Drchop RGBFL-120 Corner Floor Lamp User Manual

Drchop RGBFL-120 Corner Floor Lamp User Manual

After-sale Service

• Please read the user manual before use.
• Suggest Indoor use.It is non waterproof.
• Please use the included power adapter, do not use other brand’sadapter. Do not plug or unplug the power cord with wet hands.
• If you have any questions when operating the product or the floor lamp is defective,pIease feel free to contact the service mail . We will help u solve the problems and we can send u free replacement.
• Service Email address for Drchop after-sale service: drchopsupport@163.com

Product Introduction

Package  Contents

• 1 x Lamp body
• 1 x Round chassis
• 1 x Controller
• 1 x Manual
• 1 x Adapter
• 1 x Screw
• 1 x 6-point tool

Installation Method

After carefully unpacking, combine the two base brackets and tighten them with the tools in the package, and finally insert the lamp into the bracket.

Controlling By Control Box

 On/Off button: Short press to turn on/off the strip lights, log press 5 seconds, the LED controller will start Wi-Fi config.

Bright/ speed adjustment: Short press to switch speed circularly, long press to switch bright circularly.

Music/ Mode/ Scene adjustment: Short press to switch the scene circularly; double press to switch the mode between the static/ pre-set/ custom/ music circularly; long press to enter in/ exit out music mode.

Smart Life Control

Step A: Smart Life app installation

Please choose either way below to download and install the app.

1. As per your phone system, choose the QR code to scan Android
2. Search keyword”Smart Life”in Apple Store or Google

Step B: Create an account on Smart Life and login
Note: Please keep your account and password in mind for Alexa or Google Assistant App pairing later.

Step C: Add the light to Smart Life App

1. Tap ‘+’ button on top right corner to add device, then tap lighting-EZ Mode devices to enter next
   

WiFi Connection

This smart light only supports 2.4GHz WiFi network, not 5.0GHz Please make sure your working network is 2. 4GHz, and your phone is connected to the required wiFi network.

1. Power on the bulb with your own
2. When in EZ Mode, press and hold the power button of the Corner Floor Lamp receiver for 5s until it flashes, the light blinks rapidly (about 0. 5s per blink)-EZ Mode is the way for a Wi-Fi connection. When the light is in AP Mode, you can change loes Mode Dy press button for 5-8 seconds to activate the light into rapid blinking status(about 5s per blink ON/OFF)
3. Confirm the Light is in EZ Mode, then tap the ‘Confirm button to proceed. If you need help, tap “view help” for more details.
4. Enter your WiFi password, tap “ok” button and wait till it is success-fully connected.
   

Step D: Give a name to the light

• A simple name is recommended for easier voice recognition with Alexa or Google Assistant.
• The name given to the light will be the same for voice control on

Alexa or Google Assistant. For example, the light is named “smart light” on this user guide.

Step E: The named light will be shown on the app homepage. Now you can control the light (turn on/off, change colors, adjust brightnessect) with Smart Life on the setting page Turn on or off the light by tapping the light icon.

Welcome Home
Note: To control the light with Amazon Alexa, please read Part Two. To control the bulb with Google Assistant, please read Part Three directly

How to control the smart lig ht ba r th rough the Smart Life application

1. Turn on/off the light, select the color and brightness

2. Choose a usage scenario

3. The color will change with the rhythm of the music

4. Send commands through the microphone to control the lights.
   

How to control the light with Amazon Alexa?

Way 1:
StepA: Log in to Smart Life App, click your smart divice, click “small arrow” in top right corner.
StepB: Click Alex a in Third-party Control.
Step C: Sign in with your Alexa account.

Step D: Click LINK.

Step E: Linked successfully, when add new device, it is no need to link again, just discover new device in Alexa.

Way2:
Step A: Open the Alex a App and go to Skills in the menu.
Step B: Search for Smart Life then click Enable.

Step C: Authorize your account with Smart Home Skills using the username and password from your Smart Life App.
Step D: Choose “Discover Devices”. After a few seconds your Smart Life devices will be displayed under Smart Home in the Alex a app.

How to control the light with Google Assistant?

Step A: Open the Google Home App and go to Home Control in the menu.
Step B: Tap “+” button on the bottom right to enter next page


Step C: Find “Smart Life” from side bar list.
Step D: Authorize your account with Google Assistant using the username and password from your Smart Life app.

Now your Google Home app and Smart Life devices are linked! You’re now able to say “OK Google” and control your Smart Life devices.

Detailed parameter

Brand

| Drchop
---|---

Color

| Black
Lifespan|

50,000Hrs

Light ource

| 172 pcs LED
Controlled by|

WIFI

Power Consumption

| 28w
Product Size|

13 7It      7›8455nJ 2 in

Product Name|

RGB Floor Lamp

Warm Trips

1. Please check whether the device is connected with power and your phone is connected with Wi-Fi.
2. Check routers: If the router is dual-band router, please select a 2.4GHz network to add device. You also need to open the router broadcasting
3. WiFi password does not allow special character, and should be within 16
4. Please keep good network, the sending speed is related to the network of your mobile phone and
5. Please contact us anytime if you need support, we offer service all the

Thank you for choosing

SIAt#B¢O Corner Floor Lamp
Service Email address for Drchop after-sale service:
drchopsupport@163.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>