BluGuitar TWINCAB 2×2 Speaker Cabinet User Manual

June 6, 2024
BluGuitar

BluGuitar TWINCAB 2×2 Speaker Cabinet - LOGO

BluGuitar TWINCAB 2×2 Speaker Cabinet

User Manual

BluGuitar TWINCAB 2×2 Speaker Cabinet - FIGURE 1

CONGRATULATION ON YOUR BLUGUITAR® TWIN CAB!

TWINCAB™
Its compact design and light weight of less than 20 kg enable it convenient to transport with only one hand. Configured for horizontal or vertical operation with a rotatable logo, this compact 2×12“ cabinet is an ideal partner for the BluGuitar® AMP1 , lunchbox amps, and “classic“ 100w heads.
TWIN CAB™ can be operated in both mono and stereo with its tonality characterized by accurate bass, warm and full mids, as well as soft highs with balanced frequency projection.
The closed-back design with two bass reflex openings at the front gives the cabinet extra low-end response while the basketweave front cloth works like a filter that reduces harshness ensuring silky high frequencies. Depending on the way of operation you get two different sound characters featuring either more bass or mids.
The „ BG-12 Special“ speaker specifically developed for the TWINLAB™ is harmoniously tuned to the reinforced birch multiplex housing. TWINLAB™ comes complete with a robust, padded protective cover.

BluGuitar TWINCAB 2×2 Speaker Cabinet - FIGURE 10

Connecting TWINCAB to an amplifier

TWINCAB™ has a MONO INPUT and two inputs that can be used alternatively for STEREO.
Mono operation
When using the MONO INPUT , both speakers are active, delivering 150 watts at 16 ohms. That gives you enough headroom for maximum power-driven by T M AMP1   or any other classic tube amp. Mind that the 16 ohms output of your amplifier is connected with a speaker cable only to the MONO INPUT of your BluGuitar® TWINLAB™.
The STEREO INPUT sockets should not be used during mono operation.

BluGuitar TWINCAB 2×2 Speaker Cabinet - FIGURE 2
CAUTION: Warranty is void in the case of speakers being overloaded.

Stereo operation
In case you want to use both speakers separately, each of the STEREO INPUT sockets connects to one speaker only. One speaker handles 75 watts at 8 ohms. Make sure that only these 2 inputs are connected with 2 speaker cables to the 8 ohms outputs of your amp(s). The MONO INPUT should not be used during mono operation.
BluGuitar TWINCAB 2×2 Speaker Cabinet - FIGURE 3 HORIZONTAL

BluGuitar TWINCAB 2×2 Speaker Cabinet - FIGURE 4

VERTICAL

BluGuitar TWINCAB 2×2 Speaker Cabinet - FIGURE 5

BluGuitar TWINCAB 2×2 Speaker Cabinet

TWINCAB ™
Type: 2 x 12“ Closed Back
Power: mono 150 Watt, stereo 2 x 75 Watt
Impedance: 16 Ohm mono, 2 x 8 Ohm stereo
Speaker: 2 x 12” BluGuitar BG12-S Speaker, Rear Loaded
Weight: 18,7 kg (41,23 lbs)
Dimensions: 40 x 75 x 33 cm (15.75” x 29.53” x 13”)

VINTAGE PREMIUM SPEAKER CABLE
Type: Speaker Cable, Custom Wire
Connectors: 1/4” Nickel Plated
Lenght: 5,67 m (18ft 7.2in)
Sleeve: Black Tweed

BluGuitar GmbH, Bismarckstraße 67, D-66121 Saarbrücken, Germany
BluGuitar.com
© Copyright 2018 BluGuitar GmbH.

Documents / Resources

| BluGuitar TWINCAB 2x2 Speaker Cabinet [pdf] User Manual
TWINCAB, 2x2 Speaker Cabinet
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals