MAT-TUNER mAT-705 Automatic Antenna Tuner Instructions
- June 6, 2024
- MAT-TUNER
Table of Contents
mAT-705
Automatic Antenna Tuner
For the ICOM IC-705 transceiver
HENGSHUI MAT-TUNER LLC
http://www.mat-tuner.com
http://www.mat-tuner.cn
Automatic Antenna Tuner
mAT-705Plus
User Instructions
Thank you for your purchase of the model mAT-705 Automatic Antenna Tuner,
designed specifically for the ICOM IC-705 HF/VHF/UHF Transceiver. The mAT-705
tuner is powered by two built-in lithium batteries, can be charged by a USB
power adapter.
Magnetic latching relays are used inside the tuner to save energy.
The mAT-705 Automatic Antenna Tuner responds to control commands from the
IC-705 Transceiver, providing microprocessor-based impedance matching on the
160 through 6-meter Amateur bands. On the HF and 50 MHz bands the impedance
matching range is from 5Ω to 1500Ω.
The tuner comes with a control cable. Both ends of the control cable are
standard 3.5mm plugs. One side is connected to the TUNER socket of the
transmitter, and the other plug is connected to the CON socket of the tuner.
The transceiver controls the tuner through this cable for automatic tuning.
An RF cable mAT- RC1 that connects the IC-705 and the tuner is sold as an
accessory item. mAT-RC1 is a common coaxial cable with male BNC plugs at both
ends.
Front Panel Information
Back Panel Information
Charging instructions
- Two built-in 10440 lithium batteries, 3.7V,1000mAh.
- TYPE-C USB charger.
- The charging current is 500mA, complete charging in about 1 hour.
- The highest charging voltage is 5.5V.
☆ The “PWR/CHARGE” green indicator flashes when the tuner starts, which means
the tuner needs to be charged.
☆ The “PWR / CHARGE” red indicator light is on while charging. The red
indicator light will go out after the battery is fully charged.
Operating
☆ The mAT-705 tuner has no mechanical power switch. Its startup and shutdown
are controlled by the IC-705 transmitter, which turns on and off along with
the transmitter.
☆ Before use, make sure that the control cable and RF cable are properly
connected. Pay attention to whether the control cable has been inserted in
enough places.
☆ When the transmitter is operating in the 144 or 430MHz band, it is
recommended that you remove the tuner. Otherwise, the tuner may affect the
impedance of your antenna system.
◆ Turn on the power of the IC-705 transmitter, the “PWR/CHARGE” of the mAT-705 power of the IC-705 tuner will automatically light up in green. If this indicator flashes, it means the tuner needs to be charged.
Start tuning cycle method A:
- Enter the function menu of the transmitter, as shown in the figure, the [TUNER] option turns white to indicate that it is available.
- Quickly touch [TUNER] to switch the tuner to “BYPASS”. Touch for more than 1 second to start tuning and set the tuner to “ONLINE”.
☆ When the tuner is tuning, in addition to the “ONLINE/TUNING” indicator
lighting up in red, the red text “TUNE” will flash on the transmitter screen.
☆ After the tuner completes the tuning cycle, when it is online, the white
text “TUNE” will always be lit on the transmitter screen, except for the
“ONLINE/TUNING” indicator on the front panel that lights up green.
Start tuning cycle method B:
☆ When PTT is pressed for the first time on a new frequency, the tuner will
automatically start a new tuning cycle.
☆ The “PTT TUNE” function of the IC-705 transmitter is turned on by default.
If you turn off this function, you will not be able to drive the tuning cycle
by this method.
Specifications
Frequency Range: 1.8 ~ 54 MHz
Impedance Range: 5 ~1500 Ω
Tune Time: 5 seconds or less
Memories: 16000 channels
Charging Voltage: 4.5-5.5V, TYPE-C USB
Charging Current: 500mA, Max 700mA
Operating Temperature: -10°C ~ +50°C
Case Size(WHD): 67 x 29 x 151 mm
Net Weight: 237g, Gross weight: 330g
Supplied Accessories
Control Cable 1pc
TYPE-C USB charging cable 1pc
◆ Tip: mAT-705 has two built-in lithium batteries, which may be restricted during transportation. Please comply with relevant laws and requirements.
HENGSHUI MAT-TUNER LLC
www.mat-tuner.com
No.28 Ronghuabei ST, Hengshui, Hebei, CHINA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>