LAMPEHUSET 45030-050-53 LED T5 Batten Tube Light Instruction Manual
- October 27, 2023
- LAMPEHUSET
Table of Contents
LAMPEHUSET 45030-050-53 LED T5 Batten Tube Light
CAUTION
- Battens of different lengths can be connected to each other and work together but the maximum wattage must be lower than 114W
- Battens of the same length can be connected to each other and work together but the maximum connectable quantity and input current need to follow the table as below:
All the connections of the batten should not be a closed loop. Diameter of cable: 0.75 mm
Pre-Installation
PLANNING THE INSTALLATION
Read all instructions before assembly and installation. Before starting the
installation of the fixture or removal of a previous fixture, disconnect the
power by turning off the circuit breaker or by removing the fuse at the fuse
box. To avoid damaging this product, assemble it on a soft, non-abrasive
surface such as carpet or cardboard.
TOOLS REQUIRED
Installation
Step 1.
Step 2.
Extension usage
If want to extend, remove the cap and connect with the other T5 with the
connector
Option 1:
Option 2:
Connect two T5 battens together, different length combination is possible
Package contents
(parts are not to scale):
Parameters
Care and Cleaning
EXTERIOR MAINTENANCE
- To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
- Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only dry soft cloth to dust or wipe carefully.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>