Whirlpool 5.0 Cu. Ft. Washer Machine User Guide
- June 3, 2024
- Whirlpool
Table of Contents
Front Load Washer Quick Start Guide
OPERATING INSTRUCTIONS
WARNING
Fire Hazard Never place items in the washer that are dampened with gasoline
or other flammable fluids.
No washer can completely remove oil. Do not dry anything that has ever had any
type of oil on it (including cooking oils). Doing so can result in death,
explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS , located in your
appliance’s Owner’s Manual, before operating this appliance.
NOTES:
- Not all features and cycles are on all models, and control panel appearance may vary
- If your model has a touch interface, the control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are registered, touch the control panel with your fingertip, not your fingernail. When selecting a setting or option, simply touch its name.
- If your model has physical buttons, make sure to press the button firmly.
- At cycle completion, your setting and option choices will be remembered for the next cycle. However, if power to the washer is lost, the settings and options will go back to the factory defaults.
Button Descriptions
-
POWER/CANCEL
Select to turn the washer on and off. Select to stop/cancel a cycle at any time. -
WHAT TO WASH/HOW TO WASH
First determine what items are in the load that you are trying to wash. Use that to guide your “What to Wash” selection. Then determine how you want the washer to wash them and make the appropriate “How to Wash” selection. See online “Cycle Guide” for cycle details. If you do not make a “How to Wash” selection, the washer will automatically select the recommended or last-used “How to Wash” cycle. -
START/PAUSE Touch and hold for 3 seconds until the light above Start/Pause comes on to start a cycle, or touch once while a cycle is in process to pause it.
-
CYCLE STATUS
The Cycle Status display shows the progress of a cycle. At each stage of the process, you may notice sounds or pauses that are different from traditional washers.
Estimated Time Remaining
The Estimated Time Remaining shows the time required for the cycle to complete. Factors sch as
load size, modifiers, options selected, and water pressure may affect the time shown in the display. Tightly packed loads, unbalanced loads, or excessive suds may cause the washer to lengthen the cycle time as well.
Sensing
When Start/Pause is touched, the washer will chime, indicating it is starting. The drum will make a partial turn. The door will click when it locks. Once the door has locked, the washer will begin spinning to sense the load size. This sensing process will continue throughout the cycle.
After the load size is sensed, the estimated time based on load size will be displayed and water will be added. You may hear water flowing through the dispenser, adding detergent to the load. The actual cycle time may be lengthened; however, the display will continue to show the estimated time.
Washing
During the wash cycle, this will display to let you know the cycle is in progress.
Drying (on some models)
During a drying cycle, this will display to let you know the drying cycle is in progress.
PreSoak
This symbol will be displayed to let you know a PreSoak is in progress.
Detergent Low (on some models)
When detergent in the bulk dispenser is running low, the display will show the detergent level (Low).
Add Garment
When “Add Garment” is displayed, you may pause the washer, open the door, and add items. Touch and hold StarUPause to start the washer again.
Door Locked
The Door Locked symbol will display to indicate that the door is locked and cannot be opened without first pausing or canceling the cycle.
Control Lock
When the Control Lock symbol is displayed, the buttons are disabled. Touch and hold Extra Rinse for 3 seconds to enable the buttons.
FanFresh® (on some models)
This symbol will be displayed when the FanFresh® option is activated. The fan will turn on and the load will tumble periodically for up to 12 hours.
End
Once the cycle is complete, “End” will display. Remove the load promptly for best results.
Step 1. Add HE Detergent
NOTE: See the “Adding Laundry Products” section in your Owner’s Manual for more information on adding HE detergent, fabric softener, and/or bleach.
Step 2. Load Clothes
Add load loosely. Items need to move freely for best cleaning.
Step 3. Turn Power On
Step 4. Close Door; then Select Cycle and Settings
Step 5. Press Start/ Pause
-
CYCLE MODIFIERS
When you select a cycle, its default settings will light up. Touch to adjust cycle modifiers on the washer before touching StarUPause. Additional wash modifiers or options selected after touching StarUPause may not activate. Once a wash setting is selected, it is saved for the cycle selected. To return to factory default cycle settings, unplug washer for 30 seconds; then plug back in. See online “Cycle Guide” for default cycle settings.
NOTE: Some modifiers may increase or decrease the estimated time remaining.
Temp
The recommended wash temperature is preset for each cycle. Some preset temperatures can be changed. You may select a different wash temperature based on the level of soil and type of fabric being washed. For best results, use the warmest wash water safe for your fabric, following the garment label instructions. All wash temperatures feature a cold rinse.
Spin
The recommended spin speed is preset for each cycle. Some preset speeds can be changed.
• Faster spin speeds mean shorter dry times, but may increase wrinkling in your load.
• Slower spin speeds reduce wrinkling, but will leave your load more damp. Soli The recommended soil level is preset for each cycle. Some preset soil levels can be changed. For heavily soiled and sturdy fabrics, select the Heavy Soil setting. For lightly soiled and delicate fabrics, select the Light Soil setting. Lower soil level settings will help reduce tangling and wrinkling. -
UTILITY CYCLES
Clean Washer with affresho Use this every 30 washes to keep the inside of your washer fresh and clean. This cycle uses a higher water level. Use with affreshe Washer Cleaner tablets or liquid chlorine bleach to thoroughly clean the inside of your washer. When using this cycle, the drum should be empty. This cycle should not be interrupted. See “Washer Care” in the “Washer Maintenance and Care” section of your Owner’s Manual. Drain & Spin This cycle removes excess water from the load or special-care items washed by hand. Use this cycle after a power failure. For some fabrics, you may choose to set a slower spin speed. -
CYCLE OPTIONS
You may add or remove options for each cycle. Not all options can be used with all cycles, and some are preset to work with certain cycles. Options vary by model.
Cycle Guide — Normal Cycle
Settings and options shown in bold are default settings for that wash cycle.
For best fabric care, choose the cycle, options, and settings that best fit
the load being washed. Always read and follow fabric care labels and laundry
product instructions. Avoid tightly packing the washer. The washer will not
rinse well or spin correctly if tightly packed. Not all settings are available
with each cycle, and some options cannot be used together. Not all options are
available on all models.
NOTE: Normal cycle is recommended for washing normally soiled cotton or
linen clothes. This clothes washer’s government energy certifications were
based on the Normal cycle with all wash temperature selections and water fill
levels offered in the cycle. It was tested as an Adaptive, Automatic Water
Fill Control System clothes washer. The settings as shipped are Regular +
Normal cycle, Warm Wash Temp and Auto Water level.
| Items to Wash: | Cycle: | Temperature: | Description: |
|---|---|---|---|
| Cottons, linens, and mixed-garment loads | Normal | Hot Very Warm Warm | |
| Cool Cold | This cycle runs on a Warm temperature and Fast spin speed for a |
Normal soil level.
Online Ordering Information
For detailed installation instruction and maintenance information, winter
storage, and transportation tips, please see the Owner’s Manual included with
your machine.
For information on any of the following items, a full cycle guide, warranty,
detailed product dimensions, or for complete instructions for use and
installation, please visit
https://www.whirlpool.com/owners, or
in Canada
https://www.whirlpool.ca/owners. This
may save you the cost of a service call.
However, if
you need to contact us, use the information listed below for the appropriate
region.
United States:
1-866-698-2538
Whirlpool Brand Home Appliances Customer eXperience Center 553 Benson Road
Benton Harbor, MI 49022-2692
Canada:
1-800-807-6777
Whirlpool Brand Home Appliances Customer eXperience Centre 200-6750 Century
Ave. Mississauga, Ontario L5N 0B7
IMPORTANT: Retain this guide for future use.
Designed to use only HE High Efficiency detergents.
Steam Clean (on some models)
The Steam Clean option adds additional soak and wash time to many cycles to
help remove tough stains, as well as a steam boost for added cleaning power.
An integrated heater helps to maintain optimal wash temperatures. See online
“Cycle Guide” for cycles that allow the Steam Clean option. You can also touch
and hold Steam Clean for 3 seconds to turn cycle signals on or off.
Extra Rinse
Activate this option to add an extra rinse to most cycles. You can also touch
and hold Extra Rinse for 3 seconds to disable/enable the Control Lock.
Wash & Dry (on some models)
Touch to add a drying cycle to your load after the wash cycle has finished.
The Wash & Dry option is designed to wash and dry small loads overnight. This
option is designed for 2-4 lightly soiled synthetic garments, athletic
uniforms, or workout wear. This option has an extra-high-speed spin followed
by intermittent tumbling and fan activation to circulate air through the
clothes.
IMPORTANT:
• Do not use dryer sheets.
• Do not dry comforters, towels, or large blankets.
FanFresh. (on some models) Touch and hold Wash & Dry for 3 seconds to
activate/deactivate the FanFresh€) option. Use the FanFrestip option if you
will be unable to remove the load promptly. The washer will automatically
activate the fan after the cycle ends and tumble the load periodically for up
to 12 hours. TumbleFresh”‘ (on some models) Touch to activate/deactivate the
TumbleFresh ni option. Use the TumbleFresh al option if you will be unable to
remove the load promptly. The washer will automatically tumble the load
periodically for up to 12 hours after the cycle ends. Load & Got” (on some
models) Touch to select this option If you want to automatically add HE
detergent to the wash load at the proper time. IMPORTANT: When using the
dispenser cartridge with concentrated liquid detergent, be sure to change the
detergent concentration settings in the control if the detergent used is
different than factory preset of 2x concentration. Change the detergent
concentration setting by touching and holding Temp and Soil for 3 seconds. You
can also touch and hold Load & Go”” for 3 seconds to set a presoak. PreSoak
(on some models) Touch to add a presoak time of your choice to a wash cycle.
W11355381B
W1135537713-5P
08/21
®/TM ©2021 Whirlpool. All rights reserved. Used under license in Canada. Tous
droits reserves. Utilise sous licence au Canada.