WGP B092QVC1QL Vooni Portable Folding Fan User Manual
- June 6, 2024
- WGP
Table of Contents
WGP B092QVC1QL Vooni Portable Folding Fan User Manual
Product Specification
- Foldable and portable fan with 4 speed modes
- Adjustable angle of 180°
- Adjustable height, approx. 35-97.5 cm
- Battery capacity: 3.7V 7200mAh Lithium battery
- Working time: 5~24 hours (depending on speed mode)
- Charging time: 4.5 hours (USB cable for charging included)
- Charging voltage: DC 5V/2A
- Output power: 1.3-4.8W
- Noise decibel: 30-40 dB
- Working wind speed: 2.3~4.0m/s
- Measurements, fully extended: 19.7 x 19.7 x 97.5 cm
- Measurements, folded: 19.7 x 19.7 x 9.3 cm
- Weight: 945 grams
- Material: ABS
- Package contains: foldable fan, USB cable, user manual
Product Parts
Caution
- Do not use while charging.
- Long-term use of this product can cause motor heating, be observant and do not leave the fan on for several hours unattended.
- To prevent it from falling, do not place this product on any uneven surfaces.
- Do not use the power supply beyond the product load as this might cause the product to over-heat and the circuit board burning out.
- Do not disassemble or modify this product by yourself.
- Do not damage, hit or throw this product.
- Do not place the product in a cool, humid place.
- Keep away from fire.
- Keep away from water and other liquids.
- Warning: This is not a toy, and not suitable for children under 3 years old to use.
Operations
-
When folded, unfold the fan upwards as the “OPEN” arrow indicates.
-
Continue to unfold in arrow directions.
-
When unfolded, adjust the angle to 90° vertically and rotate clockwise to securely lock the telescopic rod
-
The fan head can be turned 180° to adjust wind directions.
-
Single click to indicate power, double click to turn On. Then single click for switching between the four different speed modes.
-
The height of the fan can be adjusted, by gently pulling the telescopic rod to raise it during use. Make sure to lock it in its new position as shown in step 3.
-
To fold: turn power Off. Rotate counterclockwise to unlock the handle unit.
-
Then retract the telescopic rod to its original position and press the fan head lightly until fully folded at the fan base.
-
To remove the fan cover: Hold the fan, lightly press at the cover edge and rotate counter-clockwise with your hands until you can lift it off.
-
The fan cover can be removed for cleaning the fan. Use a dry cloth, never expose the fan to water.
-
Install the dried fan cover: Hold the fan, lightly press the cover edge and rotate clockwise with your hands, it is installed back.
-
To charge: locate the USB port, and use the included Micro USB cable, then connect it to a standard USB charger (DC 5V).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>