463A M12 True Wireless Earbuds - RESET

  1. Make sure Bluetooth is turned off on your device.
  2. When both earbuds are in the charging case, simultaneously press and hold both earbuds for 5 seconds to clear paired devices.
  3. The earbud’s light will flash red and blue simultaneously, which means successful resetting.
  4. The LED will go out. 1 second later, M12 will automatically enter back into pairing mode.

CHARGING

Mode1: Wired Charging

MPOW BH463A M12 True Wireless Earbuds - CHARGINGMPOW BH463A M12 True Wireless Earbuds -
CHARGING2

Mode2 :Wireless Charging

MPOW BH463A M12 True Wireless Earbuds -Wireless
Charging

Note: the wireless charger is sold separately.

MPOW BH463A M12 True Wireless Earbuds -Wireless
Charging2

Do not put the earbuds in the charging case when the earbuds are wet.

CORRECT DISPOSAL OF THIS PRODUCT

( Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals