LUXPRO CUBI738 Compact Rechargeable LED Headlamp User Manual
- June 6, 2024
- LUXPRO
Table of Contents
User Manual
CUBI738
Compact Rechargeable
LED Headlamp
Features
Durable ABS and rubberized compact design
LPE optics
Dual button intuitive mode selection
Non-slip adjustable headband
IPX7 waterproof rating
Rechargeable 250mAh Li-ion battery (USB cable included)
Product Warranty
The LP738 has a Limited 1-Year Warranty Against Manufacturer’s
Defects from time of purchase.
For warranty claims please contact us by calling
801-553-8886 or sending an email to
info@simpleproducts.com
Operation Instructions
On/Off: Press and release the button on the right side of the headlamp to
turn on and off.
High+ Mode: From any mode, press and hold the button on the left side of
the headlamp for 3 seconds to turn on High+ Mode.
Cycle Modes: Press and release the button on the left side of the
headlamp repeatedly to cycle through modes (High/Medium/Flood Low/Flood
Red/High+). Pushing the left button after the headlamp has been turned off
will recall the last mode used.
Strobe Mode: From any mode, press and hold the left button for 3 seconds
to switch to Strobe mode.
Charging Instructions
The LP738 uses a Li-poly; 3.7V 150 mAh rechargeable battery.
To charge the headlamp, locate the charge port on the bottom of the light
(opposite of the on/off button).
Plug the small end of the Micro-USB charging cable (included) into the port on
the headlamp. Plug the opposite end of the charging cable into a USB power
source.
The blue battery indicator lights on the side of the headlamp will light up to
indicate that the light is charging. The headlamp is fully charged when all 4
battery indicator lights are lit.
The rechargeable battery is sealed, and replacement is not necessary.
The LP738 has a charge time of approximately 1 hour.
luxpro.com
866.553.8886
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065