Nakamichi NQ511BR Digital Media Receiver User Manual

: June 6, 2024
: Nakamichi

Table of Contents

ACCESSORY LIST
DIMENSIONS ( UNIT : MM)
FRONT PANEL
WIRING CONNECTION
GENERAL OPERATION
AUDIO/MENU SETTING
RADIO OPERATION
USB OPERATION
BLUETOOTH OPERATION
SPECIFICATIONS
PRECAUTIONS ON POWER SUPPLY AND SPEAKER CONNECTIONS:
FCC WARNING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Nakamichi NQ511BR Digital Media Receiver

ACCESSORY LIST

Check and identify the contents of your package:

User Manual x 1 pc
Receiver x 1 pc
ISO Male Connector x 2pcs
Disassemble Tool x 2pcs
Remote Control x 1 pc

DIMENSIONS ( UNIT : MM)

FRONT PANEL

FUNCTION	OPERATIONS & CONTROLS
1. Knob	SEL (Select/ Menu) button and Volume knob
2. IR remote	IR remote control sensor
3. EQ	Switch preset EQ
4. /SRC	Press the Power/ SRC (Source) button to switch between the button

RADIO, BT(Bluetooth), USB with a USB device inserted, AUX-IN mode(input assistant).
5. • / BND| Long Press this button to activate SIRI. Short press this button to change band. Short press this button to pick up/cut off phone call.
6. Return | Short press back to the previous configuration point.
7.| Short press button display clock in all mode. In USB mode, Short press to select All info/Elapsed time/File info/Track info/clock/Spean operation. Long Press button for 3 sec(LCD show DISP OFF) turn off illumination on panel and touch any button to turn on illumination, Long Press button for 3 sec (LCD show DISP ON) to retrieve illumination.
8. MIC hole| Integrated microphone
9. MUTE| In power on mode, press the mute button to toggle mute ON or OFF.
10. Search| Long press auto search stations
11.| Tune back, search back, crawl back, fast reverse
12.| Tune forward, search forward, crawl forward, fast forward
13. / 1| Pause/ start, preset button 1|
14. INT /2| INT (intro), preset button 2
15. RPT / 3| RPT (repeat), preset button 3
16. RDM / 4| RDM (random), preset button 4
17. / 5| Folder up, preset button 5
18. / 6| Folder down, preset button 6
19. AUX IN| Auxiliary input
20. RESET|
21. USB| USB port
22. LCD screen| LCD screen

WIRING CONNECTION

| Colour| Function
---|---|---
A| Red| Ignition Cable
Black| Ground Cable
Blue| ANT Automatic
Yellow| Power Supply
B| Green Green/Black| Rear Left Speaker(+)
Rear Left Speaker(-)
White White/Black| Front Left Speaker(+)
Front Left Speaker(-)
Grey /Black| Front Right Speaker(+)
Front Right Speaker(-)
Violet Purple/Black| Rear Right Speaker(+)
Rear Right Speaker(-)

GENERAL OPERATION

Power On/Off

Press any button to turn the unit on.
Press and hold the /MODE button to turn the unit off

Removing The Front Panel

Press the RELEASE button to detach the front panel.

Volume Up and down

Rotate the Volume knob to adjust the volume level.

Mute On/Off

Briefly press the button to toggle mute on or off.

Changing The Modes

Press the /MODE to select between Radio, USB(with USB device inserted), AUX-IN(auxiliary input) and BT(Bluetooth) modes.

Audio/Menu Setting

– Press Volume (SEL) button momentarily rotate to select Function /Audio/Display/Tuner/Clock/Beep/ Animation/Demo mode.

– Press Volume (SEL) button get into Audio mode and rotate Volume button to select manual EQ/X-bass/Preset EQ/Loudness/Fader /Balance.

– Select manual EQ and rotate Volume button to select 10 different band EQ. Once select desired EQ band then rotate volume button left or right to adjust level.

– Select Present EQ then rotate volume button to select USER/FLAT /CLASSIC/ROCK/POP/ JAZZ/COUNTRY

AUDIO/MENU SETTING

– Select Loudness and rolled volume bull on lo swatch ON/OFF.
– Select Fader and rolled volume bull on lo adjust Front I or Rear position.
– Select balance and rotate volume button to adjust Left or Right position.

Display Setting

– Press Volume button momentarily rotate to select Color select /Radio text/lD3 Tag.
– Select Color selection and Rota le volume bullion lo select desire color.
– Select CUSTOM R/G/B to adjust each GREEN/RED/BLUE color level.
– Select RADIO TEXT and rolled lo swatch ON/OFF.
– SELECI ID3 IAG and rotate to switch ON/OFF.

Tuner Setting

– Select Tuner and rotate to select LOCAL SEEK/MONO SET/REGIONAL /RDS SET/TA SET/ AF SET/EON SET/Pl REGIONAL/PTY SEARCH/
– Select LOCAL SEEK and rotate volume button to switch ON/OFF.
– Select MONO SET and rotate volume bullion lo swatch ON/OFF.
– Select REGIONAi and rotate volume button to select EUROPE /USA/ ASIA/RUSSIA.
– Select RDS SET and rotate to volume button switch ON/OFF.
– Select TA SET and rotate volume button to switch ON/OFF.
– Select AF SET and rotate volume button to switch ON/OFF.
– Select EON SET and rotate volume button to switch ON/OFF.
– Select Pl REGIONAL and rolled volume bullion lo switch ON/OFF.
– Select PIY and rotate to select different stations.

Clock Setting

– Select CLOCK and rotate to select CLOCK FORMAT/CLOCK ADJUST
/DATE FORMAT/DATE SET/TIME SYNC.
– Select CLOCK FORMAT and rotate to select 12H or 24H.
– Select CLOCK ADJUST to adjust your time.
– Select DATE FORMAT/DATE SET to adjust your DATE/MONTH/YEAR
– Select TIME SYNE and rotate to switch ON/OFF.

Beep Setting

-Select BEEP and rotate to switch ON/OFF.

**Animation Setting

**

-Select and rotate to select time interval for Animation.

DEMO MODE Setting

-Select and rotate to switch DEMO MODE ON/OFF.

Auxiliary Input Jack

Using a 3.5mm cable to connect a external device such as MP3 players, CD players etc. to the auxiliary input jack on front panel.
Then you can hear the sound of other playback devices such as MP3 players, CD players etc. through your car speakers .

Reset
Push the RESET button(behind the front panel) with a thin object with a pointed end to reset the unit over 6 seconds back to the factory default settings.

RADIO OPERATION

Change Bands

In radio mode, shortly press the BAND/DISP to select between the FM I, FM2, FM3(F3) and AM I (MW I), AM2(MW2) bands.

To Store / Recall Preset Stations

The radio can be stored 6 preset stations for each band (FM l. FM2, FM3, AM l and AM2) for a total of 30 preset stations. To memorize a slalom: Press and hold lye desired presell bullions (l-6) lo save a radio slalom. To recall a preset station: Briefly press the respective station button ( 1-6) to recall the corresponding preset station.

Manual Tuning

In the radio mode:
Press and hold the >>I or I<< button to enter the manual tuning mode, then briefly press the >>I or I<< button to search the next or previous frequency slop by slop. Press and hold >>I or I<< lo advance quickly.

Seek Tuning

In radio mode, briefly press the >>I orl<< to seek to previous or next strong station.

Automatic Store Preset Station

Press and hold AS for more than 2 seconds to store 18 FM stations and 12 AM(MW) stations automatically.

Item	Selectable Setting
RDS On/Off	Shortly press the Volume button to choose the ‘AREA Elf Station.

The system will change to the frequency setting within 3 seconds
PTY.J (Program -type)| Once Into the P1Y mode, press the get Into program type Item, and rotating encoder volume knob to selected category,
■ Available Program lye: POP M; ROCK M; Ein M; LIGHT M; CLASSICS; QTI,ER M;JAZZ M; COUNTRY; NATION M; OLDIES M; FOLK M; A-TEST: Alarm; NEWS; AFFAIRS: INFO; SPORT; EDUCATE; DRAMA; CULTURE; SCIENCE; VARIED; WEATHER; FINANCE; CHILDREN; SOCIAL; RELIGION; PHONE IN; TRAVEL; LEISURE; DOCUMENT
AF (Alternate Frequencies)| ■ ON: The unit will be search;;J for another station with stronger signal, but with the same program identification as the current station automatically.
■ OFF: Cancel
TA (Traffic Announcement)| ■ ON: When flare is traffic announcement, the unit switches to the homer mode (regardless of the current mode) and begins to broadcast the announcer net on traffic conditions. When the traffic announcement is over, it returns to the previous mode.
■ OFF: Traffic you cement does not cut n

USB OPERATION

If you the would stick like into to the playback USB port. files The contained MP3/WMA in a and USB other stick, music please files I will be played automatically.
Note: The USB port of this car radio is also designed for chagrin for
iPhone/android mobile phone. The charging current consumption is 1 ampere.

Select Next Track or Previous Track

In the USB mode, briefly press the >>I or I<< button to play the next or previous track.

Fast Forward/Backward

Press and hold the >>I or I<< button to fast forward or backward a track.

Play / Pause
Press the / button to interrupt the playback of a music (pause function). Press this button again to continue the playback.

Introduction Scan

Press INT to plays first 10 seconds of each track.
Press again to cancel the INT function.

INT ON – Plays the first 10 seconds of each track.
INT OFF – Cancels the INT function.

Repeating the track

Press RPT of toggle between RPT FLD, RPT ALL, and RPT ONE.

RPT FLD – Continuously repeats all files in current folder.
RPT ALL – Plays all tracks on USB device.
RPT ONE – Continuously repeats selected track.

Playing all tracks in random

Press RDM to play songs in random order, press again to cancel
the RDM function.

RDM ON – Plays all tracks in random order.
RDM OFF – Cancels the RDM function.

Press the or button to select the previous or the next folder.
Folder access is only available on devices with more than one folder.
Press and hold the or buttons to jump 10 tracks backward or forward. It is required that over 10 tracks be available on the storage medium.

BLUETOOTH OPERATION

Pair and Connect

Before using the Bluetooth device as a handsfree system for a Bluetooth enabled mobile phone for the first time, you must pair and connect the two devices as follows:

In any mode, prior to pairing and connecting, the BT logo on the LCD indicating that no device is connected. The head unit broadcasts the pairing signal constantly when no devices are connected. Activate the Bluetooth on your device before beginning the pairing process.
When your phone finds the car audio system, the “NQ511 BR or NQ511 BG or NQ511 BW” name will be displayed on your phone screen.
Choose the “NQ5l l BR/NQ5l l BG/NQ5l l BW” from your mobile phone list to pair and connect with the car audio system. Upon confirming, the BT logo will stop flashing.
When pairing is complete, the mobile phone audio will automatically transfer to the car audio system whenever a call is made or received, or when the mobile phone plays music.

Note:
For more details of Bluetooth pairing, please refer to the owner’s manual for your mobile phone.

Make a Call

To make a call, dial the call directly from the paired mobile phone.

Redial Last Dialed Number
Press and hold the button to redial the last dialed phone number.
Press the button to activate SIRI function.

Answer a Call

When the mobile phone is called, the incoming telephone number displays on the LCD display, press the button to answer the incoming call.

Reject or End a Call

Press the button to reject, press and hold the'(” to end the call.

Switch Audio Between Car Audio and mobile Phone
During a call, press the button to switch the audio source from the car audio system back to your mobile phone.

Adjust Call Volume

During Call a call, Volume use Volume knob or VOL+/VOL- button to adjust the call volume level.
• Use the MUTE button to mute sound.

Audio Streaming (A2DP)

The head unit supports A2DP wireless streaming audio from a Bluetooth mobile device directly to your head unit.

The following functions can be used to control the music:

Press the button to skip to the next available audio track.
Press the button to skip to the previous audio track.
Press the / button to toggle between play and pause during music playback.

APP OPERATION

Using the application from NAKAMICHI, you can wireless remote
control the car audio of NQSl 1 B head unit with Apple & Android devices.

Please go to the APPLE APP Store or Google Play Store and search NAKAMICHI app, after downloading the APP, install it on your Apple & Android devices.

Connect your smartphone to NQSl 1 B through Bluetooth, then tap the APP and turn on it on your smartphone.

Now you can control the audio of NQ511 B head unit by your smartphone.

SPECIFICATIONS

General

PRECAUTIONS ON POWER SUPPLY AND SPEAKER CONNECTIONS:

Do not connect the speaker leads of the power cord to the car battery; otherwise, the BEFORE connecting unit will the be speaker seriously leads damaged. of the power cord to the speakers, check the speaker wiring in your car.

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: {l) this device may not cause harmful interference, {2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

SCAN OUR QR CODE OR VISIT WWW.NAKAMICHICARAUDIO.COM FOR COMPLETE AUDIO SETTINGS INSTRUCTIONS
nakamichi.global
nakamichi.caraudio