electro-harmonix NEOMIS Neo Mistress Compact Phaser/Flanger User Manual
- June 6, 2024
- electro-harmonix
Table of Contents
NEO MISTRESS
Compact Flanger
Congratulations on your purchase of the Electro-Harmonix NEO MISTRESS! The NEO MISTRESS is a compact, battery-operated Flanger effects pedal with Filter Matrix mode. Though simple to use, a plethora of different sounds are available from the Neo Mistress’ two knobs: RATE and FEEDBACK. Each knob sweeps through a wide range of functionality; please read the description below for each knob to obtain a complete understanding of their abilities. The Neo Mistress is true bypass.
CONTROLS
RATE KNOB -
controls the speed or rate of the LFO signal that modulates the Flanger. As you turn the RATE knob up, or clockwise, the speed of the effect will increase. When the RATE knob is turned down below the 11 o’clock position (marked by a star near the knob), the Neo Mistress enters Filter Matrix mode. In Filter Matrix mode the LFO is disconnected from the Flanger so that the Flanger is no longer modulated by the Neo Mistress’ internal modulation. Turning the RATE knob from full counter-clockwise to the star symbol allows manual modulation of the Flanger’s position. You can also fix the Flanger to one setting and, working in conjunction with the FEEDBACK knob, achieve resonant bell tones, steel drum effects, and other unique sounds. Turn the RATE knob above the 11 o’clock position (marked by the star) to exit Filter Matrix Mode and return to LFO modulation.
FEEDBACK KNOB-
controls the “color” or “resonance” of the Flanger effect. As the knob is turned up, the “depth” or “width” of the LFO is also increased to make the effect even more pronounced. Above the 3 o’clock position, the FEEDBACK knob pushes the Flanger very close to self-oscillation, creating additional harmonics as it sweeps through the effect’s range.
FOOTSWITCH and STATUS LE D –
Use the footswitch to toggle between bypass and effect modes. The Status LED will be off while in True Bypass mode. The LED lights up upon engaging Effect mode with the footswitch. In Effect mode, the LED’s color changes with the position of the Flanger: in the bass range of the Flanger’s sweep, the LED is red; the LED is green in the treble range of the sweep; in between, the LED is orange.
I/O
INPUT JACK-
Connect the output of your instrument or another effects pedal to this jack.
The input impedance presented at the INPUT jack is 1 M.
AMP JACK Connect the AMP jack to your amplifier input or the input of
another effects pedal. The output impedance at this jack is 1150.
9V Power Jack The NEO MISTRESS can run off of a 9V battery or you can
connect a 9VDC battery eliminator capable of delivering at least 100mA to the
9V power jack. The optional 9V power supply from Electro-Harmonix is 9.6DC-
200BI (same as used by Boss® & Ibanez®) 9.6 Volts DC 200mA. The power supply
must have a barrel connector with a center-negative plug. The battery may be
left in or taken out when using a power supply. The current draw for the NEO
MISTRESS is 30mA.
– WARRANTY INFORMATION –
Please register online at http://www.ehx.com/product-registration or
complete and return the enclosed warranty card within 10 days of purchase.
Electro-Harmonix will repair or replace, at its discretion, a product that
fails to operate due to defects in materials or workmanship for a period of
one year from date of purchase. This applies only to original purchasers who
have bought their product from an authorized Electro-Harmonix retailer.
Repaired or replaced units will then be warranted for the unexpired portion of
the original warranty term.
If you should need to return your unit for service within the warranty period,
please contact the appropriate office listed below. Customers outside the
regions listed below, please contact EHX Customer Service for information on
warranty repairs at info@ehx.com or
+1-718-937-8300. USA and Canadian
customers: please obtain a Return Authorization Number (RA#) from EHX
Customer Service before returning your product. Include with your returned
unit: a written description of the problem as well as your name, address,
telephone number, e-mail address, and RA#; and a copy of your receipt clearly
showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
47-50 33RD STREET
LONG ISLAND CITY, NY 11101
Tel: 718-937-8300
Email: info@ehx.com
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email:
electroharmonixuk@virginmedia.com
This warranty gives a purchaser specific legal rights. A purchaser may have
even greater rights depending upon the laws of the jurisdiction within which
the product was purchased.
To hear demos on all EHX pedals visit us on the web at
www.ehx.com Email us at
info@ehx.com
– FCC COMPLIANCE –
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. If the device is
not installed and used in accordance with the instructions, it may cause
harmful interference to radio communications and void the user’s authority to
guarantee the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment under FCC rules.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>