V-TAC VT-12045 LED Panel Installation Guide

: June 6, 2024
: V TAC

Table of Contents

TECHNICAL DATA:
INTRODUCTION & WARRANTY
WARNING!
INSTALLATION DIAGRAM:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

INNOVATIVE LED LIGHTING
WEEE Number: 80133970
INSTALLATION INSTRUCTION LED PANEL

V-TAC VT-12045 LED Panel-

TECHNICAL DATA:

Model	VT-12045
Watts	45
Lumens	5400
Beam Angle	120°
Body Type	Aluminum+PMMA+PP
CRI	>80
PF	>0.9
IP Rating	IP20
Operation Temperature	-20 to +40°C
Output Current	1050mA
Output Voltage	DC:30-42V
Dimension	1195x595x14mm
Input Power	AC:200-240V,50/60Hz

INTRODUCTION & WARRANTY

Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours of Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

V-TAC VT-12045 LED Panel-1

2 YEARS
**WARRANTY***

WARNING!

Please make sure to turn oﬀ the power before starting the installation.
The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
If the external ﬂexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualiﬁed person in order to avoid a hazard.
Install only by certiﬁed Electrician.
For Indoor use only

This marking indicates that this product should not be disposed of with other household wastes.

Caution, risk of electric shock.

Luminaires not suitable for covering with thermally insulating material.

Note: The panel works on DC 30-42V, please connect correctly with the conductor before connecting the conductor to the power supply main.

INSTALLATION DIAGRAM:

V-TAC VT-12045 LED Panel-3 | 1. Make a hole in the ceiling.| V-TAC VT-12045 LED Panel-4 | 2. Fix the panel into the ceiling.
---|---|---|---
V-TAC VT-12045 LED Panel-5 | 3. Wire the DC cable of the panel to the driver and then wire the AC source cable to the power supply.| V-TAC VT-12045 LED Panel-6 | 4. Turn on the switch, test the ﬁxture light on.

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B