MATT BLATT MBCANRACGYA Candice Resting Chair User Guide
- June 6, 2024
- MATT BLATT
Table of Contents
CANDICE RESTING CHAIR
User Guide
MBCANRACBKA, MBCANRACBRA & MBCANRACGYA
SAFETY & WARNINGS
Read these instructions carefully and keep for future reference.
Refer to “components”, and ensure you have all items.
Before assembling, place all items on a soft, clean, and flat surface such as
a carpet to prevent scratches.
COMPONENTS
Parts
Hardware
ASSEMBLY
Step 1:
Attach the backrest (2) to the seat base (1) using 4 hex bolts (A), spring
washers (B), and flat washers (C).
Step 2:
- Attach the legs (4)(5)(6)(7) to the seat base (1) in the position shown below and secure in place using 8 hex bolts (A) and flat washers (C).
- Tighten the bolts to approximately 80%. Do not fully tighten.
Step 3:
Attach the 4 felt pads (El to the underside of the legs.
Step 4:
- Attach the headrest (3) to the backrest (2).
- Use the Allen key (D) to full tighten the bolts.
Step 5:
Complete!
NEED MORE INFORMATION?
We hope that this user guide has given you the assistance needed for a simple
setup. For the most up-to-date guide for your product, as well as any
additional assistance you may require, head online to
help.mattblatt.com.au.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>