DIGITAL WATCHDOG DWC-P220CMW Ceiling Mounting Bracket User Guide

June 6, 2024
DIGITAL WATCHDOG

DIGITAL WATCHDOG logo Quick Start Guide
Ceiling mounting bracket for white analog PTZ cameras
DWC-P220CMW

DIGITAL WATCHDOG DWC-P220CMW Ceiling Mounting

WHAT’S IN THE BOX

1x Teflon tape 1x Teflon tape
4x O-ring 4x O-ring
1x hex Allen wrench (2.5) 1x hex Allen wrench (2.5)
3x plastic anchors (6pi) 3x plastic anchors (6pi)
3x tapping screws, PH (6×35) 3x tapping screws, PH (6×35)

NOTE: Download all your support materials and tools in one place.

  1. Go to: http://www.digital-watchdog.com/resources
  2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results for applicable part numbers will populate automatically based on the part number you enter.
  3. Click ‘Search’. All supporting materials, including manuals and quick start guide (QSGs) will appear in the results.

Tel: +1 866-446-3595 / 813-888-9555
digital-watchdog.com
Technical Support Hours: 9:00 AM – 8:00 PM EST, Monday through Friday

INSTALLING THE MOUNTING ACCESSORY

A. Attach the mount base ( 1) and plate (2 ) to the mounting surface using the supplied M6 tapping screws (3 ) and plastic bushings ( 4).
B. Wind Teflon tape around both threaded ends of the pipe (about 20 times) for sealing. If necessary, use a silicone rubber sealant to seal the area where the mount base and the pipe meet.
C. Fit the pipe (of which threads are covered by Teflon tape) into the mount base ( 1) and turn until it is securely fastened.
D. Pull all the required cables through the mount base (1 ) and pipe ( 5).
E. Align the dome adaptor ( 6) with the pipe and turn until it is securely fastened.
F. Fasten the mount base (1 ), dome adaptor ( 6) using the set screw.
G. Fasten the vandal-proof dome housing to the dome adaptor ( 6) using an M6 x 12 machine screw.
DIGITAL WATCHDOG DWC-P220CMW Ceiling Mounting- MOUNTING
ACCESSORY MOUNTING THE CAMERA TO THE MOUNTING ACCESSORY USING A JUNCTION BOX OR MOUNTING PLATE

DIGITAL WATCHDOG DWC-P220CMW Ceiling Mounting- MOUNTING
PLATE

CABLING THE CAMERA

  1. Cable passing through the wallDIGITAL WATCHDOG DWC-P220CMW Ceiling Mounting- Cable passing
  2. Cable on the wall (Remove the conduit knockout for cable passing through)DIGITAL WATCHDOG DWC-P220CMW Ceiling Mounting- knockout
  3. Cable passing through the wall with the junction box (Attention to the plate side)DIGITAL WATCHDOG DWC-P220CMW Ceiling Mounting- junction box

Dimensions Inches (mm)

DIGITAL WATCHDOG DWC-P220CMW Ceiling Mounting-
Dimensions

Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

DIGITAL WATCHDOG User Manuals

Related Manuals