FURRION FSPK10MWT-BL 100W Kickstand Solar Panel with PWM Bundle Kit User Manual

June 6, 2024
FURRION

FURRION FSPK10MWT-BL 100W Kickstand Solar Panel with PWM Bundle Kit -
logo

100W KICKSTAND SOLAR PANEL WITH
PWM BUNDLE KIT
MODEL: FSPK10MWT-BL
USER MANUAL

FURRION FSPK10MWT-BL 100W Kickstand Solar Panel with PWM Bundle
Kit

Content Includes:

  • 100W Solar Panel

  • 10A PWM Charge Controller

  • User Manual

  • Warranty Manual

  • Product picture for reference only

!!ATTENTION!!

  • DO NOT use around open flammable sources.
  • DO NOT sit on this product.
  • DO NOT hang anything from this product.
  • DO NOT set up on elevated surfaces (roofs, tables).
  • DO NOT hang from elevated supports (trees, ladders).
  • DO NOT set up on uneven surfaces/terrains.
  • DO NOT set up or place wiring in any standing water.
  • DO NOT place wiring in travel paths (walking, vehicle).
  • DO NOT place panels in shaded areas (RV, trees, etc.).
  • ONLY use this product as intended, with Furrion products, any modification will void the warranty.

SETUP AND OPERATION

FURRION FSPK10MWT-BL 100W Kickstand Solar Panel with PWM Bundle Kit - figure
1

NOTE: Ensure the panel has a stable footing.

CONNECTION

Charge Furrion ePod™ Power Station
Connect solar panel directly to Power station DC input (with battery installed – see ePod power station manual for charging)

FURRION FSPK10MWT-BL 100W Kickstand Solar Panel with PWM Bundle Kit - figure
2

Charge Furrion eRove™
Connect solar panel directly to eRove cooler solar input (with battery installed – see above manual for charging)

FURRION FSPK10MWT-BL 100W Kickstand Solar Panel with PWM Bundle Kit - figure
3

Charge 12V Battery

  1. Connect solar panel directly to 10A PWM charge controller (provided).
  2. Connect the controller to Furrion® solar inlet.
  3. Setup controller and charge.

FURRION FSPK10MWT-BL 100W Kickstand Solar Panel with PWM Bundle Kit - figure
4

SETUP 10A PWM CHARGE CONTROLLER

10A PWM Charge Controller Status Indicators

LED indicators Indications Status Functions

Charging

| Solid on| Solar panel has voltage
Solid off| Solar panel has no voltage
Slow flashing| Charging  in process
Quick flashing| System overvoltage
|

Battery

| Solid on| Normal battery function
Solid off| Battery  is not connected
Slow flashing| Battery  is under voltage
Quick flashing| Battery is over-discharged

Battery Type Selection Method

  • Press the button for 3 seconds. The LED will begin to flash indicating that the mode can be changed.
  • The LED number will cycle from 1 to 4 when the button is pressed.
  • When the desired battery type number appears, wait until the LED stops flashing or press the button again for 3 seconds to complete the setting.

Numeric
Indicator

| Battery  Type| Numeric
Indicator|

Battery  Type

---|---|---|---

1

| Sealed lead-acid batteries|

3

| Flooded lead-acid batteries

2

| GEL lead-acid batteries|

4

| Lithium iron phosphate batteries

HANDLING AND ROUTINE MAINTENANCE

  • ALWAYS carry the product by lifting handle.
  • ALWAYS keep the glass clean to maximize efficiency.
  • ALWAYS lock folding legs in position with turn knob.
  • ALWAYS check wiring and connector quality.
  • ALWAYS protect glass surfaces when handling/storing.
  • ALWAYS maintain batteries as per manufacturer.

CLEANING INSTRUCTIONS

  • ONLY use warm soapy water and a clean cloth.
  • NEVER use acidic solutions as they may frost/damage the glass.

SPECIFICATION

Mechanical Specifications


Solar Cell Type| Monocrystalline
Cell Size| 61/8” x 61/8” (156mm x 156mm)
Product Size| 344/16” x 266/16” x 17/16” (870mm x 670mm x 35mm)
Number of Cells| 20
Weight| 17.6lbs (8.0kg) ± 10%
Cable Length| 1811/8” (4.6m)
Type of Connector| DC Connector
Junction Box| IP65 rated (dustproof, water-resistant)

Working Specifications

Power Tolerance| -5%, +5%
Operating Temperature| -40°F – 185°F (-40°C – 85°C)
Max System Voltage| 30V
Max Series Fuse Rating| 15A
Normal Operating Cell Temperature| 113±3.6°F (45±2°C)
Electrical  Specifications ( Standard Testing Conditions=25°C, 1000W/m2 irradiance and AM=1.5)
Max System Voltage (IEC/UL)| 600V
Maximum Power Pmax| 100W
Power Tolerance| ±5%
The voltage at Maximum Power Point Vmp| 17.0V (±4V)
Current at Maximum Power Point Imp| 5.92A (±2A)
Open Circuit Voltage Voc| 20.9V (±4V)
Short Circuit Current Isc| 6.13A (±2A)
Cell Efficiency (%)| 21.0% (±5%)
Module Efficiency (%)| 17.15% (±5%)
Temperature Coefficient of Voc| -0.08%/°F (-0.30%/°C)  per degree above 77°F (25°C)
Temperature Coefficient of Isc| +0.02 %/°F (+0.06%/°C) per degree above 77°F (25°C)
Temperature Coefficient of Pmax| -0.11 %/°F (-0.41%/°C) per degree above 77°F (25°C)

FURRION FSPK10MWT-BL 100W Kickstand Solar Panel with PWM Bundle Kit -
logo Furrion Innovation Center & Institute of Technology
● 52567 Independence Ct., Elkhart, IN 46514, USA
Toll free:1-888-354-5792
● Email: support@furrion.com
©2007-2020 Furrion Ltd. Furrion® and the Furrion logo are trademarks licensed for use by Furrion Ltd.
and registered in the U.S. and other countries.
FURRION.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals