MPOW BH481A MBits S True Wireless Earbuds User Manual

MPOW BH481A MBits S True Wireless Earbuds

PACKING LIST

DIAGRAM

POWER ON

1. The earphones automatically turn on (with blue LED light flashing) and start pairing when they are taken out from the charging case.
2. In the shutdown status and when the earphones are not in the charging case, simultaneously press and hold the MFB of both earbuds for 2 seconds to power on ( with the blue LED light flashing).

POWER OFF

1. Put the earphones back in the charging case, and they’ll shut down automatically.
2. If the earphones are not in the charging case, just press and hold the MFB of both earbuds for 5 seconds to power them off. (Mode 2 cannot be conducted during music playing or calling.)

PAIRING

1. The earphones automatically start pairing (The LED will flash red and blue quickly on either earbud) when they are taken out from the charging case, and choose “MBits S” on your device.
2. Manually Switch to Pairing Mode:
   When both earbuds are not in the charging case and in the state of power-off (keep pressing both MFB for 5 seconds to turn them off).
   Keep pressing both MFB for 4 seconds to re-enter into pairing mode in which LED flashes blue and red alternately.
   Finally, choose “MBits S” on your device.

MUSIC

INCOMING CALL

• Volume Up / Down
  Volume + : press and hold the MFB button of Right earbud to turn up the volume increasingly.
  Volume – : press and hold the MFB button of Left earbud to turn down the volume decreasingly.

• Next / Previous Track
  Next Track: double tap the MFB of Right earbud.
  Previous Track: double tap the MFB of Left earbud.

• Play / Pause
  Tap the MFB of either earbud once.

• Answer
  Tap the MFB of either earbud once.

• Mute
  When you are having a phone call, you can tap either earbud once to mute or unmute the earbud’s microphone.

• Hang Up
  Double tap the MFB of either earbud.

• Reject
  Press and hold the MFB of either earbud for 1 second.

• Activate Siri
  Triple-tap the MFB of either earbud.

RESET

In the state of charging, simultaneously press and hold the MFB of both earbuds for 10 seconds. The LED light will flash blue, which means that the paired information is cleared successfully.

CHARGING

Do not put the earbuds in the charging case when the earbuds are wet.

CORRECT DISPOSAL OF THIS PRODUCT

( Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature,indicate that it should not be disposed with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.Household user should
contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>