IMOU IPC-A46ZP Ranger Pro Z 4MP WiFi PTZ IP Camera User Guide
- June 6, 2024
- imou
Table of Contents
IMOU IPC-A46ZP Ranger Pro Z 4MP WiFi PTZ IP Camera User Guide
Thank you for choosing IMOU.
We are devoted to providing you easy smart home products. If you have problems
using the product, please contact our service team before returning your
product.
Our service mail: service.global@imoulife.com
Frequently asked questions can be found at imoulife.com/support/help
Packing List
-
Camera x1
-
Power Cablex1
-
Power Adapter x1
-
Quick Start Guide x1
-
Screw Package x1
-
Positioning Mapx1
Camera Introduction
Note: Press and hold the reset button for 10 s to reset the camera.
The pattern ofthe LED indicator is included in the following table.
| Indicator light status | Device Status |
|---|---|
| Spinning red | Booting |
Device malfunction Failed to boot up
Spinning green| Booting completed
Waiting for Wi-Fi configuration
Flashing yellow| WiFi connection process
Device has been configured with WiFi,
but it failed to work normally
Flashing green| WPS pairing
Blue light stably on| Wi-Fi connection succeeded
Operate normally
Flashing blue| Device upgrade
Flashing red| SD card malfunction
Tips
To ensure the best possible wireless performance, please make sure there are no obstacles and electromagnetic interference between the camera and router.
Ceiling Mounting (Optional)
Troubleshooting
Problem
|
Solution
---|---
Cannot set up camera|
- Ensure your mobile device and the camera are within range of your Wi-Fi router.
- Ensure the LED indicator on the camera is flashing green before beginning setup.
The app says “Failed to bind”| The camera is already connected to Wi-Fi, but the router is:
- Not connected to Internet.
- Poor network status
- The Wi-Fi signal is not stable due to obstacles or electronic interference
No picture / signal|
- Ensure the LED indicator on the camera is flashing steady green. See ‘LED Status’ section for details if otherwise.
- Ensure the camera is properly connected to power using the included USB power adapter.
- Try repositioning the camera, router, or both to improve signal strength.
Picture is not clear|
- Check the camera lens for dirt, dust, spider webs. Clean the lens with a soft, clean cloth.
- Remove the vinyl cover on the camera lens.
No audio|
- Ensure audio function on camera is turned on.
- Ensure audio is turned up on viewing device.
Camera stuck downwards|
- Turn off Camera Shielding in Device Settings on the Imou Life app.
Phone is not reading QR code|
- Clean the camera lens of your Smartphone
- Ensure that there is enough light on the QR code
- Don’t hold the QR code too close to the camera
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>