Kivo VL6WF02 Vilo 6 Mesh Wi-Fi System User Guide

Kivo VL6WF02 Vilo 6 Mesh Wi-Fi System

AT A GLANCE

Reset
Long press to restore to factory settings.

LAN Port
Used to connect wired devices.

WAN/LAN Port
On main router: as WAN port, used to connect to modem.
On sub router: as LAN port, used to connect wired devices.

LET’S GET STARTED

Download the Vilo App
Download and install the Vilo App on your phone.
Add your first Vilo
Follow the on-screen instructions in the app to add your first Vilo and set up your Wi-Fi network.
Add additional Vilos
Add additional Vilos by tapping the “+” sign in the Vilo App and following the on-screen instructions. Repeat this process until all your Vilos are connected.

IN THE BOX

• Vilo 6 Mesh Wi-Fi System
  • x1 (or x2)
• Power Adapter
  • x1 (or x2)
• Ethernet Cable
  • x1
• Quick Start Guide
  • x1

INDICATOR LIGHT GUIDE

Solid white light

• Main router: Connected to broadband.
• Sub router: Connected to the main router and signal is strong.

Flashing white light

• Main router: Connection to broadband is intermittent.
• Sub router: Connected to the main router but signal is weak. Try moving it closer to the main router.

Solid amber light

• Main router: Ready for configuration.
• Sub router: Ready to connect to the main router.

Flashing amber light

• Sub router: Pairing and syncing with the main router.

Solid red light

• System is starting up. This will take about a minute.

Flashing red light

• Main router: Unable to connect to broadband. Follow these steps to troubleshoot:
  • Make sure the WAN/LAN port is connected to the modem with an Ethernet cable.
  • Make sure the Ethernet cable is securely plugged in and not damaged.
  • Check if the modem’s broadband settings are correct. If the Internet access method is DHCP, the router can directly access the Internet. If the Internet access method is PPPoE, make sure you have entered the correct broadband account name and password provided by your broadband operator.
  • Check if your broadband connection is working properly.

Sub router: Unable to connect to the main router. Follow these steps to troubleshoot:

1. Move the sub router closer to the main router.
2. Reset the sub router to factory settings.
3. Make sure you have completed the setup process in the app.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

ISED Statement
This device contains license-exempt transmit-ter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
   The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on exposure and compliance. This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

NEED HELP?
Check out our Support page: https://www.viloliving.com/support

STAY CONNECTED

@viloliving
@viloliving

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>