BRAUN MQ9037X Electric Hand Blender Instruction Manual

: June 6, 2024
: Braun

BRAUN MQ9037X Electric Hand Blender Instruction Manual

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and/or injury to persons, including the following:

READ ALL INSTRUCTIONS.

Blades are sharp. Handle carefully when removing, inserting or cleaning. Exercise the same care when removing, inserting the chopping blade or disc for the food processor and chopper accessories. Always verify that the accessory enclosure is free of cracks or other damages.
The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the appliance by a person responsible for their safety.
Remove any packaging materials and promotional labels before using the appliance for the first time.
Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. To unplug, grasp plug and pull from electrical outlet. Never pull cord.
To protect against electrical shock, do not put the motor body, cord or electrical plug of this hand blender in water or other liquids. Only the detachable blending shaft and other certain parts of this appliance have been designed for immersion into water or other liquids. Never submerge any other part of this unit. If hand blender falls into liquid, unplug first, then remove immediately. Do not reach into the liquid without unplugging the unit first.
The use of attachments/accessories not sold or recommended by Braun may cause fire, electrical shock or risk of injuries to persons.
Regularly inspect the power cord, power plug and actual appliance for any damage. Do not operate if damaged in any way or after the appliance malfunctions. Immediately cease use of the appliance and call Braun Customer Service for examination, repair or adjustment.
Avoid any contact with blades or moveable parts.
Do not use outdoors or for anything other than its intended purpose.
Keep hands and utensils out of the container while blending to prevent the possibility of severe injury to persons or damage to the unit. A scraper may be used, but must be used only when the unit is not running.
Detach blending shaft from the motor body before washing the blades or shaft.
When mixing liquids, especially hot liquids, use a tall container or make small quantities at a time to reduce spillage, splattering and possibility of injury from burning.
The metal blending shaft and whisk may scratch or mark non-stick coatings. Do not use in non-stick cookware.
Be certain the food processor attachment cover is securely locked in place before operating appliance. Do not attempt to remove cover until blade has stopped rotating.
Check work bowl for presence of foreign objects before using.
Do not let any cord hang over the edge of the table or counter. Do not let cord contact hot surfaces, including stovetop.
Maximum rating is based on the «bf» chopper (MQ 20 chopper «hc» + adapter) that draws the greatest power and other recommended attachments may draw significantly less power.
The bf chopper is intended for processing small quantities of food for immediate consumption, and is especially recommended for preparing baby food. The appliance is not intended to prepare large quantities of food at one time.
Double-blade knife is sharp. Handle carefully. Use extreme care when removing or replacing knife blade.
Bowl must be in place before replacing knife blades.
Do not operate your appliance in an appliance garage or under a wall cabinet.
We suggest you save all packing materials in the event that future shipping of the machine is needed. Keep all plastic bags away from children.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Do not modify the plug in any way.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

WARNING: RISK OF FIRE OR ELECTRIC SHOCK

Overview

Installation Instruction

__

| | Parmesan
| | | | | |
---|---|---|---|---|---|---|---|---
Knife Icon |
1cm
0.4 inch|
1cm
0.4 inch|

__

| | | |

__

|

__

max.| 200g
7 oz| 200g
7 oz| 30g
1 oz| 200g
7 oz| 20| 200g
7 oz| 200g
7 oz| 200g
7 oz
speed| | Signal Icon

How to use

Our products are engineered to meet the highest standards of quality, functionality and design. We hope you thoroughly enjoy your new Braun appliance.

Before use

Please read instructions carefully and completely before using the appliance.

Parts and Accessories

Pilot light
Safety button
Smart Speed switch / variable speeds
Motor part
Easy Click Plus Release buttons
Active Blade shaft
Beaker
Whisk accessory
a Gearbox
b Whisk
Puree accessory
a Gearbox
b Puree shaft
c Paddle
2-cup / 500 ml chopper accessory «ca»
a Lid (with gear)
b Chopping blade
c Chopper bowl
d Anti-slip rubber ring

Clean all parts before using for the first time – refer to «Care and Cleaning».

Pilot Light

The pilot light (1) shows the status of the appliance, when it is connected to an electrical outlet.

Pilot light

|

Appliance / Operating status

---|---
Flashing red| Appliance is ready for use.
Solid green| Appliance is released (switch release button is pressed) and can be switched on.
Solid Red| Early warning about overheating. Motor slows down, step by step, till shut off. Let the device cool down. It is ready for use again when the pilot light flashes red.

If the maximum speed decreases under high load and long running time you can still finish your preparation, however you should let the appliance cool down afterwards.

How to Use the Appliance

Smart Speed Switch for Variable Speeds

One squeeze, all speeds. The more you press, the higher the speed. The higher the speed, the faster and finer the blending and chopping results.

One handed operation: the Smart Speed switch (3) allows you to turn on the appliance and control the speed with one hand.

Operating your Hand Blender
First use: Remove the transportation lock from the motor part (4) by pulling it at the red strap.

Switching On (A)

The appliance comes equipped with a safety button for releasing the Smart Speed switch. To safely turn it on, follow these points:

Press the safety button (2) with your thumb. The Pilot Light will turn solid green.
Immediately press the Smart Speed switch and adjust to the desired speed. Note: If the Smart Speed switch is not pressed within 2 seconds, the appliance cannot be switched on for safety reasons. The pilot light will flash red. To switch the appliance on, start again with first step.
During operation you do not need to keep the safety button pressed.

ActiveBlade Shaft (B)

The hand blender is equipped with an ActiveBlade shaft, which enables the knife extend to the bottom of the bell. The adjustment is made automatically by pressure required in blending tasks, especially suited to mix hard foods e.g raw fruits and vegetables.
It is also perfectly suited for preparing dips, sauces, salad dressings, soups, baby food, as well as drinks, smoothies and milkshakes.
For best results, use the highest speed.

Assembly and Operation

Attach the ActiveBlade shaft (6) to the motor part until it clicks.
Place the ActiveBlade shaft into the mixture to be blended. Then switch the appliance on as described above.
Blend ingredients to the desired consistency using a gentle up-and-down motion. Depending on the pressure applied, the ActiveBlade shaft will depress and blade will extend.
After use, unplug the hand blender and press the release buttons (5) to detach the ActiveBlade shaft.

Caution

For easier cleaning, liquids or ingredients should not overlap the green line of the ActiveBlade shaft.
If using the appliance to purée hot food in a saucepan or pot, remove the saucepan or pot from the heat source and ensure the liquid is not boiling. Allow hot food to cool slightly to avoid risk of scalding.
Do not let the hand blender sit in a hot pan on the cooktop when not in use.
Do not scratch the ActiveBlade Shaft over the bottom of pans and pots.

Recipe Example: Mayonnaise

1.25 cups / 250 g oil (e.g. sunflower oil),
1 egg and 1 extra egg yolk,
1–2 tbsp. vinegar,
Salt and pepper to taste

Place all ingredients (at room temperature) into the beaker in the order as above.
Place the hand blender at the bottom of the beaker. Blend at maximum speed until the oil starts emulsifying.
With the hand blender still running, slowly raise the shaft to the top of the mixture and back down to incorporate the rest of the oil. NOTE: Processing time: approx. 1 minute for salads and up to 2 minutes for a thicker mayonnaise (e.g. for dip).

Whisk Accessory (B)

Use the whisk only for whipping cream, beating egg whites, making sponge cakes and ready-mix desserts.

Assembly and Operation

Attach the whisk (8b) to the gearbox (8a).
Align the motor part with the assembled whisk attachment and push the pieces together until they click.
After use, unplug and press the release buttons to detach the motor part. Then pull the whisk out of the gearbox.

Tips for Best Results

Move the whisk clockwise while holding it at a slight incline.
To prevent splattering, start slowly and use the whisk attachment in deep containers or pans.
Place the whisk in a bowl and only then switch the appliance on.
Always ensure the whisk and mixing bowl are completely clean and free of fat before whisking egg whites. Only whip up to 4 egg whites.

Recipe Example: Whipped Cream

1.8 cups / 400 ml chilled cream (min. 30% fat content, 4 – 8 °C) / 39,2 – 46,4 F)

Start with low speed (light pressure on the switch) and increase the speed (more pressure on switch) while whipping.
Always use fresh chilled cream to achieve greater and more stable volume when whisking.

Puree Accessory (C)

The puree accessory can be used to mash cooked vegetables and fruits such as potatoes, sweet potatoes, tomatoes, plums and apples.

Before Use

Do not mash hard or uncooked food, as this may damage the unit.
Peel and remove any stones or hard parts; cook and drain then mash the fruit/vegetable.

Assembly and Operation

Fit the gearbox (9a) to the shaft (9b) by turning in a clockwise direction until it locks into place.
Turn the puree accessory upside down and fit the paddle (9c) over the central hub and turn counter- clockwise to locate. (If the gearbox is not fitted properly, then the paddle will not secure in place).
Align the assembled puree accessory with the motor body part and click the two parts together. Plug in.
Dip the puree accessory into the ingredients and switch on the appliance.
Using a gentle up and down motion, move the puree accessory through the ingredients until the desired texture is achieved.
Release the Smart Speed switch and ensure the puree accessory has completely stopped turning before removing it from the food.
After use, unplug the appliance. Remove the paddle (9c) by turning clockwise.
Press the release buttons to detach the puree accessory from the motor part. Separate the gearbox from the shaft by turning counterclockwise.

Caution

Never use the puree accessory in a saucepan over direct heat.
Always remove the saucepan from the heat and allow to cool slightly.
Sit the saucepan or bowl on a stable, flat surface, and support it with your free hand.
Do not tap the puree accessory on the side of the cooking vessel during or after use. Use a spatula to scrape excess food away.
For best results when mashing never fill a saucepan or bowl more than half full with food.
Do not process more than one batch without interruption.
Let the appliance cool down for 4 minutes before you continue processing.

Recipe Example: Mashed Potatoes
2.2 lbs / 1 kg cooked potatoes
7 fl. oz. / 200 ml warm milk

Place the potatoes in a bowl and mash for 30 seconds (3/4 way on the Smart Speed switch)
Add the milk. Resume mashing for another 30 seconds.

Chopper Accessory (D)

The «ca» chopper (10) is perfectly suited for chopping meat, hard cheese, onions, herbs, garlic, vegetables, bread, crackers and nuts.

For best results of hard food processing fill the container with max. 200 g (7 oz). Not suitable for liquids.

Refer to the Processing Guide D for maximum quantities and recommended speeds.

Before Use

Pre-cut foods into small pieces for easier chopping.
Remove any bones, tendons and gristle from meat to help prevent damage to the blades.
Make sure the anti-slip rubber ring (10d) is attached to the bottom of the chopper bowl.

Assembly and Operation

Carefully remove the plastic cover from the blade.
The blade (10b) is very sharp! Always hold it by the upper plastic part and handle it carefully.
Place the blade on the center pin of the chopper bowl (10c). Press it down and give it a turn so that it locks into place.
Fill the chopper with food and put on the lid (10a).
Align the chopper with the motor part (4) and click together.
To operate the chopper, switch on the appliance. During processing, hold the motor part with one hand and the chopper bowl with the other.
Always chop harder foods (e.g. parmesan cheese) at full speed.
When chopping is complete, unplug and press the release buttons (5) to detach the motor part.
Lift the lid up. Carefully take out the blade before pouring out the contents of the bowl. To remove the blade, slightly turn it then pull it off.

Caution

Do not use the chopper attachment to process extremely hard foods, such as unshelled nuts, ice cubes, coffee beans, grains, or hard spices e.g. nutmeg. Processing these foods could damage the blades.
Never place the chopper bowl in the microwave oven.

Care and Cleaning (E)

Always clean the hand blender thoroughly after use.
Unplug hand blender before cleaning.
Do not immerse the motor part (4) or gearboxes (8a, 9a) in water or any other liquid. Clean with a damp cloth only.
All other parts can be cleaned in a dishwasher. Do not use abrasive cleaners that could scratch the surface.
You may remove the anti-slip rubber rings from the bottom of the bowls for an extra thorough clean.
When processing foods with high pigment content (e.g. carrots), the accessories may become discolored. Wipe these parts with vegetable oil before cleaning them.

Both the design specifications and these user instructions are subject to change without notice.

Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.