KitchenAid W11729759B Bottom Mount Built In Refrigerator Panel Owner’s Manual
- August 28, 2024
- KitchenAid
Table of Contents
KitchenAid W11729759B Bottom Mount Built-In Refrigerator Panel
Specifications
- Width: 600 mm (23.5 inches)
- Cabinet frame wall thickness: 16 mm
Refrigerator Door Panel Installation
- Mount the panel alignment tool onto the refrigerator door. Align the smaller piece with the screws on the bottom of the door, and slide it to the left.
- Peel the protective paper covers off of the adhesive pads on each refrigerator door panel mount.
- At an angle, rest the base of the refrigerator door panel on the panel alignment tool.
- Slowly tilt the panel to attach it to the adhesive pads on the panel mounts. Firmly press against the corners of the door to\ ensure proper attachment.
Freezer Door Panel Installation
- Mount the panel alignment tool onto the freezer door. Align the smaller piece with the screws on the bottom of the door, and slide it to the left.
- Peel the protective paper covers off of the adhesive pads on each freezer door panel mount.
- At an angle, rest the base of the freezer door panel on the panel alignment tool.
- Attach the freezer door with panel by using only upper 4 screws. Remove the tool from the freezer door by sliding it to the right and off of the door.
Install the KitchenAid Badge (optional)
- Peel the paper off of the adhesive backing on the Badge.
- Locate the bottom of the badge, 33/4 (95.3 mm) from the bottom of the Freezer Door, and center it on the door.
FAQs
Q: How do I ensure proper alignment of the door panels?
A: Use the panel alignment tool provided and follow the instructions to align
the panels correctly with surrounding cabinet doors.
Q: What should I do if a door panel does not attach securely?
A: Ensure that adhesive pads are clean and firmly press against the corners of
the door to properly attach the panel.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>