MPOW BH219B Bluetooth Music Receiver User Manual

MPOW BH219B Bluetooth Music Receiver

Any issues during usage, please contact support@xmpow.com to get professional services.

Package List

Diagram

1. Power ON/OFF
2. Audio Output port
3. Micro USB Charging Port
4. Microphone
5. Previous Song /Volume Down
6. Next Song/Volume Up
7. Indicator Light
8. Play/ Pause: Answer/ Hang up

Power ON/OFF

Power On

1. Toggle to “ON”
2. Red light stays on for 1s
3. Red and blue lights flash alternately

Power Off

1. Toggle to “OFF”
2. BH129 automatically turns off after the red light being on for 1s.

Bluetooth Connection

1. Connect with One Mobile Phone
   Pairing mode. the indicator light flashes red and blue alternately. Successfully connected: the indicator light flashes blue intermittently. Enter the code “0000” if needed.
   

2. Connect with Two Mobile Phones
   Step 1: After the first device is successfully connected, turn it off.
   Step 2: Operate the second device to connect with BH129, then tum on the first connected device.
   

3. Clear the Bluetooth Pairing List (on the power-on state)
   Press and hold on the button for about 8s and do not release it until the red and blue light stays on for 7 sat the same time.

Play Music

Pause / Play / Next Song / Volume Up / Previous Song / Volume Down

Answer / Hang up / Redial / Reject

Voice Assistant

Switch Audio Source

During a call, select a mobile phone or BH129 to answer a call.

New Call During A Call

Hang up one and answer another

Low Battery Alarm

1. When the battery runs low. it will automatically alarm. The light flashes red 15 times quickly and then slowly.
2. When the battery power is less than 3V. it will automatically shut down.

Charge

When battery runs low or unable to turn on, charge it.

Dormancy

1. If there is no operation or connection after the receiver being turned on, it will automatically enter sleep mode after 7 0 minutes. Click FORWARD button for 7 second or re-toggle the switch to wake it up. The power consumption of the dormancy state is about 7 OµA the same as that in the state of shut-down.
2. When the connection between receiver and mobile phone is out of distance, it will automatically enter sleep mode after 20 minutes. Click FORWARD button for 1 second or re-toggle the switch to wake it up.

Note:

1. The normal charging voltage range of the product is between 4.5V and 6.5V. Do not use any charging devices out of the range to avoid damage.
2. Please charge the receiver timely when battery runs low or not be used for a long time to avoid that the product does not work properly or the battery is damaged.
3. Because the Bluetooth wireless signal is easily interfered by the surrounding environment blocked or absorbed by the objects, please place the Bluetooth receiver and the device in a barrier-free position for better Bluetooth wireless music transmission.

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

www.xmpow.com | support@xmpow.com
MPOW TECHNOLOGY CO., LTD

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>