electro-harmonix 219381 Worm Analog Modulation Multi-Effects Pedal User Manual
- June 6, 2024
- electro-harmonix
Table of Contents
The Worm
Analog Modulation Pedal
Congratulations on your purchase of The Worm , a multi-functional modulation pedal. The Worm is four analog effects in one: Modulated Wah, Phaser, Tremolo, and Vibrato.
-AC ADAPTOR-
Your Worm comes equipped with a 24 volt DC (inner positive) / 100mA external
power adapter. Use only the power adapter that is supplied! Using the wrong
adapter can ause
serious bodily injury and may damage your unit. This will void the warranty.
**– CONTROLS –
**
MODE Rotary Switch – Selects between the four different types of effects:
WAH, PHASER, TREMOLO, and VIBRATO.
RANGE Knob – Adjusts the amount of effect that will be applied to your
signal. As the RANGE knob is turned from the Counter-Clockwise (minimum)
position to the clockwise (maximum) position, the intensity of the effect will
increase.
RATE Knob – Adjusts the speed of modulation for the effect. As the
RATE knob is turned from the Counter-Clockwise (minimum) position to the
clockwise (maximum) position, the speed of the effect will go from slow to
fast.
AUTO / MANUAL/EXP Toggle Switch – Set this switch to AUTO mode for normal
modulation use. When this switch is set to MANUAL/EXP mode, the internal
modulation waveform is disconnected from the circuit and the RANGE knob will
sweep through the effect. In addition, while in ANUAL/EXP mode, you can
connect an expression pedal or control voltage (between 0 – 5V only) to the
EXP. PEDAL jack and use the expression pedal to sweep the effects.
STATUS LED and FOOTSWITCH – If the effect is engaged, the LED will blink
at the same rate that the effect modulates. If the LED is off, The Worm is in
True Bypass mode. The footswitch engages/disengages the effect.
– JACKS –
INPUT Jack – Connect your instrument to this jack. The input impedance
present at this jack is 300 k .
OUTPUT Jack – Connect this jack to your amp or next effects pedal. The
output impedance present at this jack is 1 k .
EXP. PEDAL Jack – Connect an Expression Pedal to this jack or the output
from a Control Voltage generator. The expression pedal must have a TRS plug
attached to it with the tip attached to the pedal’s wiper. The control voltage
must be between 0V and 5V. The input impedance present at this jack is 100 k .
Acceptable expression pedals include M-Audio EX-P, Moog Expression Pedal,
Roland EV-5, and Boss FV-500L.
24V PWR Jack – Connect the output lug from the supplied 24VDC/100mA wall
wart to the 24V PWR jack at the top of The Worm. Please use only the AC
Adapter that came supplied with the Worm. The Worm does not accept batteries.
**– WARRANTY INFORMATION –
**
Please register online at http://www.ehx.com/product-registration or complete
and return the enclosed warranty card within 10 days of purchase.
lectroHarmonix will repair or replace, at its discretion, a product that
fails to operate due to defects in materials or workmanship for a period of
one year from the date of purchase. his applies only to original purchasers
who have bought their product from an authorized Electro-Harmonix retailer.
Repaired or replaced units will then be warranted for the unexpired portion of
the original warranty term.
If you should need to return your unit for service within the warranty period,
please contact the appropriate office listed below. Customers outside the
regions listed below, please contact EHX Customer Service for information on
warranty repairs at info@ehx.com or
+1-718-937-8300. USA and Canadian
customers: please obtain a Return Authorization Number (RA#) from EHX
Customer Service before returning your product. Include with your returned
unit: a written description of the problem as well as your name, address,
telephone number, email address, and RA#; and a copy of your receipt clearly
showing the purchase date.
**United States & Canada
**
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
47-50 33RD STREET
LONG ISLAND CITY, NY 11101
Tel: 718-937-8300
Email: info@ehx.com
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email:
electroharmonixuk@virginmedia.com
This warranty gives a purchaser specific legal rights. A purchaser may have
even greater rights depending upon the laws of the jurisdiction within which
the product was purchased.
To hear demos on all EHX pedals visit us on the web at
www.ehx.com
Email us at info@ehx.com
– FCC COMPLIANCE –
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. If the device is
not installed and used in accordance with the instructions, it may cause
harmful interference to radio communications and void the user’s authority to
guarantee the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
were redesigned to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment under FCC rules.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>