Nakamichi 6.2″ 2-DIN AV Receiver User Manual

Nakamichi 6.2″ 2-DIN AV Receiver

YOUR AV RECEIVER
Dear Customer,
Congratulations on purchasing our Nakamichi mobile system product for your sound system.
This product has been designed and manufactured to Nakamichi’s exacting standards to ensure many years of audio enjoyment. For the best performance, we recommend that you have your Nakamichi product installed by an authorized Nakamichi dealer. If you would like to install this product on your own, we recommend for you to go through this manual to familiarize yourself with all the installation requirements and procedures. If you encounter any issues or if you have any questions on the operation of this product, please contact your nearest authorized Nakamichi dealer for assistance, or you may also contact us through our website or social media channels.

Installation of your Product

In today’s modern vehicles, it is very easy to cause damage to existing systems through improper installation, Please follow and scrutinize all wiring diagrams to ensure that you have connected everything in its proper place, If you find yourself uncomfortable of unfamiliar with understanding the wiring and installation diagrams or testing instructions, do contact your nearest Nakamichi dealer to perform the installation for you.

Safety Warnings and Considerations

• Clean only with a dry cloth or other similar materials.
• Install your product in a dry, well-ventilated location that does not interfere with your vehicle’s safety equipment.
• Do not block any ventilation openings when installing this product.
• Do not mount the product in the engine compartment of your vehicle or in any areas of extreme heat such as mufflers, silencers, exhaust pipes or other heat producing apparatus.
• Securely mount the product so that it does not come loose in the event of a collision or as a result of repeated vibrations that might occur during normal operation.
• Installation of the apparatus must be done with great care to prevent damage to your vehicle’s fuel lines, power, and other electrical wiring, hydraulic brake lines, and other systems. If possible, always visit your nearest Nakamichi dealer to perform the installation.
• Do not run any wiring outside or underneath the vehicle. Keep all wires inside the vehicle.
• Take the necessary precautions when making connections to the vehicle’s battery to avoid any potential shock.
• Protect all system wires from sharp edges by carefully routing them, always use rubber grommets to protect wiring and cables whenever you are installing them through metal openings.
• Secure all wiring using cable ties or wire clamps to protect them from moving parts and sharp edges.
• This apparatus shall not be exposed to dripping or splashing, and no object filled with liquids, shall be placed on the apparatus.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power input terminals are damaged, liquidhas been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• Fuses shall be replaced only with the correct type and fuse value, and only when the apparatus is powered off.
• Exposure to high sound pressure levels may lead to permanent hearing loss. Take every precaution to protect your hearing.
• This product is designed specifically for use with 12 volt, negative- ground electrical systems only. Using this product in systems with positive ground and/or voltages other than 12V may result in damage to the product and your system.

Warranty Considerations

Nakamichi warrants this product to be free of defects in materials and workmanship for a period stated by your country’s authorized Nakamichi distributor. This warranty is not transferable and applies only to the original owner who has purchased from an authorized Nakamichi dealer or distributor. Damage caused by the following is not covered under warranty: accident, misuse, abuse, product modification or neglect, failure to follow installation instructions, unauthorized repair attempts, misrepresentations by the seller. This warranty does not cover incidental or consequential damages and does not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to accident or normal wear and tear is not covered under warranty. Warranty is void if the product’s serial number has been removed or defaced.

FCC NOTES
WARNING!
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

FCC ID: 2ATJSADF28689111
This device complies with Part 15 of the FCC Rules. Operation is subject lo the following two conditions: ( l) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

SPECIFICATION

General
Operation Voltage: l 4.4V{l 0.5-l 6V) Installation Size: l 78xl OOxl 52MM Operation Temperature: -10°C – +70°C Storage Temperature: -20°C – +80°C Net Weight: 1.92KG

Disc Playback Item
Disc Format: DVD/ VCD/ CD/
CD-R/CD- RW/ DVD+R/DVD+RW
Disc Diameter: 12CM
Frequency Response: 20HZ – 20KHZ Signal/Noise Ratio: >60DB
Total Harmonic Distortion: <0.3% Channel !solution: >50DB
Video Signal Format: NTSC/PAL
Video Output: 1 +/-0.2VP-P

Radio Item
FM Frequency Range: 87.5-108.0MHZ AM Frequency Range: 522-l 620KHZ

Blueloolh Item
Communication system: BT 4.0 version+EDR
Output: BT standard power 2 class Max communication range: 5m Frequency band: 2.4GHz
Compatible Bluetooth protocol: HFP/ HSP/ A2DP/ AVRCP

TFT Screen Item
Size: 6.2 inch
Resolution: 800×480 RGB Contrast ratio: 500

Video Item
External video input system: NTSC/PAL/SECAM
External video input: lVP-P/750

Audio Item
Max power: 4X50W
Pre-output{V): 2V /1 OKO
Pre-output impedance: 56000 Speakers impedance: 4-80

USB Item
Front USB: Read
Rear USB: Charger{5V /1 A)

Support Video Formal
H264/ DIVX/ FLY/ MKV / MPEG4
Support Video Solution 640×480/ l 280×720/ l 920xl 080

Support Audio Format
MP3/ WMA/ FLAC

Note:
Specification and design; functions and features; unit illumination; colour and display segment are subject to change without prior notice. Photos and drawings on gift box or operation manual might be varied from the exact unit. Depends on the input devices operation might be varied from the operation manual described.

WIRING CONNECTION

ACCESSORY LIST
Check and identify the contents of your package:

1. AV Receiver x 1 pc
2. Power Cable x 1 pc
3. Remote Control x 1 pc
4. Half Sleeve x 1 pc
5. USB Cable x 1 pc
6. User Manual x 1 pc

FRONT PANEL

FUNCTION               OPERATIONS & CONTROLS 

1. Disc Key A          Short press to take out/input disc.
2. MENU                Press to enter main menu.
3. Power                  Under any state, press this button to power on/off the device.
4. Volume+            Short press to increase volume. long press to increase volume continuously.
5. Volume –            Short press to decrease volume. long press to decrease volume continuously.

REMOTE CONTROL

Battery Replacement
Refer to the back of remote handset for details on how to replace the battery. Replace the battery only with the same or equivalent type.
Note : If the remote handset will not be used for a long time, please remove the battery from the battery compartment.

REMOTE CONTROL

1. Touch it can return to main menu.

2. Touch it can search stations automatically.

3. Touch it can open/close LOC function.

4. Touch it, press to scan reserved station and save the strongest signal station in the menu.

5. Touch it can open/close stereo.

6. Touch it can search to low frequency stations. Long press to low frequency search automatically.

7. Touch it can search to high frequency stations. Long press to high frequency search automatically.
   Disc play: Hold fhe disc printing side on, insert info disc slot, after system detects the disc, AV receiver will automatically intake disc and play. Take out Disc
   Touch A to take out disc. If in 1 Os, disc has not been removed, system will intake disc again but not automatically play.
   Attention : do not insert 2 or more discs one time.
   Touch Disc from main menu to enter disc menu:

8. Chapter selection

9. short press last song; long press fast backward

10. play/ pause

11. short press next song long; press fast forward

12. stop

Attention:
when disc stuck caused by using disc incorrectly or wrong operation. please long press A for 3s, AV receiver’s mechanism will automatically reset and return to normal.

FUNCTIONS APPLICATION

Settings operation
Touch “Setting” icon from main menu to enter below picture
System setting

Area : Click the options can choose the different regions.
Language : Touch [Language]icon enter language setting interface, select the needed language,
F-CAM: Click Iicon can open/close corresponding functions.
Sound Setting: Touch icon enter sound setting interface
EQ : Click the options can switch
EQ modes: Rock/Classical/Jazz/efc, menu to enter below picture
Field : Touch icon enter below menu.

Display selling
Touch icon enfer display setting interface:  Click opfions can choose settings.

Media selling
Touch icon enter media setting interface: Click options can choose settings like audio, language, subtitles, etc

BT selling: Touch icon enter BT setting inferface: Click options can choose settings.

Time setting
Touch icon enter time setting interface. Click options can choose settings.

Light setting
Touch icon enter light setting interface. Click options can choose settings.

Phone link
Touch “Phone link” in main menu to enter Phone link interface.

COMMON TROUBLE-SHOOTING

penpoint, then, power on
After ignition switch off, setting information all lose| Change battery or fuse| Reset information and save
Poor performance of radio station| Weak signal| Move the car to another place, then research
Can not load disk| There is a disc inside| Remove disc before inserting

another one

Can not play disc| Disc is scratched| Change new disc
Put wrong side of disc into the unit| Slot in the disc with sign side up
Lens has dirt| Clean lens by lens clean disc
Can not switch language/subtitle| There is only one language/ sub title in disc| If disc is not with multilanguage/ subtitle, it cannot switch language/ subtitle
No image| Other factors cause MPU wrong operation| Press RES button on the panel by penpoint, then, power on
Can not watch image during driving| It’s not allowed to watch image during driving| Park the car in a safe place, put the car stall in “P” position, pull up the hand brake, parking brakewire must be grounded .

SCAN OUR QR CODE OR VISIT WWW.NAKAMICHICARAUDIO.COM FOR COMPLETE AUDIO SETTINGS INSTRUCTIONS.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>