Honeywell CT50 Charging Base And Netbase User Guide
- June 6, 2024
- Honeywell
Table of Contents
CT50/CT60 ChargeBase and NetBase
Models CT50-CB, CT50-NB
For CT50 and CT60 Mobile Computers
Quick Start Guide
Out of the Box
Make sure that your shipping box contains these items:
- CT50 ChargeBase (CT50-CB) or NetBase (CT50-NB)
- Power supply
- Power cord
- Quick start guide and regulatory compliance sheet
If any of these items are missing or appear damaged, contact your Customer Account Representative. Keep the original packaging in the event that you need to return the ChargeBase or NetBase for service or if you want to store the charger while not in use.
Caution: We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty. Mise en garde : Il est recommandé d’utiliser les périphériques, les cordons d’alimentation et les adaptateurs secteur conçus par Honeywell. L’utilisation de tout périphérique, cordon d’alimentation ou adaptateur secteur d’une autre marque est susceptible de provoquer des dommages non couverts par la garantie.
Connect Power
Use only a UL Listed power supply which has been qualified by Honeywell with an output rated at 12 V / 7 A. The power supply input rating is 90-264 VAC, 50/60 Hz. The operating temperature is -20 °C to 50 °C (-4 °F to 122 °F).
- Plug the power cord into the power supply.
- Plug the power supply cable into the power connector on the back of the charger.
- Plug the power cord into a standard wall outlet.
Charge the Battery Pack
Caution: Make sure that all components are dry prior to using the computers and batteries with accessories. Using wet components may cause damage not covered by the warranty.
- Insert one to four CT50s with battery packs inserted into the Charge
Base or NetBase.
Mount the ChargeBase or NetBase
You can mount the charger on a flat, horizontal surface such as a desktop or
workbench with an optional DIN rail.
Mounting hardware required:
- DIN rail
- 3/16-inch diameter x 5.8-inch long pan head screw
- 1/2-inch OD x 7/32-inch ID x 3/64-inch thick washer
- 3/16-inch diameter nut
- Slide the DIN rail into the slot on the bottom of the ChargeBase or NetBase.
- Secure the DIN rail to the flat surface with the hardware.
Agency Information
UL and C-UL Statement
UL and C-UL listed: UL 60950-1, Second Edition and CSA C22.2 No.60950-1-07,
Second Edition.
RCM Mark
Complies with ACMA regulatory arrangements.|
Customs Union Approval
USA
FCC Part 15 Subpart B Class B
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio or television technician for help.
If necessary, the user should consult the dealer or an experienced radio/ television technician for additional suggestions. Honeywell is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Honeywell. The correction is the responsibility of the user. Use only shielded data cables with this system. This unit has been tested with cables less than 3 meters. Cables greater than 3 meters may not meet class B performance. Caution: Any changes or modifications made to this equipment not expressly approved by Honeywell may void the FCC authorization to operate this equipment.
Canada
Industry Canada ICES-003
This Class B digital apparatus complies with Canadian ICES-003. Operation is
subject to the following conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Europe
The CE marking indicates compliance to 2014/30/EU EMC Directive with Standards
EN55032 CLASS B, EN55024, EN61000-3-2, EN61000-3-3. 2011/65/EU ROHS (Recast).
In addition, complies to 2014/35/EU Low Voltage Directive, when shipped with
recommended power supply.
European contact:
Honeywell Productivity Solutions BV
Lagelandseweg 70
6545 CG Nijmegen
The Netherlands
Honeywell International Inc. shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive.
Use only shielded data cables with this system. This unit has been tested with
cables less than 3 meters. Cables greater than 3 meters may not meet class B
performance. Certified to CB Scheme IEC 62368-1, Second Edition.
Refer to
www.honeywellaidc.com/environmental
for the RoHS / REACH / WEEE information.
Support
To search our knowledge base for a solution or log into the Technical Support portal and report a problem, go to www.hsmcontactsupport.com.
User Documentation
For the user guide and other documentation, go to www.honeywellaidc.com.
Limited Warranty
For warranty information, go to www.honeywellaidc.com and click Resources > Warranty.
Patents
For patent information, see www.hsmpats.com.
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in
specifications and other information contained in this document without prior
notice, and the reader should in all cases consult HII to determine whether
any such changes have been made. The information in this publication does not
represent a commitment on the part of HII. HII shall not be liable for
technical or editorial errors or omissions contained herein; nor for
incidental or consequential damages resulting from the furnishing,
performance, or use of this material. HII disclaims all responsibility for the
selection and use of software and/or hardware to achieve intended results.
This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated into another language without the prior written
consent of HII.
Copyright © 2015-2020 Honeywell International Inc. All rights reserved.
CT50-CNB-MULT-QS Rev C
11/20
References
- Industrial Automation | Honeywell
- Safety and Productivity Solutions | Honeywell
- Safety and Productivity Solutions | Honeywell
- Safety and Productivity Solutions | Honeywell
- Productivity products and associated patents | Honeywell
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>