CHEFMAN CW-NMM Milkmade Non-Dairy Milk Maker Instructions
- June 6, 2024
- Chefman
Table of Contents
- PARTS & ACCESSORIES
- DISPLAY CONTROL PANEL
- Recommendation:
- USING THE MILK MADE NON-DAIRY MILK MAKER:
- CLEANING THE MILK MADE NON-DAIRY MILK MAKER:
- DESCALING THE MILK MADE NON-DAIRY MILK MAKER:
- TROUBLESHOOTING
- ERROR CODES:
- TECHNICAL SPECIFICATIONS:
- CHEFWAVE GUARANTEE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Milkmade Non-Dairy Milk Maker
Model: CW-NMM
Please read this manual carefully before using the Milkmade. Save these
instructions.
WELCOME!
Dear ChefWave Customer,
Congratulations on your purchase of the ChefWave Milkmade Non-Dairy Milk
Maker. To ensure your safety and many years of trouble-free operation, please
read this manual carefully before using this product and keep it in a safe
place for future reference.
We hope you enjoy your new ChefWave Milkmade Non-Dairy Milk Maker.
Sincerely,
The ChefWave Team
For technical assistance and warranty service, please email us at
cs@mychefwave.com.
| @ CHEFWAVEKITCHEN
---|---
| @ MYCHEFWAVE
PARTS & ACCESSORIES
- Main Unit
- Grinding Compartment Cove3. Grinding Compartment
- Cover Lock Release
- Display Panel
- Wastewater Basin
- Glass Pitcher
- Steam Cover
- Blade
- Water Reservoir
- Power Cord and Plug
DISPLAY CONTROL PANEL
- Digital Display
- Delay Start Button
- Start/Stop Button
- Select Button
- Volume Selection Button
- Auto Clean Button
- Error Indicator
SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should be observed. Please read and follow these warnings and instructions:
- This appliance is intended for household countertop use only. Do not use this appliance for commercial purposes. Do not use it outdoors. Using it for unintended purposes will invalidate the warranty.
- Keep the appliance and cord out of the reach of children and pets. Appliance should only be used under adult supervision.
- Do not damage the power cord or plug in any way. If the appliance or its power cord has been damaged, it must be replaced by the manufacturer, a service technician, or a similarly qualified person, in order to avoid a hazard. Do not attempt to modify this appliance.
- Do not use the machine for purposes not specified in this manual.
- To protect yourself from electric shock, do not immerse the main unit, cord, or power plug in water or any other liquid.
- Only plug the machine into a grounded outlet. Be sure to use a power outlet with a rated voltage of 120V.
- First, attach the plug to the appliance, and then plug the cord into the outlet. Keep the cord away from hot surfaces. Do not touch the plug or operate the unit with wet hands.
- Do not attempt to alter, disassemble, or repair the machine.
- Do not use external force on the dispense valve.
- The appliance should always remain unplugged from the outlet when not in use. After operating, turn off the power and gently unplug the machine from the outlet. Do not jerk or pull the power cord. Unplug the unit and let it cool down for 30 minutes before cleaning or storing as the heating element will be hot. Avoid contact with skin.
- Keep the machine cover closed during operation.
- Do not heat the glass pitcher on a stove.
- Do not remove the glass pitcher during operation, as this may cause hot liquid to spray out.
- Avoid contact with the steam cover during automatic cleaning process, as hot steam seeps out of the machine during the cleaning process and may cause harm.
- Take care after operating the machine as the glass pitcher, dispenser, and grinding compartment cover will be hot. Make sure to avoid contact with the skin.
- If there are unprocessed ingredients left inside the grinding compartment after use, employ the automatic cleaning function to clean the compartment.
- When making beverages, make sure to use cold purified water.
- The grinding compartment will become stained when using ingredients with dark pigment.
- After adding ingredients to the grinding compartment, make sure to clean the surrounding area of any food residue so that the grinding compartment cover closes completely.
- Do not disconnect power during automatic cleaning.
- Please note that when using the scheduling function, the duration of operation and time of post-operating alarms may vary slightly; this is normal and will not affect the quality of the beverage. The duration of operation will automatically adjust depending on altitude and voltage.
- If a power outage interrupts operation for more than 30 seconds, do not consume the beverage.
- Take care when washing the grinding compartment as it is quite sharp.
- Ensure that the wastewater basin is installed correctly before beginning the automatic cleaning procedure.
- When making beverages, do not add water directly into the grinding compartment.
Recommendation:
- If the machine is used continuously, make sure to clean the machine and its accessories weekly.
USING THE MILK MADE NON-DAIRY MILK MAKER:
Non-dairy milk programs available:
- Almond
- Macadamia
- Soy
- Oat
- Cashew
- Coconut
Sizes include:
- 10 fl. oz.
- 20 fl. oz.
Note: You do not need to use a nut milk bag to strain the pulp from the milk. The ingredients will be ground up sufficiently to create smooth milk.
-
Fill the water tank with 10/20 fl. oz. (as desired). The water level should be at or just above the line.
-
Press the “Cover Lock Release” button at the top of the machine to open the grinding compartment. Pour the dry ingredients into the compartment and close the lid.
Note: Nuts and soybeans DO NOT require presoaking. -
Place the glass pitcher on the stand, and ensure it is locked in place.
-
Press the “Select” button and continue pressing to scroll through the menu. Select the desired non-dairy milk from the list of programs.
-
Press the “Volume” button to select the desired volume of milk.
-
Press the “Start/Stop” button to begin. If you are making 20 fl. oz. of milk, 00:12 to 00:16 will be displayed on the control panel. If you have selected 10 fl. oz., 00:05 to 00:12 will be displayed.
-
The Milk made will remain silent for a few minutes as it begins to steam and presoak the ingredients.
-
As the Milk made enters the grinding/blending phase, there will be some noise.
-
The Milk made will beep when the milk is ready, and milk will start to flow into the pitcher.
-
Enjoy!
The actual time it takes to make milk will vary slightly depending on the program and volume you choose. Helpful Tip: Keep the lid securely affixed to the pitcher to reduce the amount of splatter when the Milk made dispenses milk.
Delay Start: If you would like to schedule the Milk made in advance, press the “Delay Start” button on the control panel. Continue pressing the “Delay Start” button until you reach the number of hours you would like to delay the machine. For example, when the display shows 08:00, it indicates that the milk will be made in 8 hours.
Standby Mode : If the machine is not in use for a few minutes, it will go into standby mode. Simply press the “Start/Stop” button to turn the control panel back on.
CLEANING THE MILK MADE NON-DAIRY MILK MAKER:
The machine will automatically enter “Self-cleaning” mode after the milk- making process. The cleaning cycle is a total of seven minutes, as such the control panel will flash 00:07. Check the water tank at the back of the machine. Water should reach the cleaning mark on the water tank. If there is insufficient water in the tank, the machine will beep. Open the lid and pour more water into the tank until it reaches the cleaning mark. Once the lid is closed the cleaning cycle will begin. The Milk made will beep again when it has finished self-cleaning.
After the machine has completed the cleaning cycle, make sure to empty and clean out the wastewater basin with water. The glass pitcher, water reservoir, grinding compartment cover, and steam cover can all be removed, cleaned with water, and air-dried. The grinding compartment should also be cleaned and air- dried with the cover open.
Additional Cleaning Programs
If the self-cleaning cycle doesn’t sufficiently clean the machine, you may perform an additional cleaning cycle. Choose one of the three cleaning programs below, depending on the level of cleaning intensity you prefer.
- Quick Clean – Press the “Auto Clean” button once for a quick clean. 0:03 will be displayed on the control panel and the “Clean” indicator lights up.
- Deep Clean – Press the “Auto Clean” button twice for a deep clean. 0:08 will be displayed on the control panel, and the “Clean” indicator lights up.
- Dry Clean – Press the “Auto Clean” button three times to choose the cleaning program that will clean without water. 0:10 will be displayed on the control panel. Please note: the “Clean” indicator will not light up.
DESCALING THE MILK MADE NON-DAIRY MILK MAKER:
The machine should be descaled once a month to remove hard-water deposits that can clog the heating elements and water passages.
-
Fill the water tank halfway with a solution of equal parts cold water and a natural descaling agent (juice of one fresh lemon, lime, or white vinegar).
Note: Do not fill the water tank past the max fill line for cleaning. -
Press the “Auto Clean” button and wait for the cycle to complete.
-
Discard the wastewater.
-
To prevent any vinegary or citric aftertaste from seeping into future cups of milk, refill the water tank with cold water and repeat Steps 2 and 3 again.
TROUBLESHOOTING
Error Code
| Problem|
Solution
---|---|---
Indicator light will not turn on| Power cord is not properly plugged in| Make
sure the power cord is completely
plugged in
Display panel malfunction| Contact customer service
Indicator light is on, but the machine does not function properly| No program
selected| Select a program
The water reservoir
is either empty or not
adequately filled| Fill the water reservoir to the appropriate
water level and place the reservoir in its
correct position
Temperature sensor or
water level electrode
malfunction| Contact customer service
The grinding chamber does not intake water| Water pump damaged| Contact
customer service
Water reservoir filter is blocked| Clean the filter at the bottom of the water
reservoir
The motor runs continuously without
pausing| Water has seeped into the machine| Contact customer service
The machine is overheating| Temperature sensor damaged| Contact customer
service
Buttons don’t work| System is not fully reset after a brief power
disruption| Disconnect the power for two minutes before
powering back on
Display panel button malfunction| Contact customer service
Ingredients are not completely broken down| Grinding compartment is too full
or too empty| Add ingredients according to the recipe
---|---|---
Machine failure| Contact customer service
Incorrect program selected| Choose the correct program for the recipe
you are looking to make
Overflow| Incorrect program selected| Choose the correct program function for
the recipe
Grinding compartment is too full| Add ingredients according to the recipe
Machine failure| Contact customer service
Burnt pot| Grinding compartment is not completely clean| Make sure the
grinding compartment is
completely clean before use
Grinding compartment is too full| Add ingredients according to the recipe
Operating duration is abnormally long| Water temperature is too low| Use
standard temperature water
Incorrect program selected| Choose the correct program for the recipe
The beverage is not properly dispensed into
the glass pitcher| Glass pitcher is not positioned correctly| Reposition the
glass pitcher
Dispense valve
malfunction| Contact customer
service
Wastewater is not properly emptied into the excess water basin| Excess water
basin is not positioned correctly| Reposition the excess water basin
Glass pitcher is not positioned correctly| Reposition the glass pitcher
Dispense valve malfunction| Contact customer service
Abnormal noises | Standard machine operation | Occasional noise is normal |
---|---|---|
Abnormal power connectivity | Power disconnects for less than 30 seconds | After |
reconnecting to power, the operation will resume automatically
Power disconnects for more than 30 seconds| After reconnecting to power, the
machine will be reset. The remaining ingredients can be processed and removed
by pressing the cleaning button. After cleaning, new ingredients may be added.
ERROR CODES:
Error Code | Cause | Solution |
---|---|---|
E01 | Gloss pitcher is not positioned correctly | Reposition the glass pitcher |
E02 | The water reservoir is empty, or the reservoir | |
filter is clogged | Add water to the reservoir to the correct water line or |
clean the filter at the bottom of the reservoir
E03| The grinding compartment cover is not installed properly or is missing|
Tightly position the grinding compartment
cover
E04| The excess water in the basin is not correctly positioned or is not
emptied| Position the excess water basin correctly or
empty the wastewater
E05| The motor is overloaded by too many ingredients| Reduce the amount of
ingredients and manually clean the machine. The machine
will overflow if using the automatic cleaning
function when there are too many ingredients.
E06| The upper water electrode is sticky or there are too many ingredients|
Clean the water an electrode or reduce the
amount of ingredients
E07| Abnormal voltage signal| Using a regulated power supply, test to see if
the voltage is below 90V or above 140V
E08| Abnormal internal connection port| Contact customer service
E09| Abnormal internal connection port| Contact customer service
E10| Drink dispense valve is blocked by a foreign object| Disconnect the
power. Remove the obstruction and clean the machine.
Ell| The temperature sensor detects a circuit error| Contact customer service
E12| The grinding compartment temperature sensor
detects a circuit error| Contact customer service
E13| Flowmeter malfunction| Contact customer service
E14| Missing zero-crossing signal| Contact customer service
E15| Grinding compartment heating timeout| Contact customer service
TECHNICAL SPECIFICATIONS:
- Rating Voltage: 120V
- Rated Frequency: 60Hz
- Rated Power: 1000W
- Weight: 11.7 lbs.
- Product Dimensions: 13.6 x 6.5 x 12.8 inches
CHEFWAVE GUARANTEE
This product is guaranteed against defect in materials and workmanship for a period of one year from the date of purchase. Under this guarantee, the manufacturer will repair or replace any parts found to be defective, provided that the product is returned to one of the authorized service centers. This guarantee is only valid if the product has been used in accordance with the instructions and if it has not been modified, repaired, or interfered with by any unauthorized person or damaged through misuse.
This guarantee does not cover wear and tear nor breakables. This guarantee does not affect your statutory rights nor any legal rights you may have as a consumer under applicable national legislation governing the purchase of goods.
If the product fails to operate and needs to be returned, pack it carefully, enclosing your name and address and reason for returns. If within the guarantee period, please also provide proof of purchase.
Milkmade Non-Dairy Milk Maker
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>