IMOU IPC-C22E Cue 2 Wireless WiFi Camera User Guide
- June 6, 2024
- imou
Table of Contents
IMOU IPC-C22E Cue 2 Wireless WiFi Camera
Packing List
Camera
x1
|
Power
Adapter x1
|
QSG x1
---|---|---
Power
Cable x1
|
Mounting
Foam x1
Camera Introduction
Note: Press and hold the reset button for 10 s to reset the camera.
The pattern of the LED indicator is included in the following table.
Off|
- Powered off/LED turned off • Rebooting after reset
---|---
Red light on|
- Booting
- Device malfunction
Green light flashing| Waiting for network
Green light on| Operating properly
Red light flashing| Network connection failed
Green and red lights flashing alternately| Firmware updating
Operating with lmou Life App
Step 1
Scan the following QR code or search “”Imou Life” in Google Play or App Store
to download and install the app.
Note: If you have installed the app, update it to the latest version.
Step 2
Run lmou Life App, and then register an account for the first use.
Step3
Connect the camera to power source with the power adapter.
Step 4
mera indicator flashes for booting to be finished, and then the camera with
green light
Step 5
Do the following operstions to finish adding camera
Note:
- If you have more than one camera, do step 5 to add them one by one.
- If the Wifi network has changed or the indicator status goes wrong reset thre camera, and then do sleep 5 to add it again
Installing Camera
Note: Make sure that the mounting surface . is sm ooth and strong enough to hold at least three times of the device weight.
Step 1 Stick the mounting foam on the camera pedestal.
Step 2 Power up the camera.
Step 3 Adjust the momtonng angle as needed, and then attach the pedestal
on the mounting surface, press and hold it for 10s.
FAQ
► Q: How to reset the camera to factory default?
Press the reset button for 10 s, then the camera will restore to factory
default and reboot automatically.
► Q: The device cannot boot up?
Check the LED indicator status. If it is not green light on, reset the camera
and configure the camera again.
► Q: What is the Wi-Fi pAssword of the camera’s Wi-Fi signal?
The password is the safety code on the device label.
► Q: The device is offline?
Check the indicator status:
- If the green light is on, check whether the router can connect to the Internet. If Internet is working, restart the camera.
- If the red light flashes, reset the camera, and then configure the camera again.
- If the red light is on, it means the camera is faulty.
► Q: How to connect the camera to a new Wi-Fi?
- If camera is online, select Device > Network Config to change the Wi-Fi connection.
- If camera is offline, reset the camera, and then configure the camera again.
For more questions, please visit www.imoulife.com/web/support/help, or scan the QR code below.
