Vitamix 6300 Platinum Food Blender Jucar Owner’s Manual

Vitamix 6300 Platinum Food Blender Jucar

LET’S GET STARTED

Congratulations!
You are about to see how quick, easy, and delicious healthy eating can be!

Please read all the safety information, warnings, and instructional material found in this booklet before getting started. Set your Vitamix machine on a dry, level surface. Make sure that the power switch is set to Off (O), and that the machine is plugged into a grounded electrical outlet. Then, follow the cleaning instructions on page 18 to prepare your machine for use. Always clean your machine before the first use.

SYMBOLS

• Warning
• Read and understand the owner’s manual
• Electrical shock hazard
• Unplug while not in use, before cleaning, changing accessories or approaching parts that move in use
• Never touch moving parts
• Do not immerse or place the motor base in water
• Hot surface – DO NOT touch

SERVICE AND REGISTRATION

Vitamix Service
Record the model number and serial number of your Vitamix in the spaces provided below for future reference. These numbers can be found on the back of the motor base.

• Model Number
• Serial Number
• Date of Purchase
• Purchased From

Before returning this product for any reason, including repair, first contact Vitamix Customer Service at 1.800.848.2649 or 1.440.235.4840, email service@vitamix.com, or contact your local dealer.

Product Registration

• If you purchased your Vitamix® machine directly from the Vita-Mix® Corporation via the company’s website or call centre by phone, your product was registered at the time of purchase and your Vitamix machine’s warranty has been activated.
• If you purchased your Vitamix machine from an International Distributor or Dealer in countries other than the United States, Canada, United Kingdom, or Ireland, your product is warranted through the International Distributor or Dealer and need not be registered with the Vita-Mix Corporation.

Your machine is not yet registered with Vitamix if you:

1. Purchased from a Dealer in the United States, Canada, United Kingdom, or Ireland
2. Purchased from a military base
3. Purchased from a retail or wholesale store
4. Received your Vitamix machine as a gift
5. Are you not the original owner of the machine

Enjoy faster and easier service in the future by taking a few minutes to register your Vitamix machine today.

Choose one of these easy ways to register your machine:

1. Online at vitamix.com/warranty
2. Email service@vitamix.com
3. Call 1.800.848.2649 or 1.440.235.4840, press option 2

Your warranty may be honoured by Vita-Mix® Corporation or an authorized dealer. Failure to register your machine will not diminish your warranty rights.

IMPORTANT SAFEGUARDS

WARNING:
To avoid the risk of serious injury when using your Vitamix® blender, basic safety precautions should be followed, including the following.

READ ALL INSTRUCTIONS, SAFEGUARDS, AND WARNINGS BEFORE OPERATING BLENDER.

1. Read all instructions.
2. Not intended for use by or near children or persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge. Close supervision is necessary when any appliance is used by or near children or incapacitated persons.
3. To protect against the risk of electrical shock, do not put the blender base in water or other liquid.
4. Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Call Vitamix Customer Service at 1.800.848.2649 or 1.440.235.4840 or email service@vitamix.com at once for examination, repair, replacement, or electrical or mechanical adjustment. If purchased outside the U.S.A. or Canada, contact your local Vitamix dealer.
7. Alteration or modification of any part of the blender base or container, including the use of any part or parts that are not genuine authorized Vitamix parts, may cause fire, electric shock, or injury.
8. The use of attachments not expressly authorized or sold by Vitamix for use with this blender, including canning jars, may cause fire, electric shock, or injury.
9. Do not use outdoors.
10. Do not let the cord hang over the edge of the table or counter.
11. Do not let the cord contact the hot surface, including the stove.
12. Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the blender. A rubber scraper or spatula may be used, but only when the Vitamix blender is not running.
13. The tamper provided must be used only when the main part of the lid is in place.
14. Blades are sharp. Handle or remove the blade and blade assembly from the container with extreme care to avoid injury. To reduce the risk of injury, never place a blade assembly on the motor base unless assembled in the Vitamix container.
15. Do not leave foreign objects, such as spoons, forks, knives or the lid plug, in the container as this will damage the blades and other components when starting the machine and may cause injury.
16. Never attempt to operate with damaged blades.
17. Always operate the blender with the lid and lid plug firmly in place. The lid plug should be removed only when adding ingredients and when using the tamper.
18. When blending hot liquids or ingredients, use caution; spraying or escaping steam may cause scalding and burns. Do not fill the container to the maximum capacity. Always begin processing on the lowest speed setting, variable speed 1. Keep hands and other exposed skin away from the lid opening to prevent possible burns.
19. When making nut nut-butteroil-based foods, do not process for more than one minute after the mixture starts to circulate in the container. Processing for longer periods can cause dangerous overheating.

SAVE THESE INSTRUCTIONS

WARNING

To Avoid Injury.
Read and understand the instruction manual before using this machine.

IMPORTANT INSTRUCTIONS FOR SAFE USE

• This product is intended for HOUSEHOLD USE ONLY and is not intended to be used for commercial purposes.
• Do not leave your Vitamix blender unattended when operating.
• Any repair, servicing, or replacement of parts must be performed by Vitamix or an authorized service representative.

WARNING

Electrical Shock Hazard.

• Use a grounded outlet only.
• DO NOT remove the ground.
• DO NOT use an adapter.
• DO NOT use an extension cord.
• Always unplug before cleaning the motor base or when not in use.
• Do not put the motor base in water or other liquid.
• Failure to follow instructions can cause death or electrical shock.

NOTICE:
THE FAILURE TO FOLLOW ANY OF THE IMPORTANT SAFEGUARDS AND THE IMPORTANT INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR VITAMIX BLENDER THAT CAN VOID YOUR WARRANTY AND CREATE THE RISK OF SERIOUS INJURY.

PARTS AND FEATURES

1. On/Off Switch: The On/Off (or Power) Switch is on the front of the machine base, below the control panel. The On/Off Switch controls the power to the machine. Refer to the Control Panel.

2. Control Panel: Refer to the Control Panel on Page 9.
   CAUTION: Lids and tampers are not interchangeable between different container styles, types and sizes. Refer to Tamper on Page 11.

3. Tall 64-oz. (2 L) capacity container with 2-part lid:

   • Always use the lid and the lid plug when the machine is in operation
   • Never operate the blender without checking to make sure that the lid is securely locked in place.
   • Ounces, Milliliters and Cups are marked.
   • Insert the lid plug through the lid and secure it by turning clockwise.
   • Remove the lid plug to use the tamper or to add ingredients.

4. Tamper: Using the tamper maintains circulation by preventing air pockets from forming during blending.

   • 2-Part Lid: The 2-part Lid is easy to put on and take off, and easy to clean. Always use the lid and the lid plug when the machine is in operation. Snap the lid onto the container and leave it in place for a few minutes. Once the lid has been left on the container, it will be much easier to lock or remove.
   • Lid Plug: Insert through the lid and secure by turning clockwise. Remove the lid plug to use the tamper or to add ingredients.

WARNING

Rotating Blades Can Cause Severe Injury.
DO NOT reach into the container while the machine is running.

• To Lock the Lid in Place: Position the lid on the container with the lid flaps midway between the spout and the handle. Push the lid onto the container until it locks into place. The lid must always be secured when processing, especially when blending hot liquids that may scald. Never operate the blender without checking to make sure that the lid is securely locked in place.
• To Remove the Lid: Lift on one lid flap, while holding the container securely.
• To Remove the Lid Cap: Rotate the lid plug anti-clockwise from the “locked” to the “unlocked” position and lift out.
• Power Cable: Your machine is equipped with a long power cable. Store the unused portion neatly underneath. Plastic cable retainers hold the cable securely. They are flexible and return to position after the cable is lifted out.

CONTROL PANEL

1. On/Off Switch (l)/(O): The On/Off Switch controls the power to the machine base. The switch is located on the front left side of the machine below the control panel. When lit, the machine is plugged in and the On/Off switch is in the On position.

   • After plugging in the unit, make sure that the marker on the Variable Speed Dial points to the Stop Symbol ( ) at the top of the dial and move the On/Off Switch to the On position.
   • If the On/Off switch is moved to the Off position to stop a program mid-cycle, wait 30 seconds for the power to recycle and the timer to reset before moving the On/Off switch back to the On position.
   • Move the On/Off Switch to the Off position at night and whenever the machine is left unattended.

2. Start ( ) / Stop ( ) Switch:
   After the marker on the Variable Speed Dial is rotated from the Stop Symbol ( ) either to Variable Speed 1 or a Program setting, press the Start/Stop Switch to start the machine and initiate the blending process. Pressing the Start/Stop Switch again will stop the blending process.
   Programs can be interrupted by pushing down the Start/Stop switch at any time. If reactivated by pushing down the Start/Stop switch, the program will start at the beginning.

3. Pulse Switch ( ):

   • Variable Speed: Pressing down on the Pulse Switch will cause the machine to blend at the speed setting shown on the Variable Speed Dial for as long as the Pulse Switch is held down.

   • Programs: The Pulse function can be used when a program is selected. Pushing down the Pulse switch when a program is selected will cause the machine to run at 50% of high power for as long as the Pulse switch is pushed down.
     CAUTION

   • To Avoid Possible Burns, Never Start on Speeds Above 1 when Processing Hot Liquids.

   • Escaping steam, splashes or contents may scald.

   • To secure the contents, lock the lid and lid plug securely in place before operating the machine.

   • Always start on Variable 1, then slowly increase to 10.

4. Variable Speed Dial:
   The Variable Speed Dial serves two functions: the use of three program settings or ten Variable Speed settings.

   • To use programs: rotate the Variable Speed Dial to the left to the desired program.
   • To use Variable Speed:
   • Rotate the Variable Speed Dial to the right to 1.
   • Press down on the Start/Stop switch.
   • Rotate the Variable Speed Dial between 1 and High during the blending cycle to increase or decrease the speed of the blades.
   • At the end of the blending cycle, rotate the marker on the Variable Speed Dial back to the Stop Symbol ( ) at the top of the dial.

5. Programs:
   Your machine is equipped with three program settings for the most commonly used recipes. Rotating the Variable Speed Dial to the left of the centre allows you to select a program for Smoothies, Frozen Desserts and Hot Soup. The programs are optimised for these recipe categories, but may also work well with other recipe choices.

ABOUT THE BLADES

The wet-blade container comes as standard with the Vitamix machine. The blade is identified by a “W” for wet. This blade is used for most of your recipes. Additional containers with wet or dry blades may be purchased separately.

WARNING

Rotating Blades Can Cause Severe Injury.
DO NOT reach into the container while the machine is running.

• Wet-Blade Container: Designed for processing liquids, including juice, frozen mixtures, sauces, soup, purees, and batter, and wet chopping. The wet blades can also process grain and knead dough, but they are not quite as efficient as the dry blades in this application. See instructions for dry container use.
• Dry-Blade Container: These blades are clearly marked “D” and are designed specifically for processing dry materials such as grain, cereal and coffee, and are also used for kneading bread dough. The dry blades CANNOT process liquids efficiently. If you prepare herbs regularly, you may wish to purchase a separate dry-blade container.

CAUTION
Moving Parts May Become Hot with Extended Use.

• DO NOT touch.

TAMPER

CAUTION

Rotating Blades Can Cause Damage.
Lids and tampers are not interchangeable between different container styles, types and sizes. Use the tamper that was supplied with your machine.

How to Determine the Tamper to be Used with Your Container
Each type of tamper is designed to be used safely and effectively with a particular container. If a tamper came with your container, it is the correct tamper for the container. If a tamper did not come with your container or you want to determine if a tamper that you already have can be used with your new container, please compare your container with the containers and matching tampers in the illustration below. Before using the tamper during the blending process, verify that it is the correct tamper.

• 64 oz./2 L Short Containers use Tamper P/N 016041, which is approximately 11 inches long
• 64 oz./2 L Tall Containers uses Tamper P/N 000760, which is approximately 12- ½ inches long.
• 32 oz. and 48 oz. / 0.9 L and 1.4 L Containers use Tamper P/N 015033, which is approximately 9-¾ inches long.

To verify that you are using the correct tamper, place the lid on an empty container, remove the lid plug and insert the tamper. If it is the correct tamper, it should fit easily into the opening, but should not come into contact with the blades no matter where you move the tamper inside the container. IF THE TAMPER TOUCHES THE BLADES AT ANY ANGLE – DO NOT USE THE TAMPER WITH YOUR CONTAINER. If you do not have the correct tamper for your container, contact your local Vitamix Dealer.

HOW TO USE THE TAMPER

WARNING
Rotating Blades Can Cause Severe Injury.

• DO NOT put hands, spatulas etc. into the container while the machine is running or while the container is still on the base.
• Lids and tampers are not interchangeable between different container styles, types and sizes. Use the tamper that was supplied with your machine.

IMPORTANT!

• The splash disk (near the top of the tamper) and lid prevent the tamper from hitting the blades when the lid is secured properly in the locked position.
• The container should not be more than two-thirds full when the tamper is used during blending.
• To avoid overheating during blending, DO NOT use the tamper for more than 30 consecutive seconds.
• If the food does not circulate, the machine may have trapped an air bubble. Carefully remove the lid plug, while making sure the lid stays firmly in place. Release the air bubble by inserting the tamper through the lid plug opening.
• Holding the tamper straight down may not help the ingredients circulate. If necessary, point the tamper towards the sides or corners of the container. DO NOT try to force the tamper more deeply into the container.

HINTS FOR SETTING SPEEDS

CAUTION

To Avoid Possible Burns, Never Start on Speeds Above 1 when Processing Hot Liquids.

• Escaping steam, splashes or contents may scald.
• To secure the contents, lock the lid and lid plug securely in place before operating the machine.
• Always start on Variable 1, then slowly increase to 10.

Variable Speed
Before using the Variable Speed option, always begin with the Variable Speed Dial marker pointing to the Stop Symbol ( ) at the top of the dial.

1. Rotate the dial to the right to Variable Speed 1.
2. To activate the blending process, press down on the Start/Stop Switch.
3. Slowly turn the Variable Speed Dial to the desired speed, depending on the recipe used.
4. At the end of the blending cycle, rotate the Variable Speed Dial back to the Stop Symbol ( ) at the top of the dial.
   • Use the highest setting stated in the recipe for as much of the processing time as possible to make smoothies, soup, shakes, frozen mixtures, purées, nut butter, and grinding grain. Processing times will generally be less than one minute (most take less than 30 seconds). The higher speed provides the best quality of refinement, breaking down ice, frozen fruit, whole fruit or vegetables, and grains to a smooth, lump-free consistency.
   • Blending for too long at too low a speed setting will overheat the machine and cause the Automatic Overload Protection to turn off the machine. Blending on a higher speed maximises the working of the motor’s cooling fan to avoid overheating.

Programs
Program blending speeds and duration vary and will stop automatically at the end of the program.

OPERATING INSTRUCTIONS

Wet-Blade Container

• The Wet-Blade Container is designed for processing liquids, including juice, frozen mixtures, sauces, soup, purées and batter.
• Before using this container with Programs or the Variable Speed option, always begin with the Variable Speed Dial pointing to the Stop Symbol ( ) at the top of the dial.

1. Move the On/Off switch to the On position.

2. Load the container before placing it on the motor base. Place liquids and soft foods in the container first, then solid items and, finally, ice. Although not necessary for blending, you may want to cut or break food into smaller pieces for more precise measurement of ingredients.

3. Fasten the 2-part lid securely. Always use the complete 2-part lid when blending (unless the tamper is inserted through the lid plug opening). Make sure that the lid is securely latched, especially when blending hot ingredients.

4. With the motor off, set the wet-blade container on the motor base by aligning it over the centring pad. Never attempt to put a container onto an operating motor base or to operate a motor base without a container properly in place.

5. Use the Variable Speed Dial to select a function.

   • Variable Speed – Rotate the dial to the right of the centre to Variable Speed 1.
   • Programs – Rotate the dial to the left of the centre to the desired program.

6. Activate the blades by pressing the Start/Stop Switch. Your container may shift as it is aligned.

   • Variable Speed – slowly rotate the Variable Speed Dial to the right to the desired speed.
   • Programs – The program blending speeds and duration vary and will stop automatically at the end of the program. Programs can be interrupted by pushing down the Start/Stop switch at any time. If reactivated by pushing down the Start/Stop switch, the program will start at the beginning.

7. If the mixture stops circulating, you may have trapped an air bubble. To resolve, insert the tamper through the lid plug and stir until it “burps”. If this does not work, press the On/Off switch to stop the motor. Remove the container from the motor base and use a rubber spatula to press the air bubble away from the blades. Return the container to the motor base, replace the lid and continue blending.
   CAUTION
   To Avoid Possible Burns, Never Start on Speeds Above 1 when Processing Hot Liquids.

   • Escaping steam, splashes or contents may scald.
   • To secure the contents, lock the lid and lid plug securely in place before operating the machine.
   • Always start on Variable 1, then slowly increase to 10.

8. Take proper care when handling and processing hot ingredients and when making hot soup and sauces.

9. Due to the machine’s speed, processing times are much quicker than with standard appliances. Until you are accustomed to the machine, time things carefully to avoid over-processing.

10. After pressing the Start/Stop switch to stop the cycle, wait until the blades stop completely before removing the lid or container from the motor base.

Dry-Blade Container
Your dry-blade container should be used only for hard, dry materials, such as grain, and for kneading dough. Before using this container with Programmes or the Variable Speed option, always begin with the Variable Speed Dial pointing to the Stop Symbol ( ) at the top of the dial.

1. Load the container before placing it on the motor base.
2. Fasten the 2-part lid securely. Always use the complete 2-part lid when blending (unless the tamper is inserted through the lid plug opening).
3. With the motor off, set the dry-blade container on the motor base by aligning it over the centring pad. Never attempt to put a container onto an operating motor base or to operate a motor base without a container properly in place.
4. To begin, make sure that the On/Off switch is in the On position.
5. Use the Variable Speed Dial to select a function.
   • Variable Speed – Rotate the dial to the right to Variable Speed 1.
   • Programs – Rotate the dial to the left to the desired program.
6. Activate the machine by pressing the Start/Stop Switch. Your container will shift and align itself.
   • Variable Speed – slowly increase the Variable Speed to the desired speed.
   • Programs – The program blending speeds and duration vary and
     will stop automatically at the end of the program. Programs can be interrupted by pushing down the Start/Stop switch at any time. If reactivated by pushing down the Start/Stop switch, the program will start at the beginning.

CARE AND CLEANING

Container
To prepare your new machine for initial use, follow the steps under Normal Cleaning, below. This will clean the unit and break in the motor.

Normal Cleaning
Always begin with the Variable Speed Dial pointing to the Stop Symbol ( ) at the top of the dial.

1. Fill the container half full of warm water. Add a few drops of liquid dish detergent to the container.
2. Snap or push the complete 2-part lid into the locked position.
3. Rotate the Variable Speed Dial to 1. Press the Start/Stop switch. Slowly increase the Variable Speed to High. Run the machine for 30 to 60 seconds. Rotate the Variable Speed Dial back to the Stop Symbol ( ) at the top of the dial.
4. Rinse and drain the container.

To Sanitize:
Always begin with the Variable Speed Dial pointing to the Stop Symbol ( ) at the top of the dial.

1. Follow the cleaning instructions above.
2. Fill the container half full of water and add 1 ½ teaspoons of liquid bleach.
3. Snap or push the complete 2-part lid into the locked position.
4. Rotate the Variable Speed Dial to 1. Press the Start/Stop switch. Slowly increase the Variable Speed to High. Run the machine for 30 to 60 seconds. Rotate the Variable Speed Dial back to the Stop Symbol ( ) at the top of the dial.
5. Allow the mixture to stand in the container for an additional 1 ½ minutes.
6. Pour out the bleach mixture. Allow the container to air dry.
7. Do not rinse after sanitizing.

Lid, Lid Plug and Tamper
Separate the lid and lid plug. Wash the lid, and lid plug and tamper in warm, soapy water. Rinse clean under running water and dry. Reassemble before use.

IMPORTANT:
To ensure continued and effective performance, do not put the container, lid, lid plug or tamper in the dishwasher.

Motor Base

1. Unplug the power cable.
   WARNING
   Electrical Shock Hazard.

   • Always unplug before cleaning the motor base or when not in use.
   • Do not put the motor base in water or other liquid.
   • Failure to follow instructions can cause death or electrical shock.

2. Wash the outside surface with a damp, soft cloth or sponge that has been rinsed in a mild solution of washing-up liquid and warm water. Do not place the motor base in water.

3. The centring pad can be removed for more thorough cleaning.

4. Thoroughly clean the switches so that they work freely. They may become sticky from use. Moisten a cotton bud with a household degreaser or cleaner and clean the grooves around the switches. Immediately dry all surfaces.

5. Polish with a soft cloth.

Retainer Nut Loosening
If the retainer nut at the bottom of your container loosens and no longer holds the blade assembly securely in place, DO NOT CONTINUE TO USE THE CONTAINER. Contact your local dealer or distributor immediately for instructions.

TROUBLESHOOTING

Your Vitamix motor is designed to be protected from overheating during use. This feature will shut off the motor. Allow the machine to cool for 20-45 minutes before beginning another blending cycle.

Tips to prevent “overloading” your Vitamix machine:

• Only process Vitamix recipes when learning to use the machine
• Do not process recipes at lower speeds than those recommended
• Do not process recipes at higher speeds than those recommended
• Do not process recipes for longer than recommended
• Use your tamper to process thicker mixtures and keep ingredients moving around and through the blades

WARRANTY

7-Year Full Machine Warranty

1. PRODUCT REGISTRATION.
   Vita-Mix® Corporation (“Vitamix”) strongly encourages you to register your purchase by completing and returning the product registration card that came with this Machine. You can register online at vitamix.com/warranty; or by calling our Customer Service Department at 1.800.848.2649 or 1.440.235.4840. Failure to register your product purchase will not diminish your warranty rights. However, registering your purchase will allow Vitamix to better serve you with any of your customer service needs.

2. WHO CAN SEEK WARRANTY COVERAGE.
   This Warranty is extended by Vitamix to the owner of this Machine for personal household use only. This Warranty does not apply to products used for commercial, rental or re-sale purposes. Should ownership of the machine change during the 7 years, please update the Machine’s owner information at vitamix.com/warranty.

3. WHAT IS COVERED.
   Vitamix warrants to the owner that if this Machine (a “Machine” consisting of a motor blender base and any containers purchased together) fails within 7 years from the date of purchase due to a defect in material or workmanship or as a result of normal wear and tear from ordinary household use, Vitamix will, within 30 days of receipt of the returned product, repair the failed Machine or part of the Machine free of charge. If, in Vitamix’s sole discretion, the failed Machine or part of the Machine cannot be repaired, Vitamix will elect to either (A) replace the Machine free of charge or (B) refund the full purchase price to the owner, unless Vitamix receives prior written notice of the owner’s preference.

4. WHAT IS NOT COVERED?
   This Warranty does not apply to Machines that have been used commercially or in non-household applications. This Warranty does not cover cosmetic changes that do not affect performance, such as discolouration or the effects of the use of abrasives or cleaners or food build-up. This Warranty is only valid if the Machine is used and maintained under the instructions, warnings and safeguards contained in the owner’s manual.

   • Vitamix will not be responsible for the cost of any unauthorized warranty repairs.
   • REPAIR, REPLACEMENT OR REFUND OF THE PURCHASE PRICE ARE THE EXCLUSIVE REMEDIES OF THE PURCHASER AND THE SOLE LIABILITY OF VITAMIX UNDER THIS WARRANTY. NO EMPLOYEE OR REPRESENTATIVE OF VITAMIX IS AUTHORIZED TO MAKE ANY ADDITIONAL WARRANTY OR ANY MODIFICATION TO THIS WARRANTY THAT MAY BE BINDING UPON VITAMIX. ACCORDINGLY, THE PURCHASER SHOULD NOT RELY UPON ANY ADDITIONAL STATEMENTS MADE BY ANY EMPLOYEE OR REPRESENTATIVE OF VITAMIX. IN NO EVENT, WHETHER BASED ON CONTRACT, INDEMNITY, WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, SHALL VITAMIX BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOSS OF PROFIT OR REVENUE.
   • Some states do not allow limits on warranties. In such states, the above limitations may not apply to you. Outside the U.S.A. and Canada, other warranties may apply.

5. WHAT VOIDS THIS WARRANTY?
   Abuse, misuse, negligent use, alteration of the Machine, exposure to abnormal or extreme conditions, or failure to follow the operating instructions will void this Warranty.
   The Warranty is also void if repairs to the Machine or any part of the Machine are performed by someone other than either Vitamix or an authorized Vitamix Service Provider or if any part of a Machine subject to this Warranty is used in combination with a motor base or container that is not expressly authorized by Vitamix.

6. HOW TO OBTAIN RETURN AUTHORIZATION UNDER THIS WARRANTY.

   • If the Machine or any part of the Machine needs service or repair, please call Vitamix Customer Service at 1.800.848.2649 or 1.440.235.4840. You will be asked to provide a date of purchase and proof of purchase for any product that has not been registered with Vitamix.
   • For products subject to this Warranty, you will be provided with a return authorization number, up-to-date shipping instructions and a pre-paid return pick-up label. Vitamix will pay standard shipping costs on the return of a Machine or part for warranty service and repair and for return shipment of the product to you after the warranty repair or replacement. The purchaser is responsible for the costs of special shipping requests.
   • Within the U.S.A. and Canada, this Warranty is honoured directly through the Vita-Mix® Corporation.

United States

• Vita-Mix® Corporation 8615 Usher Road Cleveland, Ohio 44138-2199
• 1-800-848-2649
• service@vitamix.com.

Canada

• Vita-Mix® Corporation 200-1701 Shepherd Street East Windsor, Ontario N8Y 4Y5
• 1-800-848-2649
• service@vitamix.com.

unless you notify Vitamix of any problem, including shipment damage, within 48 hours of delivery.

SPECIAL INTERNATIONAL INSTRUCTIONS
If a machine was purchased within the U.S.A. or Canada but is currently outside the U.S.A. or Canada, all shipping and resulting taxes and duties are at the owner’s expense. Call +1-440-235-4840 or email service@vitamix.com for more details.

SPECIFICATIONS

Vitamix® 6300

Motor:

• ≈ 2 peak output horsepower motor

Electrical:

• 120 V, 50/60 Hz, 11.5 A
• Uses a U.S.A. three–prong grounded cord.

Dimensions:

• Height: 20.3 in./51,4 cm
• Width: 8.8 in./20,3 cm
• Depth: 9.0 in./22,9 cm
• When applicable:

To see the complete line of Vitamix® products, visit vitamix.com.

Vita-Mix® Corporation

• 8615 Usher Road Cleveland, OH 44138-2103 U.S.A.
• 1.800.848.2649
• +1.440.235.4840
• vitamix.com.

©2014 Vita-Mix® Corporation. No part of this publication may be reproduced or transmitted in any form or by any means, or stored in a database or retrieval system, without the written permission of the Vita-Mix® Corporation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>