VACOS Cam IR Outdoor Rechargeable Battery/Solar Powered Wireless IP Security Camera User Guide
- June 6, 2024
- VACOS
Table of Contents
Vacos CamIR
QUICK START GUIDE
About This Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website. Please use this user manual under the guidance of professionals.
Legal Disclaimer
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY RESPONSIBIUTES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. OUR COMPANY SHALL NOT BE UABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Regulatory Information
FCC compliance:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.
EU Conformity Statement
This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2004/108/EC, the RoHS Directive 2011/65/EU and Amendment (EU)2015/863.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info
2013/56/EU (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info
Cautions
- Make sure the power supply voltage is correct before using the camera.
- Do not drop the camera or subject it to physical shock.
- Do not touch senor modules with fingers. If cleaning is necessary, use clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an extended period, replace the lens cap to protect the sensor from dirt.
- Do not aim the camera at the sun or extra bright places. Blooming or smearing may occur otherwise (which is not a malfunction), and affect the endurance of sensor at the same time.
- The sensor may be burned out by a laser beam, so when any laser equipment is in using, make sure that the surface of sensor will not be exposed to the laser beam.
- Do not place the camera in extremely hot, cold or dusty, and do not expose it to high electromagnetic radiation.
- To avoid heat accumulation, good ventilation is required for operating environment.
- The security camera supports outdoor and indoor use. Please make sure the camera power connector is waterproof.
What’s in the Box
1x Vacos Cam IR 1x Outdoor Screw Bracket
1x Screw Kit 1x Power Cable
1x User Manual 1x Surveillance Sign
Product Introduction
- USB Interface
- Speaker
- Light Sensor
- PIR Sensor
- Indicator Light
- IR Light (IR) or Supplement Light (Vacos Cam)
- Lens
- Microphone
-
Reset Button
(Press for more than five seconds to reset the device to factory settings.) -
Charging Indicator
Setup Button/Indicator Light| Operation/Indicator Light Status|
Details
---|---|---
Reset Button| Slightly Tap| Wake up the Camera
Long Press| Reset the Camera
Indicator Light| Slow Flashing Red Light| Ready for WiFi Connecting
Fast Flashing Red Light| WiFi Connecting
Solid Blue Light| WiFi Is Connected
Solid Red Light (Charging Port)| Camera in Charging
Solid Blue Light (Charging Port)| Camera Charging Completed
1. Charge the Camera with a power Adapter
The camera is built-in battery. Before operation. please use the USB power
cord and DC5V power adapter (not included) to fully charge your device.
There is an indicator light near the power port, Red means the camera is
charging
Note: Please fully charge the camera when you use it at the first time.
2. Preparation
2.1. Search for Vacos Smart in App Store or Google Play. Download and install it into your phones or tablets.
Vacos Smart
Apple and the Apple logo are trademarks of Apple lnc.
Google Play and the Google Play logo are trademarks of Google lnc.
2.2. The camera only supports 2.4GHz Wi-Fi, Please don’t connect it with
5GHz WIFI.
2.3. Your WiFi should be encrypted by WAP/WAP2, and make sure there are
no special characters in the name and the password of WiFi.
2.4. When connecting, please ensure that the wifi signal is smooth and
stable. We recommend t within 3-5m away from the router to ensure a successful
connection.
3. Create Your Vacos Account
New users need to sign up by email. Click Sign Up , follow the steps to complete the registration, and then log in. (Picture 1, 2, 3)
Picture 1 Picture 2 Picture 3
4. Set up the Device
Turn on the camera by pressing the reset button. Now the camera is in standby mode. When LED indicator flashes red, the camera is ready for setting.
Note: If your camera won’t turn on, please charge it with a DC 5 V adapter or solar panel for 15 minutes. After that, reset the camera by pressing the reset button. You will hear a prompt tone after the reset succeeded.
5. Add the Device
5.1. Tap Add Device icon “+” to add your device and then choose Battery
Camera. (Picture 4, 5)
5.2. Choose Next for the reset tips. (Picture 6)
Picture 4 Picture 5 Picture 6
5.3. Enter the WiFi password, and then click Next. (Picture 7)
5.4. A QR code will be shown on your phone. Please scan the QR code with
the camera. (Picture 8, 9)
Picture 7 Picture 8 Picture 9
5.5. You’ll hear a prompt tone after the scan succeeded. Tap Next on the
app. You will hear a prompt tone indicating WiFi connecting. When the app
screen shows 100% connecting, the camera is connected to your WiFi. (Picture
10)
5.6. When the camera is online, you can name your camera, and then click
Done. (Picture 11)
Note: If the camera fails to connect the WiFi, please reset the camera
and try again.
5.7. Now you can get live view. (Picture 12)
Picture 10
Picture 11
Picture 12
Note: When the camera fails to scan the QR code, please select the AP
mode for pairing
AP mode: Select “ Help ” and click “ More Options ”, Select “
Manually Configuration ” to complete all operations follow the prompt If
it still failed, please share your problem to support@vacos.com for our
technique support, we will have a complete solution for you include video
guide, FAQ, User manual etc.
6. Notes on Camera Installation
Find the Best Spot for the Camera
Please install the camera 2-3 ( 7-10 ft) above the ground. The detection range
of the motion sensor would be maximized at such a height.
It is not suggested to install the camera vertically towards the moving
objects, otherwise, it may not detect the motion events or cause delay.
It is suggested to make the angle between PIR Sensor and detected objects more
than10 degrees.
The Camera motion sensor is much more sensitive to side-to-side movement
across its field of view than to movement directly toward or away from the
camera.
6.1. Mount the Camera Outdoors with the Screw Bracket
6.1.1. Please drill 3 holes based on the drill template. Make sure the installation position is at a thick wall made from hard materials such as concrete, brick, or stucco. Fix the bracket to the wall with the screws.
1 Screw Hole
6.1.2. Screw the camera to the bracket. Make sure the camera is stable against external forces.
6.1.3. Adjust the camera for an ideal angle of view to cover your desired areas.
7. FAQ
Q. Cannot add camera for the first time?
A. When adding a camera for the first time, make sure that the camera is
powered on and the working status light flashes slowly in red.
1. Make sure the WIFI user name and password are correct.
2. The camera only supports 2.4GHZ WIFI, 5g band is not supported. please
do not use 5G wifi to configure the network.
3. When adding a camera, ensure that the network is smooth, and it is
recommended to connect near the router as much as possible.
4. If the QR code is unsuccessful in the network configuration, try to
manually configure the network; try not to set complex WIFI password and do
not contain special characters such as \’. ect
5. If the two methods still do not match the Internet, it is recommended
to restart the router and try again.
6. Provide the nameplate label of the router
Q. No response to QR code scanning?
A.
1. Make sure that the QR code of the mobile phone is 15~20cm away from
the camera lens when scanning the code, you can try to scan the code from
multiple angles;
2. The QR code generated by the mobile phone may be abnormal. This
situation maybe caused by new mobile phones or non-mainstream models. At this
time, provide us with a screenshot of the QR code and the mobile phone model
system version;
3. Make sure that the lens is clean, you can try AP network
configuration, and check whether the lens has virtual glue after matching the
Internet;
4. If all the network distribution methods are failed, and the camera
does not respond when the network is distributed, the camera may be defective,
please contact us .
Q. Why the camera is always disconnected/offline?
A. Network problems will cause the camera disconnected.
Solution:
1. Ensure that the place where the camera is installed can get a smooth
WIFI signal, it is recommended to be above 75%. You can use the “installation
guide” in the APP to perform network diagnosis, determine where you install
the camera, and whether the camera can get a smooth WIFI network.
2. Restart the camera and router.
3. Judge whether the power of the camera is sufficient. When the battery
is low, the camera will automatically turn off.
4. Take the camera next to the router and observe whether play the video
is smooth. If the camera is still offline, it may be due to the camera
hardware failure, please contact customer service.
Q. Why the camera consumes power fast?
A. The battery life of the camera depends on the times the camera works.
The more times the camera is wakes up, the faster the battery will be
consumed. According to laboratory test data, if the camera is triggered 15
times a day, the battery can be used for 3-5 months. If your camera battery
drains very quickly, please check if the camera is triggered too many times.
It is recommended to place the camera in a working environment with a smooth
and stable network.
Shenzhen Kean Digital Co., Ltd.
Address: Room 1001, Rujun Building, No.105 Center Road,
Bantian Street, Longgang District, Shenzhen, 518129, China.
support@vacos.com
vacos.com
FCC ID: 2AKL2K44IPC
Made in China
THEMIS AR Unterstützung UG
Beedstrasse 54, In Dusseldorf, (40468), Deutschland
References
- Vacos: Global Pioneer in Smart Home — vacos American Express Apple Pay Diners Club Discover Elo Facebook Pay Google Pay JCB Mastercard PayPal Shop Pay Venmo Visa
- HOME
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>