TRIP 233621 Noise Cancelling Headphones User Guide

TRIP 233621 Noise Cancelling Headphones User Guide

Packaging List

Button / Interface position

Key function

Light indicators

Turn On and Turn Off

1. To turn on the earphone: press the power button for 1 seconds or above until the indicator light is on.
2. To turn off the earphone: press the power button for 3 seconds or above until the indicator light is off.
3. To switch to Noise cancelling mode: double press the power button, make sure NC switch slide to on.

Pairing

Pair and connect for the first time

1. When the earphone is off, press the power button for over 1 seconds until the yellow and the white lights blink alternatively and you will hear a voice prompt “Looking for device”.
2. Activate the mobile phone Bluetooth, search and connect to the device name“233621 Trip”

Turn On To Reconnect

When the earphone is on, turn it on to hear the voice prompt “Power on”, and the earphone will automatically reconnect to the last device.

Re-pair

1. When the earphone is off, press and hold the power button for over 5 seconds until the yellow and the white lights blink, you hear the voice prompt “Looking for Device”.
2. Activate the mobile phone Bluetooth and connect.
   Notice: The earphone will be powered off within 10 minutes, if there is no device connected to it. When the headset is in the pairing mode, and if there is no mobile it will prompt “Device not found”, and exit the pairing mode. White Led will flash for 5 more minutes before switching on.

Disconnect and reconnect the Bluetooth

1. Manually disconnecting and reconnecting. The earphone will power off automatically if it is not connected to a Bluetooth device within 10 minutes.
2. Bluetooth connection when out of range

a. The earphone which was out of the Bluetooth range will automatically reconnect if it is back in the range, within 10 minutes of disconnection.
b. After 10 minutes, the Bluetooth will have to be manually reconnected.
c. After 20 minutes of disconnection outside the Bluetooth range, the earphone will power off.

Noise Cancellation Setting

1. When bluetooth connected, slide the Noise cancelling switch to On/Off to turn on/off the Noise cancellation.
2. When device power on with bluetooth disconnected, noise cancelling switch slide to on status, double press power button to active “Audio disconnected, Noise cancelling”, this will prevent the device power off in 10 min automatically.

Touch Function

1. Double tap: ambient mode on/off.
2. Triple tap: active mobile phone voice assistant.

Charging

1. When the battery power is less than 10%, the yellow indicator light will flash with voice prompt.
2. While charging, the yellow indicator light is on.
3. When fully charged, the white indicator light is on.

Notice:

A. Charge the earphone via computer or certified charger (output 5v/200mA), the earphone will be fully charged in 3 hours.
B. If the earphone is automatically turned off due to insufficient power, charge the earphone on time.
If the earphone is not charged for a long time, the battery life may be affected.

Voice Prompts

1. Power on: “Power on”.
2. Pairing successful: “Audio connected”.
3. Pairing failure: “Device not found”.
4. Low battery: “Battery low”(<10%).
5. Bluetooth pairing: “Looking for device”.
6. Connection failure: “Audio disconnected”.
7. Power off: “Power off”.
8. Maximum valume: “Beep”.
9. Incoming call when playing music: “Beep Beep” warning when there’s incoming call
10. “Beep” voice after hanging up.

Call Function

1. Press the power button to answer the call.
2. Long Press the power button until you hear the voice prompt, to reject the call.

When the call is active

1. Press the power button to hang up the call.
2. Press the “Volume+”and “Volume-” to adjust the volume

Call Switching

1. Press power button to put the current caller on hold and connect with the incoming call.
2. Long press the power button to continue with the current call and reject the incoming call.
3. While the call is in progress, short press the power button to hang up the ongoing call.

Notice: Some of the mobile phone brands and models may differ in operation. For queries contact sales for support.

Listen to music

To play
Press the power button to play music.

To pause
Music playback will automatically pause if there is an incoming call.

1. Press the power button to pause.
2. Short press the “Volume+” button to turn up the volume.
3. Short press the “Volume -” button to turn down the volume.
4. Long press the“Volume +” button to play the next song.
5. Long press the “Volume -” button to play the previous song.

Music playback will automatically pause if there is an incoming call.

Press the power button once to answer the call, and Press the power button to hang up the call and continue playing music.

Notice: Keep the earphone and the phone within the allowable range, preferably without obstacles. Otherwise the call and music playback quality may be affected or may disconnect.

Regulatory Information

Before using and operating the device, read and follow the precautions below to ensure that the equipment performs optimally and avoids dangerous or illegal conditions

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
   These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment
   into an outlet on a circuit different from that to which the receiver is connected. (4)Consult the dealer or an experienced radio/TV technician for help.

3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 1. Do not use this device in dusty, humid, dirty environment or places near magnetic field to avoid malfunction of the internal circuit of the device. 2. Keep the volume within the allowable range to avoid hearing damage. Prolonged exposure to high volume might result in permanent hearing loss. 3. Exposure to high volume while driving may distract attention and cause an accident. 4. Do not cover, seal or put other items on the earphone.

4. Keep the headphone away from heat sources like electric heaters, microwave ovens, stoves, water heaters, candles or any place with high temperature conditions

5. Do not use an external heating appliance such as a hair dryer or microwave to dry the device.

6. Avoid striking the device to a hard object or vice versa as it may lead the battery to explode or might cause malfunction

7. Wipe the device with a clean, dry, soft cloth. Do Not use the device during cleaning and maintenance.

8. Use and store the equipment in the temperature range of 5°~35°.. When the environmental temperature is too high or too low, it may cause equipment failure. The battery efficiency would be limited when the temperature is lower than 5°

9. Keep the device and its accessories in a ventilated and cool environment without exposing it to direct sunlight.

10. This device is not a toy and children may use this device under adult supervision. This device and its accessories may contain small parts that should keep away from children. Children may inadvertently damage the device and its
    The environmental protection using period of this digital products under normal use is 10 years
    accessories, or swallow small parts resulting in sulocation or other hazards.

11. The device is equipped with non-removable built-in rechargeable battery. Do Not replace the battery by yourself. The battery can only be replaced by authorized service center.

12. Do not disassemble or modify the equipment and accessories without permission, otherwise the equipment and accessories will not be covered under warranty, please contact the authorized service center when the equipment malfunctions.

13. Do not dispose this device and its accessories as ordinary household waste. Comply with the local laws and regulations dealing with this device and its accessories and support recycling.

14. In medical and health care facilities where the use of wireless devices is prohibited, comply with the regulations of such facilities and turn off the devices.

15. Radio waves generated by devices may affect the normal operation of implantable medical devices or personal medical devices, such as pacemakers, cochlear implants, hearing aids, etc. If you use any of these medical devices, consult their manufacturer about restrictions on their use.

16. Keep the device at least 15cm away from the implanted medical device such as pacemaker, cochlear implants etc.

17. Use of unauthorized or incompatible power supplies, chargers or batteries may cause fire, explosion or other hazards. User Manual Packing List.

This form is in accordance with SJ/T 11364

: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement specified GB/26572.
ⅹ: Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the part exceeds the limit requirement of GB/T 26572, and there is no mature alternative in the industry, which meets the environmental requirements of the EU RoHS Directive.

The hazardous substances contained in this product are caused by the lack of alternative substances due to current technical limitations

This product is in compliance with the requirements of China’s Administrative Measures for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products and are within the scope of EU RoHS exemption. Special considerations have been made in the design of the product to ensure that the appearance parts are made of non-toxic and harmless green materials. Consumers will not be exposed to harmful substances under normal use and will not cause harm to the human body.

Informational Note for Customers in U.S.A. Only:

1. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

2. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
   (1) this device may not cause harmful interference
   (2) this device must accept any interference received, including interference that may cause undesired operation.

3. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
   These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4)Consult the dealer or an experienced radio/TV technician for help.

4. This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.

Informational Note for Customers in ED Only:

This product has been manufactured by or on behalf of Shenzhen Grandsun Electronics Co., Ltd. Hereby, Shenzhen Grandsun Electronics Co., Ltd. declares that this equipment is in compliance with Directive 2014/53/EU.

This symbol on the product, the battery or on the packaging indicates that the product and the battery shall not be treated as household waste.

By ensuring these products and batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling. The recycling of the materials will help to conserve natural resources.

In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only.
To ensure that the battery and the electrical and electronic equipment will be treated properly, hand over these products at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the dealer.
This symbol is only valid in the European Union.

Trademarks

1. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG. Inc. and any use of such marks by Shenzhen Grandsun Electronics Co., Ltd. is under license.
2. Qualcomm aptX is a product of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission.
3. “233621” word mark and logos are registered trademarks of Shenzhen Grandsun Electronics Co.,Ltd. Reproduction in whole or in part without written permission is prohibited. Other companies and products mentioned herein are trademarks of their respective owners.

Product service policy

1. The earphone warranty period is 12 months from the date of purchase. Repair and maintenance service is free during the warranty period, excluding malfunctions are man-made.
2. The limited warranty shall not apply to: a, manmade damage; b, exceed the warranty period; c. no warranty card and valid invoice (except those can prove the product is under the warranty period); d, the warranty card is altered or not complied with the product itself; e, the SN label on product is turn on( except those can provide warranty card and efficiency invoice); f. accessories damage due to improper use and maintenance; g, disassemble or amend the products without manufacturer authority or water and smashing damages; h, damages due to force majeure.
3. Service Information
   233621 Customer Service: 400-6233621
   233621 Website: www.233621.com

©2019 Shenzhen Grandsun Electronics Co., Ltd.

References

• 233621官方网站—Spark Passion

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>