MATT BLATT Amber Bench Stool Large User Guide
- June 6, 2024
- MATT BLATT
Table of Contents
**MATT BLATT Amber Bench Stool Large User Guide
**
COMPONENTS
- Stool cover (x1)
- Leg (x2)
- Leg (x2)
- Rack (x1)
-
A: (x4)
-
B: (x4)
-
C: (x4)
-
D: (x4)
-
E: (x4)
-
F: (x1)
-
G: (x4)
Hardware
- A: Dowel (x4)
- B: Split washer (x4)
- C: Washer (x4)
- D: Nut (x4)
- E: Screw (x4)
- F: Wrench (x1)
- G: Adhesive pad (x4)
ASSEMBLY
-
Step 1: Screw in the dowels (A) into the top of all legs (2 & 3).
A (x4)
-
Step 2:
-
Turn the stool cover over to expose the underside.
-
With the legs (2 & 3) standing dowel end facing down on the corners of the stool cover (1), place a washer (C) and split washer (B) all the way to the end of each dowel (A).
-
Put one nut (4) onto each dowel (A) and tighten using the wrench (F) until halfway down their length.
-
B (x4)
-
**C (x4)
**
-
**D (x4)
-
**
* **F (x1)
**
-
Step 3:
Align and insert the rack (4) into the holes of the legs (2 & 3) to secure it in
place.
-
Step 4:
Using the wrench (F), tighten the nuts (D) on the dowels (A) all the way down the dowel’s length until secure.
- F (x1)
- F (x1)
-
Step 5:
Insert and secure the screws (E) into the holes of the rack (4).
Then peel the adhesive pads (G) and attach them to the bottom of the legs (2 & 3).
-
E (x4)
-
G (x4)
-
-
Step 6:
Turn the bench stool right side up.
Customer Support
NEED MORE INFORMATION?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.mattblatt.com.au