SOUND4YOU 661682 Portable Wireless Stereo Speaker User Manual

Portable Wireless Stereo Speaker
USER MANUAL
661682

USER GUIDE
Congratulations and thank you for purchasing this Schwaiger product. This user guide is designed to help you use and operate the device. Read through the instructions for use carefully. Store this manual safely throughout the product‘s entire service life and pass it on to any subsequent users or owners. Check that the supplied package is complete and ensure that none of the parts are defective or damaged.
Intended use
This two-piece Bluetooth® stereo speaker is used for wireless playback of audio files. The speakers can be connected to smartphones, tablets, computers or other playback devices either via Bluetooth® or a 3.5 mm jack cable and can be operated individually or together.
General safety and maintenance instructions
WARNING

• This product is intended for private, non-commercial household use.

• This product is an electronic product that must be kept away from children. Therefore, keep it out of reach of children.

• Do not drop the product or expose it to strong shocks.

• Do not introduce any objects into the product’s connections or openings.

• Do not disassemble the product into its individual parts. The unit does not contain any user-serviceable parts. Incorrect assembly can cause electric shocks or malfunctions.

• Clean this product only using a lint-free, damp cloth that is as light as possible and does not use any aggressive cleaning agents. In doing this, especially ensure that no water (no fluid or moisture) gets into the product.

• The device is IPX7 certified and therefore protected against water penetration during brief immersion. To prevent damage to the electrical components, do not immerse the speaker in water for more than 30 minutes.
  18. Never expose the loudspeaker to high temperatures or extreme cold.

• Do not use the unit outdoors during storms.

• Keep the speaker away from an open fire.

• To ensure adequate ventilation, do not cover the speaker and ensure that there are no objects in the immediate vicinity (approx. 50 mm) of the speaker.

CAUTION!
Listening at excessively high volume can cause hearing damage!
Always keep the volume at a reasonable level. High volume, even for a short time, can cause damage to hearing.
Important safety instructions on the integrated battery

• The battery is permanently installed in the casing. It cannot be replaced.
• Never throw the product into a fire as it may explode or cause a flame hazard
• Recharge the device battery on a regular basis, even if you do not use it for a longer period of time (about every month). Otherwise, they may become deep discharged and permanently unusable.
• The batteries do not need to be discharged before being recharged.
• Place the product on a surface that is not sensitive to heat when recharging. It is normal for the product to become slightly warm when recharging.
• Dead or damaged batteries may cause skin irritation, so use suitable gloves.
• Leaking battery fluids are highly corrosive and may seriously damage objects or surfaces they come into contact with.
• Do not expose the product to direct sunlight or heat.
  Ambient temperatures should not fall below -5 degrees or exceed +35 degrees.

Product details

| Press and hold until a short beep sounds and the Status LED lights up or goes out.| Power ON/ OFF
---|---|---
| Press| Play / Pause
| Press| Volume up / down
| Press and hold for l second| Next / previous title
| Press| Switching between Bluetooth® and AUX-In mode
| Press| Answering / hanging up a call
| Press and hold for l second| Declining a call|
| Press| Put the current call on hold and accept an incoming call|
| Press and hold for l second| Recall last dialed number|
| Press and hold for 1-2 seconds| Disconnect Bluetooth® connection|

Note:
Please make sure that you have familiarised yourself with the Bluetooth® settings of the devices to be paired in order to exclude possible sources of error during the connection.

Package Contents

Bluetooth® loudspeaker, leather carrying strap, Y Micro USB charging cable, Y 3,5 mm jack cable, User guide Initial operation
NOTE
It is recommended to fully charge the integrated battery before using the product for the first time.
Process:

• Use the supplied Y Micro USB cable and plug the Micro USB connector into the appropriate sockets on the back of the products.
• Now connect the USB plug of the charging cable to a USB charging adapter or an active USB socket (e.g. laptop or computer).

The speaker automatically turns off when the battery charge is less than 3%.
Modes and functions

Power ON/OFF

• Press the POWER ON/OFF button until a short beep sounds and the Status LED light turns on.

• Press the POWER ON/OFF button again until a short beep sounds and the Status LED light turns off.
  Pairing mode (Bluetooth® pairing)

• Turn on the speaker as described above.

• Search and select “WBS20” in the Bluetooth® settings of your mobile device.

• The Status LED will turn blue permanently when the speakers are connected to your device.

NOTE:

• The loudspeaker should be no further than within a radius of 10 m around your device.
• If the speaker is on, it will automatically connect to the last connected device, if available. If not, the speaker switches to pairing mode (The speaker can store a maximum of 8 already connected devices)
• The speaker turns off automatically after 10 minutes if it is not connected to a device during this time.

Disconnecting Bluetooth® Connection (uncoupling)
Press and hold the! -button for 1-2 seconds until the LED status light flashes rapidly blue.
TWS connection
The speaker includes the True Wireless Stereo (TWS) function, which allows it to be connected to another speaker via Bluetooth® for true stereo sound.
To activate, follow the steps below:

1. Place the two speakers side by side so that the distance between them does not exceed 5-7 meters.
2. Turn on both speakers as described above. Press and hold the -button on either speaker for 2 seconds, and the Status LED light will quickly flash blue and green alternately. This speaker now serves as the main speaker (MASTER) with playback on the left stereo channel. The two loudspeakers then automatically connect to each other. The second loudspeaker now functions as a slave loudspeaker (SLAVE) with playback on the right stereo channel.

Disconnect TWS connection
Press and hold the -button on either speaker for 2 seconds until the Status LED light flashes rapidly blue.
Connection via AUX input

1. Turn on the speaker as described above.
2. Use the supplied 3.5 mm jack cable to connect your external device to the AUX-In connector of the speaker.
3. The speaker will automatically switch to AUX-In mode and the Status LED light will turn steady green.

NOTE:

• In AUX-IN mode, the “Skip Songs” and “Handsfree”  functions are not available. In this mode, operation isexclu-sively via the connected playback device.
• To return to Bluetooth® mode, simply pull the 3.5 mm jack cable out of the socket on the loudspeaker.

Resetting the speaker
If you experience problems with the speaker, you can easily reset it. To do this, disconnect it from the charger cable and gently push a thin needle (diameter <3 mm) into the RESET hole provided for this purpose for 2 seconds until the status LED light goes out. The RESET hole is located on the back of each speaker next to the AUX input.

Troubleshooting

Speaker does not turn on
Charge the speaker and make sure it has enough power.
Speaker does not connect to my device
Please check the following:
The Bluetooth® device supports Bluetooth® A2DP profiles; The speakers are within 10 m or less of your device; The loudspeaker is in pairing mode (LED status light is blue or red).
No sound
Make sure that the volume on both the speaker and your device is set to an audible level. Make sure that your device is successfully connected to the speaker. The Status LED light is permanently blue.
Poor sound quality
Reduce the distance between the speaker and your device and remove any obstructions in between.

Technical data

Cleaning and maintenance

This product is maintenance-free. You must disconnect the device from the main socket before cleaning. Ensure that no liquids get into the product while you are cleaning it. The use of solvent-containing or aggressive cleaning agents, as well as alcohol or thinners, is prohibited as it could damage the coating or the surface of the product. You should therefore clean the product with a lint-free, ever so slightly damp soft cloth only.

Disposal

The product is delivered in packaging made of recyclable materials to protect against damage during transport. Sort and dispose of these materials in the designated containers. Ask your local disposal company or local council about how to dispose of the product in an environmentally correct way. Do not dispose of batteries or electric and electronic devices in the normal household waste. The consumer is legally obliged to return electrical and electronic devices and batteries that are at the end of their useful life to the point of sale or public collection points that have been set up for this purpose. Legislation in the country of use stipulates the specific requirements regarding disposal. The symbol on the product, the user guide, or the packaging indicates this legal requirement.
Disclaimer
Schwaiger GmbH does not accept any liability or warranty for damages that are sustained due to improper installation or mounting, improper use of the product or non-compliance with the safety instructions.
Manufacturer’s information
Dear Customer, please contact our Technical Support if you need technical advice and your retailer is unable to help you. Our technical support is available in English or German.
Information on warranty
The warranty period starts when the device is purchased. The purchase receipt serves as proof of this date. Keep these documents in a safe place. Our warranty is based on our warranty conditions valid at the time of purchase.
Simplified declaration of conformity as per the RED Directive
Schwaiger GmbH hereby declares that the described radio system product complies with Directive 2014/53/EU and other directives applicable to the product. The complete EU declaration of conformity is available online at: http://konform.schwaiger.de

661682 Schwaiger GmbH
Würzburger Straße 17
90579 Langenzenn
Hotline: +49 (0) 9101 702-299
www.schwaiger.de
info@schwaiger.de
Geschäftszeiten: Montag bis Freitag: 08:00 – 17:00 Uhr
Office Hours: Monday
to Friday: 8:00 a.m. – 5:00 p.m.
661682_BDA

References

• Schwaiger GmbH
• Schwaiger GmbH

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>