4K5 HR HL 200A HeadLight Instruction Manual
- September 3, 2022
- 4K5
Table of Contents
BETTER EQUIPMENT
HL 200A
1. EIN- / AUS- Schalter
2. Kopfleuchte 90° absenkbar| 3. Rubber insert
4. Battery compartment
---|---
Completely read through the operating instructions as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. This document must be kept in a safe place and if the laser device is passed on, this document must be passed on with it.
Function / Application
HL 200A is a splash-proof, sturdy head torch for use when camping or in the workshop. The head swivels up to 90° in steps for optimum illumination of the working area. The elastic strap can be adjusted to any head size. A rubber insert prevents the torch slipping or shifting out of place. Two light levels are available. This product is not suitable for diving.
General safety instructions
- The device must only be used in accordance with its intended purpose and within the scope of the specifications.
- Modifications or changes to the device are not permitted, this will otherwise invalidate the approval and safety specifications.
- Do not expose the device to mechanical stress, extreme temperatures, moisture, or significant vibration.
- Do not point the beam of light directly into the eyes of people, particularly those wearing glasses or contact lenses (high dazzling effect) or animals.
- Under no circumstances should you look directly into the light produced by this device or when it is reflected off specular surfaces.
- Close your eyes and move your head away from the beam of light if optical radiation hits your eyes.
- Avoid heat build-up during use, for example, due to the covering the device.
- When storing, remove the batteries from the torch. Do not place the torch in front of inflammable material when in use. It could ignite. It can reach temperatures of over 60 °C. Do not use the torch in traffic. Do not leave the torch unsupervised with children.
Disposal of batteries
In accordance with the guideline 2006/66/EC, defective or depleted batteries or cells must be separated and taken for recycling in an environmentally appropriate process.
Safety instructions
Using artificial, optical emission (OStrV)
| Risk Group 2
CAUTION: Possibility of harmful optical radiation. Hazard for retina from
blue light between 400 and 780 nm. Do not look into the lamp for longer
periods during operation. Can be harmful to eyesight.
---|---
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents, and solvents. Remove the battery (ies) before storing for longer periods. Store the device in a clean and dry place.
Technical Data
(Subject to technical changes without notice. 21W02)
| Luminosity high/low | 200 / 100 Im |
|---|---|
| Duration high/low | 6 / 12 hours |
| Protection class | IP 54 |
| Operating conditions | -30°C … 65°C |
| Storage conditions | -30°C 65°C |
| Power supply | 3 x 1.5V LRO3 (AAA)/ |
3 x 1.2V HRO3 (AAA) NiMH
Dimensions (W x H x D)| 66.5 x 44 x 37 mm
Overall weight| 100 g (incl. batteries)
EU directives and disposal
This device complies with all necessary standards for the free movement of
goods within the EU.
This product is an electric device and must be collected separately for
disposal according to the European Directive on waste electrical and
electronic equipment. Further safety and supplementary notices at:
www.laserliner.com/info
SERVICE
Umarex GmbH & Co. KG
Laserliner Möhnestraße 149, 59755 Arnsberg, Germany
Tel.: +49 2932 638-300, Fax: +49 2932 638-333
[email protected]
Rev21W02
Umarex GmbH & Co. KG
Donnerfeld 2 59757 Arnsberg, Germany
Tel.: +49 2932 638-300 Fax: +49 2932 638-333
www.laserliner.com