Honeywell Dolphin CT60 User Guide
- June 6, 2024
- Honeywell
Table of Contents
- Out of the Box
- Memory Card Specifications
- Mobile Computer Features
- Install a microSD Card (SD)
- Install a microSIM Card (SIM 1)
- Install a Secondary microSIM Card (SIM 2)
- Install the Battery
- Charge the Mobile Computer
- Turn Power On/Off
- Battery Replacement
- Swap Battery Mode
- Sleep Mode
- Adjust the Display Sleep Time
- About the Home Screen
- Navigation and Function Buttons
- About Provisioning Mode
- Sync Data
- Restart the Mobile Computer
- Support
- Documentation
- Limited Warranty
- Patents
- Trademarks
- Disclaimer
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Dolphin™ CT60
powered by Android™
Quick Start Guide
CT60-A-EN-QS-02 Rev A 5/20
Out of the Box
Make sure that your shipping box contains these items:
- Dolphin CT60 mobile computer (Model CT60L0N or CT60L1N)
- Rechargeable 3.85 VDC Li-ion battery
- Product documentation
If you ordered accessories for your mobile computer, verify that they are also
included with the order. Be sure to keep the original packaging in case you
need to return the mobile computer for service.
Note: CT60L0N models do not include a WWAN radio.
Memory Card Specifications
Honeywell recommends the use of Single Level Cell (SLC) industrial-grade microSD™ or microSDHC™ memory cards with Dolphin mobile computers for maximum performance and durability. Contact a Honeywell sales representative for additional information on qualified memory card options.
Mobile Computer Features
*Navigation Panel icons may vary depending on the unit type.
Note: Hand strap not shown.
Install a microSD Card (SD)
Note: Format the microSD card before initial use.
Note: Always power off the computer and remove the battery before attempting to install or remove a card.
Install a microSIM Card (SIM 1)
Phone feature is available only on CT60L1N models.
On all models, when using a UICC card for NFC Secure Element link encryption,
install the card in SIM slot 1.
Note: Always
power off the computer and remove the battery before attempting to install or
remove a card.
Install a Secondary microSIM Card (SIM 2)
Note: Feature available on CT60L1N Models only.
Note:
Always power off the computer and remove the battery before attempting to
install or remove a card.
Install the Battery
The CT60 mobile computer ships with a Li-ion 3.85 VDC, 15.5 watt-hour battery manufactured for Honeywell International Inc.
Ensure all components are dry prior to placing the battery in the computer. Mating wet components may cause damage not covered by the warranty.
Charge the Mobile Computer
The CT60 mobile computer ships with a partially charged battery. Charge the
battery with a CT50 Series charging device for a minimum of 4 hours. Using the
computer while charging the battery increases the time required to reach a
full charge.
We recommend the use of Honeywell accessories and power adapters. Use of
any non-Honeywell accessories or power adapters may cause damage not covered
by the warranty.
CT60 mobile computers are designed for use with the following CT50 Series
charging accessories: HomeBase, Ethernet HomeBase, ChargeBase, NetBase, Quad
Battery Charger, Vehicle Power Adapter, Vehicle Dock, and USB Adapter.
Ensure all components are dry prior to mating the computers and batteries
with peripheral devices. Mating wet components may cause damage not covered by
the warranty.
We recommend the use of Honeywell Li-ion battery packs. Use of any non-
Honeywell battery may result in damage not covered by the warranty.
Turn Power On/Off
The first time you power on the computer, a Welcome screen appears. You can
either scan a configuration bar code or use the Wizard to manually set up the
computer. Once setup is complete, the Welcome screen no longer appears on
startup, and the Provisioning mode is automatically turned off (disabled).
To turn the computer on
- Press and hold the Power button for approximately 3 seconds, and then release.
To turn the computer off
- Press and hold the Power button until the options menu appears.
- Touch Power off.
Battery Replacement
Before removing the battery, always do one of the following:
- Power off the computer.
- Place the unit in Swap Battery mode (feature availability is model-dependent).
Swap Battery Mode
Swap Battery mode places the computer in a low power state so that the battery can be removed for a short time. This feature is not available on all models. To activate Swap Battery mode:
- Press and hold the Power button until the options menu appears.
- Touch Swap Battery and follow the on-screen instructions.
- Once you replace the battery, press the Power button.
Sleep Mode
Sleep mode automatically turns the touch panel display off and locks the computer to save battery power when the computer is inactive for a programmed period of time.
- Press and release the Power button to wake the computer.
- Drag the toward the top of the display to unlock the computer.
Adjust the Display Sleep Time
To adjust the amount of time before the display sleeps after inactivity:
- Swipe up from the bottom of the Home screen to access all apps.
- Touch Settings > Display > Advanced > Sleep.
- Select the amount of time before the display goes to sleep.
- Touch to return to the Home screen.
About the Home Screen
To learn how to
customize the Home screen, see the user guide.
Navigation and Function Buttons
| Button | Description |
|---|---|
| Back | Return to the previous screen. |
| Recent Apps | View and switch between recently used apps. |
| Home | Return to the Home screen. |
| Search | Start a search on the computer or the Internet. |
| Volume | Raise or lower the volume of the speaker. |
| Scan | Press the right or left scan button to trigger the scanner. |
| Camera | Press to open the camera app and take a photo. |
To learn more about how to remap a button, see the user guide.
About Provisioning Mode
After completing the out-of-box setup process, the Provisioning mode is
automatically turned off. Scanning a bar code to install applications,
certificates, configuration files, and licenses on the computer is restricted
unless you enable Provisioning mode in the Settings app. To learn more, see
the user guide.
Scan a Bar Code with the Scan Demo
Note: For optimum performance, avoid reflections by scanning the bar code
at a slight angle.
- Swipe up from the bottom of the Home screen to access all apps.
- Touch Demos > Scan Demo.
- Point the computer at the bar code.
- Touch Scan on the touch screen or press and hold a Scan button. Center the aiming beam over the bar code.
The decode results appear on the screen.
Note:
In the Scan Demo app, not all bar code symbologies are enabled by default.
If a bar code does not scan, the correct symbology may not be enabled. To
learn how to modify the default app settings, see the user guide.
Sync Data
To move files between your CT60 and a computer:
- Connect the CT60 to your computer using a USB charge/ communication accessory.
- On the CT60, swipe down from the top of the screen to see the notifications panel.
- Touch the Android System USB Connection notification twice, to open the options menu.
- Select either Transfer files or Transfer photos (PTP).
- Open the file browser on your computer.
- Browse to the CT60. You can now copy, delete and move files or folders between the computer and CT60 as you would with any other storage drive (e.g., cut and paste or drag and drop).
Note: When Provisioning mode is turned off, some folders are hidden from view in the file browser.
Restart the Mobile Computer
You may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up.
- Press and hold the Power button until the options menu appears.
- Select Reboot.
To restart the computer if the touch panel display is unresponsive:
- Press and hold the Power button for approximately 8 seconds until the computer restarts.
Note: If you try to restart the computer and still experience issues, you may need to see the user guide for information on how to perform a Factory Reset (Clean Boot).
Support
To search our knowledge base for a solution or log into the Technical Support Portal and report a problem, go to www.hsmcontactsupport.com.
Documentation
Product documentation is available at www.honeywellaidc.com.
Limited Warranty
For warranty information, go to www.honeywellaidc.com and click Resources > Product Warranty.
Patents
For patent information, see www.hsmpats.com.
Trademarks
Android is a trademark of Google LLC.
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in
specifications and other information contained in this document without prior
notice, and the reader should in all cases consult HII to determine whether
any such changes have been made. The information in this publication does not
represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from
the furnishing, performance, or use of this material. HII disclaims all
responsibility for the selection and use of software and/or hardware to
achieve intended results.
This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated into another language without the prior written
consent of HII.
Copyright © 2018-2020 Honeywell International Inc. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>