lampehuset 54805-005-05 Tube 5 LED Rondell Taklampe Instruction Manual
- June 1, 2024
- LAMPEHUSET
Table of Contents
lampehuset 54805-005-05 Tube 5 LED Rondell Taklampe Instruction Manual
Pre-Installation
PLANNING THE INSTALLATION
Read all instructions before assembly and installation. Before starting
installation of the fixture or removal of a previous fixture, disconnect the
power by turning off the circuit breaker or by removing the fuse at the fuse
box. To avoid damaging this product, assemble it on a soft, non-abrasive
surface such as carpet or cardboard.
TOOLS REQUIRED
-
Phillips Screwdriver
-
Flathead Screwdriver
-
Knife
-
Wire Cutter
-
Percussion drill
-
Chopping bit Dia 6 mm
-
Ladder
-
Safety Goggles
Installation (Make sure to turn off the main power)
Step 1.
Step 2.
Step 3.
Step 4.
Installation (continued)
Operation
- Turn on power at the circuit breaker or fuse box.
- Turn the light switch on to activate the fixture.
Package contents (parts are not to scale):
| Part | Description | Quantity |
|---|---|---|
| A | Fixture body with wire | 1 |
| B | Wall expansion particle | 4 |
| C | Self-Tapping screw | 4 |
Light source
Max. LED 41W 3000 Lumen 3000 K (Dilemma) (Lamp grantee: 3 years)
Care and Cleaning
EXTERIOR MAINTENANCE
- To clean the outside of the fixture, use a dry or slightly dampened dean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
- Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>